Fritzbox 7390 help

Hi
could anyone possible help I have fritz box 7390 international version
running FRITZ!OS 06.20-29491 BETA I currently have it setup on BT Infinity 2
my problem is I am unable to get my full upload speed my download speed is correct .
any help or advice would be appreciated

regards ste

I'd try the non-beta firmware 06.20 http://en.avm.de/service/downloads/download/show/18847/

If you can't directly get that on the F!B from the beta there's a recovery image here: ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7390/x_...

I'm running 06.20 with absolutely no problems (I get exactly 20000 upload sync and around 18Mb/s on TBB speedtest)(

cheers mate niceone will give that a go

update
ok tried that mate still no joy

apologizes for the double post

Edited by deleted (Thu 09-Apr-15 17:04:14)

Do you have a BT modem or suitable HomeHub to try as an alternative (to rule out a line/cabinet/exchange issue?
What are your DSL stats looking like (usually http://192.168.178.1/internet/dsl_stats_tab.lua?sid=65e257cd73a3fc1e& )?

I did try the openreach modem back online was getting my speed back again . have tried to edit the settings file but when I try to upload it I get this message

The specified file is not a valid import file.

just a thought could you forward a copy of you settings file would that work ?

here are my stats


Receive Direction Send Direction
Max. DSLAM throughput kbit/s 74000 20000
Min. DSLAM throughput kbit/s 128 128
Attainable data rate kbit/s 69604 5173
Current throughput kbit/s 69328 5144
Seamless rate adaptation off off

Latency 8 ms 8 ms
Impulse Noise Protection 3 2.6
G.INP off off

Signal-to-noise ratio dB 6 6
Bitswap on off
Line attenuation dB 13 8

Profile 17a
G.Vector off off

Carrier record A43 A43

Edited by deleted (Thu 09-Apr-15 17:35:55)

Something not too good there, your US attenuation is low (usually a good thing) but attainable and actual rates are dreadful (particularly for your DS rate).

Is this with the 'normal' 06.20 firmware?

My stats for comparison:
Negotiated Connection Properties
Receive Direction Send Direction
Max. DSLAM throughput kbit/s 80000 20000
Min. DSLAM throughput kbit/s 128 0
Attainable data rate kbit/s 65660 25453
Current throughput kbit/s 66416 20000
Seamless rate adaptation off off
Latency fast fast
Impulse Noise Protection 49.1 44.9
G.INP on on
Signal-to-noise ratio dB 7 9
Bitswap on on
Line attenuation dB 13 14
Profile 17a
G.Vector off off
Carrier record A43 A43

Note I have G.INP recently activated from my (Huawei) cabinet so Impulse Noise Protection figures look particularly odd.

Not sure if 'Bitswap off' on your upstream is indicating something here, mine's always been on.

yes mate had to use the recovery file of the link you posted
FRITZ!OS 06.20
ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7390/x_...
thanks for your time by the way appreciated

Edited by deleted (Thu 09-Apr-15 17:45:55)

You should have

Bitswap on on

as Al1264 has shown.

Is there a option to enable that?