General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User Adsl24
(knowledge is power) Wed 07-Mar-12 20:42:11
Print Post

Re: Fibre finally installed


[re: Stoo] [link to this post]
 
Yeah, I think it may be a limit on the Cisco port or something at the network centre as in reality the MLPPP bonding has never ever reached 100Mb before (bonding ADSL links) so it could be that the port is limited to 100Mb. We'll find out either way smile

James
ADSL24 Broadband
http://adsl24.co.uk
Standard User madnutter56
(newbie) Wed 07-Mar-12 21:15:37
Print Post

Re: Fibre finally installed


[re: Adsl24] [link to this post]
 
Is this what you are using?

CCS Power Router will bond to speeds of 100Mb/s


From here.
Standard User Adsl24
(knowledge is power) Wed 07-Mar-12 21:21:45
Print Post

Re: Fibre finally installed


[re: madnutter56] [link to this post]
 
On our side we're using a Linux PC 9acting as a router) with 4 Gigabit LAN cards.

So its no limitation on our side but could be on our suppliers side where the lines terminate at the LNS on the Cisco routers they use to enable the MLPPP bonding service.

I'll speak with their NOC tomorrow.

James
ADSL24 Broadband
http://adsl24.co.uk


Register (or login) on our website and you will not see this ad.

Standard User kasg
(experienced) Thu 08-Mar-12 10:23:57
Print Post

Re: Fibre finally installed


[re: Stoo] [link to this post]
 
In reply to a post by Stoo:
speedtest.net should handle near 1gbit/sec - although I guess it depends on which server you're testing against?

Indeed - I find that the "Trance FM" server in London, which is the one it wants to use for me by default, can't handle more than about 40-50Mbps, so I have to use a different one.

Kevin

plusnet Extra 80/20 trial
My Broadband Speed Test
Using OpenDNS
Standard User stonesy
(newbie) Tue 20-Mar-12 18:44:52
Print Post

Re: Fibre finally installed


[re: Adsl24] [link to this post]
 
James,

I have posted a ticket with ADSL 24, please could reply/explain what process of bonding you are using.

I am currently looking into buying a router of some form - Am I correct in saying that the Routerboard would not be sufficient if I were looking at 80/20 x2?

Is there a simpler solution than utilising a PC with Linux as you are, in order to get the desired throughput? Would a router like the cisco dual WANs be appropriate, or are these just for resillience/load balancing.

Cheers
Standard User stonesy
(newbie) Tue 20-Mar-12 19:59:49
Print Post

Re: Fibre finally installed


[re: stonesy] [link to this post]
 
Do ADSL24 support per packet bonding? And what are the pros of utilising MLPPP on your linux based PC/router over a dedicated device such as the firebrick 2700?
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to