FritzBox 3370 does it work on FTTC?

and if so what setting would I need? Its a BTW FTTC connection.

Edited by deleted (Fri 19-Sep-14 15:31:22)

I think it should work. Make sure you have the latest firmware, and manually set the VLAN ID to 101 (I think).

Cheers,
AP

http://en.avm.de/products/fritzbox/fritzbox-3370/tec...

It looks like it should do just fine.
 

Bit more info; to set the VLAN ID:

Click the "Internet" menu on the left, which expands, then click "Account Information".

On the right, scroll down and click "Change Connection Settings" to expand this section.

Tick "Use VLAN for internet access", and enter 101 as the VLAN.

Click apply, whilst keeping your fingers and toes crossed.

If it works, mine's a pint

Do I plug directly into the Fritz or still via the openreach modem?

Ive set the Vlan 101 Ill be taking it to the users home tomorrow to test it out.

There should be a 'Y-Cable' to plug directly to the FritzBox. The other 2 ends to the faceplate or splitter.

There used to be a bug (IIRC) in FritzOS where you had to enter values for VCI/VPI even though these are not used for VDSL.

Simon.

So no need for the Openreach white modem?

Just plug the RJ11 (or RJ45) cable from the faceplate directly into the Fritzbox's VDSL port. It contains a VDSL modem, and doesn't need the Openreach modem in the middle.

Alternatively, if for some reason you want to us the Openreach modem, plug the cable out from that into the WAN port on the Fritzbox.

I have the 3390, so I guess it's very similar.

Thanks very much!

In reply to a post by AndyPandy:

Just plug the RJ11 (or RJ45) cable from the faceplate directly into the Fritzbox's VDSL port.

Yes, sorry ignore my post about the Y-Cable - was thinking about the 7390..

Simon.