Technical Discussion
  >> DSL Hardware Discussion


Register (or login) on our website and you will not see this ad.


  Print Thread
Standard User epyon
(fountain of knowledge) Sat 04-Apr-20 10:26:57
Print Post

Setting up my TD-W9980 with FTTP - Not compatible?


[link to this post]
 
So i've been using this router for a long time on my ADSL/VDSL services but i can't seem to get it to work directly from my CPE with my current FTTP provider, I've found vlan setting for vdsl and the like but none for the wan interface, this would suggest it doesn't support vlan on the wan(ethppoe_1) could anyone confirm this or have a 2nd opinion.

Cheers

smile

Edited by epyon (Sat 04-Apr-20 11:57:57)

Administrator MrSaffron
(staff) Sat 04-Apr-20 12:42:26
Print Post

Re: Setting up my TD-W9980 with FTTP - Not compatible?


[re: epyon] [link to this post]
 
Not seen what the setup for Gigafast is, but had presumed it would be a simple DHCP process. Have you tried DHCP on the WAN interface connected to the supplied ONT.

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User epyon
(fountain of knowledge) Sat 04-Apr-20 13:36:29
Print Post

Re: Setting up my TD-W9980 with FTTP - Not compatible?


[re: MrSaffron] [link to this post]
 
Its an unmanaged box that gives me a single WAN connection

https://www.calix.com/content/calix/en/site-prod/lib...

http://i.epvpimg.com/yjtvcab.jpg

DHCP is on

i've seen on the vodafone forums they have a Vlan selection (911) for WAN connections

theses are my current settings so i don't see why i shouldn't get a connection unless i 100% need a vlan selection over EWAN

http://i.epvpimg.com/HbKNbab.png

Edited by epyon (Sat 04-Apr-20 13:45:15)


Register (or login) on our website and you will not see this ad.

  Print Thread

Jump to