General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | 3 | 4 | (show all)   Print Thread
Standard User nicomorr
(newbie) Wed 10-Jul-13 19:34:25
Print Post

Re: New FTTC install - what should I expect?


[re: Ignitionnet] [link to this post]
 
Yes I am using XP Pro SP3

Nico Morrison
London UK
Manali India
http://radio.theflowerraj.org
http://theflowerraj.org
Standard User nicomorr
(newbie) Wed 10-Jul-13 19:39:27
Print Post

Re: New FTTC install - what should I expect?


[re: nicomorr] [link to this post]
 
"2013-7-10 19:8:40 User Notice upnp 1 tr064 set action(QueryStateVariable) failed !"

From the router logs, what does it mean?

Nico Morrison
London UK
Manali India
http://radio.theflowerraj.org
http://theflowerraj.org
Standard User MHC
(sensei) Wed 10-Jul-13 19:44:28
Print Post

Re: New FTTC install - what should I expect?


[re: nicomorr] [link to this post]
 
Certainly the WAN one should be 1492 and the routing one - try 1492 or maybe less.

You might need to experiment.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit


Register (or login) on our website and you will not see this ad.

Standard User nicomorr
(newbie) Wed 10-Jul-13 19:55:07
Print Post

Re: New FTTC install - OK, wait ^ C!


[re: MHC] [link to this post]
 
MTU set at 1492, maybe a smidgeon better, I'm going to wait a couple of days & see what happens. 55/16 is nae bad Jimmie!

Nico Morrison
London UK
Manali India
http://radio.theflowerraj.org
http://theflowerraj.org
Standard User MHC
(sensei) Wed 10-Jul-13 20:06:59
Print Post

Re: New FTTC install - OK, wait ^ C!


[re: nicomorr] [link to this post]
 
What if you go straight into teh HG533 router and not via the switch?


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

M H C


taurus excreta cerebrum vincit
Standard User R0NSKI
(fountain of knowledge) Wed 10-Jul-13 20:24:26
Print Post

Re: New FTTC install - what should I expect?


[re: nicomorr] [link to this post]
 
In reply to a post by nicomorr:
What do you think?
You need some new PC's, quad core with an SSD, then you'll feel the speed of a modern setup wink

Well, someone had to say it wink

Standard User Ignitionnet
(knowledge is power) Wed 10-Jul-13 20:36:20
Print Post

Re: New FTTC install - what should I expect?


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
Not sure its RWIN as would see a ramp for the single thread, What is odd is the performance of the multiple threads, what CPU is this machine?

On the wireless, if you only have b/g devices try turning off the n mode on the router.

Andrew


No window scaling; RWIN only has enough room in the header, 16 bits, to go up to 65535. How exactly is it to ramp?

Edited by Ignitionnet (Wed 10-Jul-13 20:40:15)

Standard User Ignitionnet
(knowledge is power) Wed 10-Jul-13 20:39:04
Print Post

Sheesh You Guys....


[re: nicomorr] [link to this post]
 
OP - use this - http://www.speedguide.net/downloads.php

Set the bandwidth and run with optimal settings, should fix it right up.
Standard User nicomorr
(newbie) Wed 10-Jul-13 21:37:38
Print Post

Re: Sheesh You Guys.... SORTED!!!!!


[re: Ignitionnet] [link to this post]
 
@Ignitionnet you pointed me in the right direction. Thank you so much!

I ran SG TCP Optimizer & now get 75down/17up!

I simply as you suggested, set the bandwidth & then did 'optimal' on both General & Advanced settings.

http://www.thinkbroadband.com/speedtest/results.html...

Happy bunny here, now to see if it does the laptop the same...

PS: T41 laptop slower on x6 download but otherwise the same 75/17:
http://www.thinkbroadband.com/speedtest/results.html...

Nico Morrison
London UK
Manali India
http://radio.theflowerraj.org
http://theflowerraj.org

Edited by nicomorr (Wed 10-Jul-13 21:52:33)

Standard User Ignitionnet
(knowledge is power) Wed 10-Jul-13 22:06:09
Print Post

Re: Sheesh You Guys.... SORTED!!!!!


[re: nicomorr] [link to this post]
 
Good man. You're welcome.
Pages in this thread: 1 | [2] | 3 | 4 | (show all)   Print Thread

Jump to