HOw far does it need to be moved?
There are three of choices -
1. get a decent Cat5e (2pair)cable with RJ11 terminations and just use that to replace the existing cable; OR
2. if the run is long/complex/goes through walls/under floor then install an RJ11 or RJ45 socket next to the existing phone socket and one where the modem will be an connect Cat5e between those and a short patch lead at each end.
3. as with 2, but connect to the two IDC terminals on the rear of the VDSL faceplate and run it to a remote RJ11/RJ45 socket.
M H C
taurus excreta cerebrum vincit