Forum Index | Search | Register (New User) | Login (Existing User) | Who's Online | FAQ | Main Site

General Discussion
  >> Fibre Broadband Previous thread View all threads Next thread


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | 4 | 5 | 6 | 7 | (show all)   Print Thread
Standard User asbokid
(member) Wed 01-May-13 15:21:49
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: bobbyboyuk] [link to this post] 		 
Hi Bobby,

Usually, it is the VLAN that needs to be configured (with VLAN ID 101)

See: http://www4.picturepush.com/photo/a/12826047/img/hg6...

Hopefully someone with a working VDSL2 link (we don't have VDSL2 here yet) could take some screenshots.

cheers, a
Standard User kasg
(fountain of knowledge) Wed 01-May-13 15:57:34
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: DrTeeth] [link to this post] 		 
I'm not sure I can stand the excitement/disappointment of being notified by email just now that an HG622 power supply had been listed!

Kevin

plusnet Unlimited Fibre - BQM
Using OpenDNS
Domains and web hosting with TSOHOST
Standard User StephenTodd
(committed) Wed 01-May-13 17:13:09
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: kasg] [link to this post] 		 
Received and working.

To help with configuration ....
I'm not saying this is correct or best; just it works.

1 - I restored default settings under Maintenance/Device
2 - Basic/DSL -> unticked AnnexM
3 - Basic/Link Interface/PTM -> set as in screenshot above http://www4.picturepush.com/photo/a/12826047/img/hg6... (thanks asbokid)
4 - Basic/Wan/WAN2_INTERNET_TR069_R_PTM2_4_1_1 . set [email protected] pass=bt, and favourite dns servers
5 - Basic/LAN set my preferred dns servers (194.73.82.242, 212.118.241.1)
6 - Basic/WLAN changed SSID and WPA pre-shared key

In 4, make sure to set values in the correct WAN connection.
The DNS servers here are the ones that will be used in 'nslookup xxx 192.168.1.1'

The dns servers in 5 are the ones that DHCP will instruct clients to use (so the ones in 4 will not generally be used as this skips the router as DNS server)

~~~
I'm seeing fractionally slower connection and fractionally higher interleave than with the HG612.
That may be because of all the modem disconnect/reconnect during getting the setip to work.

~~~
Bald_Eagle's stats collection not working right now with new modem.

~~~
Also, to use web interface from Chrome, I needed to add 192.168.1.1 to my adblock exceptions

--
Moved (with trepidation turned relief) to BT Infinity 2 for upload speed. Happy BE user for several years.

Edited by StephenTodd (Wed 01-May-13 17:36:09)


Register (or login) on our website and you will not see this ad.

Standard User kasg
(fountain of knowledge) Wed 01-May-13 17:20:06
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: bobbyboyuk] [link to this post] 		 
See also the reply that StephenTodd sent to me that was obviously meant for you.

Kevin

plusnet Unlimited Fibre - BQM
Using OpenDNS
Domains and web hosting with TSOHOST
Standard User StephenTodd
(committed) Wed 01-May-13 17:22:37
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: kasg] [link to this post] 		 
Sorry, yes. Maybe if you buy that power supply you can configure it as I describe, though ...???

--
Moved (with trepidation turned relief) to BT Infinity 2 for upload speed. Happy BE user for several years.
Standard User gaz31
(regular) Wed 01-May-13 18:21:51
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: StephenTodd] [link to this post] 		 
Thanks to you both i am now all set up using Plusnet fibre, was struggling with the
setup until i seen the above posts.
Standard User bobbyboyuk
(member) Wed 01-May-13 18:35:02
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: gaz31] [link to this post] 		 
same here, thanks Stephen & Asbo.

I can get my galaxy S3 connected via wireless fine, the wireless N adapter upstairs wont even see it, also the dell laptop next to the router saw the network, but wouldnt connect, was fine via a lan cable though.

Bit of a mixed bag, ok for a spare i suppose , and you never know if a firmware in the future will sort it out.
Standard User StephenTodd
(committed) Wed 01-May-13 18:45:56
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: bobbyboyuk] [link to this post] 		 
I gave it the same SSID and pass as the HomeHub had.
Almost all devices so far (2x laptop and iPad) just connected with no further change.
My son's android phone needed to be told to forget the network, and then reentered the (same) password and it worked.

--
Moved (with trepidation turned relief) to BT Infinity 2 for upload speed. Happy BE user for several years.
Standard User StephenTodd
(committed) Wed 01-May-13 19:24:38
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: StephenTodd] [link to this post] 		 
Bald_Eagle's stats collection not working right now with new modem.

Checked using the older scripts which are easier to see inside.
The reason seems to be that it fails to login using admin/admin: it sees the user admin, and then says password incorrect.
Not sure why.
My similar script that I run to get quick summary stats works on a similar principle and works ok.

Text
1
23
45
67
89
1011
1213
1415
1617
1819
2021
2223
2425
2627
2829
3031
3233
3435
3637
3839
4041
4243

Option explicit
Dim oShellset oShell = Wscript.CreateObject("WScript.Shell")
oShell.Run "telnet -f modem2.txt 192.168.1.1" 
WScript.Sleep 1500oShell.Sendkeys "admin~"
WScript.Sleep 100oShell.Sendkeys "admin~"
WScript.Sleep 100oShell.Sendkeys "sh~"
WScript.Sleep 10oShell.Sendkeys "xdslcmd info --show~"
WScript.Sleep 2000oShell.Sendkeys "exit~"
WScript.Sleep 10oShell.Sendkeys "exit~"
WScript.Sleep 10oShell.Sendkeys "~"
WScript.Sleep 10oShell.Sendkeys "~"
WScript.Sleep 10 
 oShell.Run "cmd.exe /c psping -n 25 -i 0 -q -w 5 bbc.co.uk >>modem2.txt",  0,  true
 Dim objFS
Dim objFileDim ts
Dim strLineset objFS = CreateObject("Scripting.FileSystemObject")
set objFile = objFS.GetFile("modem2.txt")set ts = objFile.OpenAsTextStream(1,-2)
Do Until ts.AtEndOfStream    strLine = ts.ReadLine
        if InStr(strLine,"Down") > 0 then Wscript.echo strLine        if InStr(strLine,"SNR") > 0 then Wscript.echo strLine
        if InStr(strLine,"D:") = 1 then Wscript.echo strLine + "               (interleave)"        if InStr(strLine,"delay:") = 1 then Wscript.echo strLine + "               (interleave)"
        if InStr(strLine,"Sent =") > 0 then Wscript.echo "ping bbc ..." : Wscript.echo strLine        if InStr(strLine,"Minimum =") > 0 then Wscript.echo strLine
Loopts.Close


--
Moved (with trepidation turned relief) to BT Infinity 2 for upload speed. Happy BE user for several years.
Standard User RobertoS
(sensei) Wed 01-May-13 23:14:47
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: StephenTodd] [link to this post] 		 
May be a timing issue with the Bald_Eagle exe version supplying the password before it is requested. Does his scripted version work, like yours?

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 54.2/15.2Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Pages in this thread: 1 | 2 | [3] | 4 | 5 | 6 | 7 | (show all)   Print Thread

Previous thread View all threads Next thread
Jump to