General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | [7] | (show all)   Print Thread
Standard User RobertoS
(sensei) Tue 28-May-13 12:01:08
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: Bald_Eagle1] [link to this post]
 
Thanks smile. I'll give you a shout another day. Today isn't a good time for playing around.

My broadband basic info/help site - www.robertos.me.uk | Domains,website and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync ~ 54.2/15.2Mbps @ 600m. - BQM

"Where talent is a dwarf, self-esteem is a giant." - Jean-Antoine Petit-Senn.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Allergy information: This post was manufactured in an environment where nuts are present. It may include traces of understatement, litotes and humour.
Standard User asbokid
(member) Thu 30-May-13 16:18:41
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: RobertoS] [link to this post]
 
In reply to a post by RobertoS:
DMZ - pass! (I assume others have pings/BQM working, maybe that's how, but not something I have ever touched).

Maybe a specific iptables rule to allow inbound ICMP packets?
Connection trigger - I did wonder about that and the same thought occurred about the sync. Maybe I'll give it a try in a couple of days.

Just checked and Connection Trigger set to manual, allows the ppp layer to be brought up and down without affecting the DSL layer.

cheers, a

edit: typo thursday!

Edited by asbokid (Thu 30-May-13 16:23:47)

Standard User StephenTodd
(experienced) Tue 11-Jun-13 21:52:06
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: asbokid] [link to this post]
 
I commented earlier about my issues using HG622 as both VDSL2 modem and router;
basically my RSCorr rate shoots up from around 10 per second average to 1000's per second.
If left connected, that naturally causes DLM to lower my profile (from around 70Mbps to around 54Mbps over 9 days while I was away)
Apart from that, it works fine.

asbokid has been extremely helpful in trying to sort this out: he has taken my first modem back, tested it against his rig (all clean), tested another HG622 (all clean) and sent it to me. Alas, the result for me was almost exactly the same with the second HG622. I didn't leave it connected for so long this time.

So a couple of questions before I send the second one back and claim the refund which asbokid has been very happy to offer.
1) Has anyone managed to get the HG622 running effectively as a combined VDSL2 modem/router?
2) Can anyone think of any configuration error I may have made that would get it working but cause these low level DSL errors? (asbokid and I can't).
3) Can anyone think of any other explanation for what I have seen?

Neither of us can think of why this might be happening

--
Moved (with trepidation turned relief) to BT Infinity 2 for upload speed. Happy BE user for several years.


Register (or login) on our website and you will not see this ad.

Standard User BatBoy
(legend) Tue 11-Jun-13 21:56:24
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: StephenTodd] [link to this post]
 
Is bitswapping on?


__________________________________________________________________________The back pedalling starts here__________________
Standard User StephenTodd
(experienced) Tue 11-Jun-13 21:57:50
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: BatBoy] [link to this post]
 
Yes, bitswapping was on. Do you think it should be on or off?

--
Moved (with trepidation turned relief) to BT Infinity 2 for upload speed. Happy BE user for several years.
Standard User BatBoy
(legend) Tue 11-Jun-13 22:04:33
Print Post

Re: Huawei HG622 VDSL2 FTTC modem router on Ebay, 7 Left


[re: StephenTodd] [link to this post]
 
I think it should be on definitely.


__________________________________________________________________________The back pedalling starts here__________________
Pages in this thread: 1 | 2 | 3 | 4 | 5 | 6 | [7] | (show all)   Print Thread

Jump to