Please : Can someone look at these Results Good Or Bad

Downstream Upstream
Data Rate (kbps) 23385 1235
Noise Margin (dB) 2.5 5.6
Noise Margin (dB) 3.0 6.7
Attenuation (dB) 10.4 4.1
Output power(dbm) 19.9 12.2

Noise Margin goes from 2.5 - 3.0 & 5.6 - 6.7 is this normal ?

thanks
David

Edited by deleted (Sun 01-Mar-15 19:52:02)

Yes. When you live that close to the exchange and have a clean line.

Fibre broadband?

Adsl 2+ no fibre yet
Had a few drop out a month or so a go and i am only 140 metes from the exchange, was on a external wired extension but switched to shorter internal extension .Then found out it may have been a CPR phone blocker causing the problem.
Purchased a BT 8500 with phone blocker build in and line seems more staple now so have now Switched back to the External Wiring hopefully it will work with fibre when installed in the next month or so.

Thanks again

David

Edited by deleted (Mon 02-Mar-15 00:32:26)

Not the right forum then

Sorry

Edited by deleted (Sun 01-Mar-15 22:41:54)

I didn't realise he was in the wrong forum but those looked very much like ADSL2+ stats. Particularly the attenuations and downstream power fitted the sync.

It's ADSL2+ as well, not ADSL +2 .