Asus DSL-AC68U Fibre settings (Plusnet)

Does anyone have this router or a similar Asus model who has Plusnet Fibre? I'd be very grateful if someone is able to let me know that settings I need to get online.

Many thanks.

VLAN 101

If your not aware all ready there's a number of people experiencing issues with the modem side of this router with instability.

Hi i am using this router on plusnet fibre. i had loads of stability issues to start with but since firmware version 1.0.1.9 it has bee stable for days. I am 1800 meters from cabinet and sync rate is a steady 17500mb/s. Very happy with this router now, thought i would have to return it Settings are

VDSL2
ANNEX B/J
STABILITY ADJUSTMENT (VDSL) 7db
TX POWER CONTROL (VDSL) -2db
Rx AGC GAIN Adjustment (VDSL) STABLE
UPBO - upstream power back off (VDSL) AUTO
SRA (Seamless Rate Adaptation) ENABLED
Bitswap (VDSL) ENABLED
VDSL Profile 30A MULTIMODE
G.INP (G.998.4) ENABLED
G.vector (G.993.5) ENABLED
VLAN ID 101 IN WAN SETTINGS

Hope this helps. Stew

Edited by deleted (Tue 09-Dec-14 21:38:25)

Openreach FTTC is VDSL Profile 17a, with no likelihood of 30a in the lifetime of your router. I assume the Multimode means it is able to train down though.

Auto detect automatically sets it to 30a so just left it at that. Irrelevant really as its working purfectly. stability adjust and tx power are the settings that really make difference. This modem seems to sync @ 3mb/s quicker than open reach modem.