Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread
Standard User superspeed
(regular) Thu 15-Nov-12 16:21:08
Print Post

Re: HUAWEI HG610 modem


[re: BatBoy] [link to this post]
 
Like VPI/VCI. I now have them after emailing my isp. smile
Standard User superspeed
(regular) Thu 15-Nov-12 16:26:02
Print Post

Re: HUAWEI HG610 modem


[re: BatBoy] [link to this post]
 
I have never used the 612 so was not sure if it would be the same UI.

BTW This is the IP for the user interface on this modem http://192.168.1.1 and the one that I did have trouble getting into.

Edited by superspeed (Thu 15-Nov-12 16:27:05)

Standard User superspeed
(regular) Thu 15-Nov-12 20:44:10
Print Post

Re: HUAWEI HG610 modem


[re: superspeed] [link to this post]
 
I am now posting this on the HG610 modem. smile My isp did not support all options on this modem, so had to try things out.

This is the part I am not sure about but the settings on there are what I am using now.
http://s6.postimage.org/sopem9sap/parts_not_sure_abo... Seem to work ok.

And here is my line stats from old router.
http://s6.postimage.org/hiqi7ksqp/other_router_stats...

And the HUAWEI HG610.
http://s6.postimage.org/5yq9ta935/HG610_modem_stats_...



No way can I get 14meg. I think my speed maybe a bit slower on the HG610. May need tweaking as some setting i'm unsure of. smile

Edited by superspeed (Thu 15-Nov-12 20:46:09)


Register (or login) on our website and you will not see this ad.

Standard User BatBoy
(legend) Thu 15-Nov-12 20:57:19
Print Post

Re: HUAWEI HG610 modem


[re: superspeed] [link to this post]
 
Does the Help work?
Service Type

It is used to configure the ATM Quality of Service(QoS). When the ATM QoS is set to CBR, rt-VBR or nrt-VBR, you should also configure the Peak rate, which specifies the upstream peak cell rate in cells per second. When the ATM QoS is set to rt-VBR or nrt-VBR, you should also configure the Support rate, which specifies the upstream sustainable cell rate, in cells per second, used for traffic shapping, and Maximum burst value, which specifies the upstream maximum burst size in cells.



_____________________________________________________________________________________________ this is not usenet __________________
Standard User superspeed
(member) Thu 15-Nov-12 21:20:48
Print Post

Re: HUAWEI HG610 modem


[re: BatBoy] [link to this post]
 
Yes just tried it but never taken any notice before. TBH that is a bit above my head as I have not had to do anything like that before.

Rest I have done, other than path0 path1. A bit silly but does affect your connection somehow.

Edited by superspeed (Thu 15-Nov-12 21:21:21)

Standard User broadstairs
(newbie) Fri 16-Nov-12 11:09:18
Print Post

Re: HUAWEI HG610 modem


[re: superspeed] [link to this post]
 
I am following this with interest as I have one of these as well and so far my using it has not been without problems. I am very interested in seeing how you get on and whether or not there are any issues with your HG610.

Stuart
Standard User Deadbeat
(knowledge is power) Wed 21-Nov-12 22:01:13
Print Post

Re: HUAWEI HG610 modem


[re: superspeed] [link to this post]
 
In reply to a post by superspeed:
...... My isp did not support all options on this modem........

Telling us which ISP you're with would help.
Standard User superspeed
(member) Wed 21-Nov-12 23:32:10
Print Post

Re: HUAWEI HG610 modem


[re: Deadbeat] [link to this post]
 
Doesn't really matter now as I may be moving to fiber in the next few months.

The modem works but if I get fibre, i'm sure most of the setting's will be used. As the HUAWEI HG610 is a VDSL modem, ADSL+2 is not likely to use all the features anyway.

Will see what it's like if/when I get fibre. smile

-----------------------------------------
Welcome to BT-Plusnet. wink

Edited by superspeed (Wed 21-Nov-12 23:35:47)

Standard User superspeed
(member) Tue 18-Dec-12 23:08:41
Print Post

Re: HUAWEI HG610 modem


[re: superspeed] [link to this post]
 
Anyone know how to get this modem working with PN fibre? I have entered my login isp details but won't connect. I don't even know what the right setting are or what settings I need to use.

As I said before, I got it working on my old isp but that was ADSL+2.

Thanks. smile

Edited by superspeed (Tue 18-Dec-12 23:21:50)

Standard User BatBoy
(legend) Tue 18-Dec-12 23:19:18
Print Post

Re: HUAWEI HG610 modem


[re: superspeed] [link to this post]
 
FTTC uses PTM not ATM. Do you want to set it up as a modem or a modem/router?


_____________________________________________________________________________________________ this is not usenet __________________
Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread

Jump to