N66U on Infinity 2. 200kbps up stream

Hi all,

I have been trying to fathom why my Asus N66U router will not sync at similar speeds as the HH5.

Here are screen shots of my settings and stats: One time the N66U synced at 17mbps up, way higher than the 9mbps~ I get on HH5. So I believe it is capable of good things, I simply don't know what I am doing wrong. This is with BT Infinity 2.

Asus dsl-n66u DSL Log-

http://s1175.photobucket.com/user/dizzibits/media/Ca...

WAN settings -

http://i1175.photobucket.com/albums/r633/dizzibits/C...

DSL Setting

http://i1175.photobucket.com/albums/r633/dizzibits/C...

HomeHub5 stats

http://i1175.photobucket.com/albums/r633/dizzibits/C...

Many thanks for help

Edited by deleted (Sun 31-May-15 19:12:10)

It should be Annex B.
I'm not sure about the VDSL stability and Tx Power Control being disabled, but maybe that's fine.
SRA isn't implemented by Openreach so I would disable it.
VDSL mode in use by Openreach is 17A.
If you are on a Huawei cabinet you should enable G.INP.

Change the firmware to 'Merlin' far superior to the Asus's firmware.

http://asuswrt.lostrealm.ca/download

By the way, your first two links are the same and we don't see any stats.

In reply to a post by RobertoS:

By the way, your first two links are the same and we don't see any stats.

Here you go

http://i1175.photobucket.com/albums/r633/dizzibits/C...

Thank you for the responses so far. I shall try those items mentioned, I am uncertain of what they actually "do"!

Based on the advice given I have played with the settings a lot. I can says these things:

ANNEX B does not appear to work, the DSL light doesn't flash at all. Even after waiting for quite some minutes.

The DSLAM does not support G.INP (G.988.4), the DSL light just keeps flashing, but does not sync.

I could not flash Merlin onto my router. I tried resetting NVRAM, using the recovery tools. The new firmware must have disabled customised bios. I have the latest version from Asus.

Since I first synced with the cab, my line stats have changed dramatically. I went from Pathmode: Fastpath with reasonably high CRC errors occuring. 46,000 down rate with a 50,000 maximum, and 20,000 up rate with a /22,000 maximum.

I am now on interleaved path mode, with the following settings and stats:

Settings

http://i1175.photobucket.com/albums/r633/dizzibits/C...

Stats
http://i1175.photobucket.com/albums/r633/dizzibits/C...

Please could someone who knows more about this stuff advise me. Will my download improve? I believe I have an impacted line, Openreach have tried their darnedest to help. One engineer spent 6 hours working on the line on a Sunday and really cleaned it up.

Many thanks

dizzi

Edited by deleted (Tue 02-Jun-15 13:56:23)