General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread
Standard User WWWombat
(experienced) Sat 08-Dec-12 11:50:57
Print Post

Re: FTTx Components in Videos


[re: yarwell] [link to this post]
 
I think I agree - just a bit too heavy for serious use high up a pole.

Which leaves it to be used where there isn't space for a full cab. Or perhaps we'll see it in villages where there probably *is* space, but lower demand.
Standard User WWWombat
(experienced) Sat 08-Dec-12 11:55:14
Print Post

Re: FTTx Components in Videos


[re: Chrysalis] [link to this post]
 
Install of an end-user's FTTC connection doesn't require any work at the FTTC cab - it is just a job of re-jumpering within the PCP, with both the D-side and E-side being connected onto the tie cable.

Openreach don't (initially) fully provision the tie cables (and probably don't fully provision the shelves within the FTTC cab), so there are stops & starts in the availability checker as the various resources run out, and get fixed.
Standard User WWWombat
(experienced) Sat 08-Dec-12 11:56:08
Print Post

Re: FTTx Components in Videos


[re: Chrysalis] [link to this post]
 
That'll have been the feedback from the lawyers


Register (or login) on our website and you will not see this ad.

Standard User simon194
(committed) Sat 08-Dec-12 12:36:51
Print Post

Re: FTTx Components in Videos


[re: yarwell] [link to this post]
 
According the the ECI literature the fully assembled unit weighs 21kg.
Administrator MrSaffron
(staff) Sat 08-Dec-12 12:49:02
Print Post

Re: FTTx Components in Videos


[re: WWWombat] [link to this post]
 
Enquiry is under way

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User arfster
(knowledge is power) Sat 08-Dec-12 14:59:57
Print Post

Re: FTTx Components in Videos


[re: yarwell] [link to this post]
 
I think I saw something similar made for Asian apartment blocks a few years back - they run fibre to the basement then use internal building phone wiring for the rest.
Standard User Zarjaz
(knowledge is power) Sat 08-Dec-12 17:20:36
Print Post

Re: FTTx Components in Videos


[re: WWWombat] [link to this post]
 
Why, when pictured or filmed, working at a cabinet, is the engineer always shown wearing a helmet AND chinstrap ????

Standard User JimmyBoy
(committed) Sat 08-Dec-12 19:49:15
Print Post

Re: FTTx Components in Videos


[re: Adam3k] [link to this post]
 
In reply to a post by Adam3k:
Wish i had a nice blonde Openreach Engineer attend smile

shocked At the risk of being labelled a stalker, she also appears in the following CWU videos;

EH30

EH12

And the Kid who made the comment on this video is truly deserving of an ASBO (apologies...)! blush laugh
ballymunboy 1 month ago

Tasty bit of blond totty. She can squeeze my jelly crimps any day!
.

__________________________________________
O2 Pro Annex M - Sync'd @ ~17Mbps down/2.5Mbps up - STATIC!
Protected by IPCOP V1.4.21 and a ZyXEL Prestige 660R-D1 ADSL modem.

SOLAR - 0129 on a SKY DigiBox - As good now as they were on FM in the 1980s!

No longer living in fear of BTW's DLM - Destructive Line Mismangement!
Standard User ggremlin
(committed) Sat 08-Dec-12 20:52:31
Print Post

Re: FTTx Components in Videos


[re: MrSaffron] [link to this post]
 
perhaps these might be used 'underground' in conservation areas
Standard User Ignitionnet
(knowledge is power) Sun 09-Dec-12 15:09:49
Print Post

Re: FTTx Components in Videos


[re: Chrysalis] [link to this post]
 
In reply to a post by Chrysalis:
I wonder if VM do such videos and so open.


Nah, they supply themselves only. Openreach will be more open as they are trying to sell the FTTx solutions to service providers.
Pages in this thread: 1 | [2] | 3 | (show all)   Print Thread

Jump to