Al1264 ive looked at your config and it seems different to DougM's but not sure which bits to add, also FBEditor can't seem to find my fritzbox ive tried the name and ip
Kev

I assume you've gone into: settings > Hostname/IP Address (mine's set to the default 192.168.178.1), also set the password: Settings > Password and set that then: File > Read Configuration?

In reply to a post by dA_MannY:

Al1264 you file loaded fine after a factory reset but still getting the prob with subscribed bt channels

Ditto. I'm going to take the FBEditor route when I've a bit more time to play around with things. Reason I want it working is because it's a handy unit for testing in the office as it has a build in packet capturing feature that avoids having to mess about with hubs etc.

Hi Al1264,

I just snagged a 7490 on Ebay and am trying to get my BT multicast channels working too. Could you share a copy of your 7490 config please ? Necessary personal details removed of course.

Thanks in advance.

I have tried applying the previous (earlier post) edits to no avail. FBEditor indicates the file restored to the FB successfully and indeed the FB log entry indicates so but it does not seem to have happened (Box does not reboot automatically and a re-read of the FB configuration into FBEditor just recovers the original unedited config)

Never mind, found the problem.
Seems the checksum was not being updated on the edited file when trying to restore.

Found a Perl script (below) that recalculated the new checksum for me, when I put this in the file, the edited file could be restored and now muticast works. I had rather presumed that FBEditor 0.7 would have done the checksum work for me.

BT IPTV (YouView) now confirmed working on 7490 with Fritz!OS 6.52.

link to checksum script

Edited by zippysticks (Fri 01-Jul-16 10:54:20)

Hey, 1st post - hello all 👍

I have a 7490, works very well, very happy with it indeed however, I did have BT TV Uhd installed on Saturday & have the same issue as some have described here.

Would anyone be willing to post / paste / pm a sanitised version of their script with some basic instructions so I can resume using my 7490 (running 6.52 I think) with BT TV please?

I'd be happy to donate to a / the worthy cause.

The BT HH5 is driving me nuts & I have lost consistent connectivity with devices which previously negotiated secure holes through the 7490's firewall.

Sincerely appreciated! Please help 😱

👍👍

Anyone?

Bueler.....?


Well on a serious note; if I can get it working I'll do my best for the next chap that comes along..

🙂

Will try and find the time to extract my config and post by the weekend.

Hi, sorry I missed your request, really glad you've got it solved. Hope this helps others too.