Billion 7800N with BT Broadband...

Forgive the cross post (with the BT forum) - wasn't sure which to post on!

I just bought a new Billion 7800N and got it up and running with my ADSL2+ connection (BT). The status looks like this:

Parameters
DSP Firmware Version A2pB025f.d22k
DMT Status No Defect
Operational Mode G.DMT
Upstream 448
Downstream 5824
SNR Margin(Upstream) 19.0
SNR Margin(Downstream) 10.0
Line Attenuation(Upstream) 25.5
Line Attenuation(Downstream) 41.0

I'm not sure if these are good/bad/indifferent, or what I can do (if anything) to improve them. Can anyone check them over and give me some advice?

Thanks.

In reply to a post by RobinsonUK:

Forgive the cross post (with the BT forum)

Nope

Cross-posts are only acceptable if the first one hasn't had any useful response after a few days.

Replies to the other one please, this one is closed.