|
|
Does anybody have a link to the correct firmware needs for unlocking a HG612?
Ive read that to be compatible with the g.imp thing the firmware version has to end in a xxxxx08, however I can only find one ending in xxxxx10 on the Kitz website.
Freeserve Dial-Up --> BTopenworld --> <n>ildram -->Talk Talk LLU --> ZeN
ASUS RT-AC66U
|
|
|
Check this post.
http://forums.thinkbroadband.com/fibre/t/4399245-re-...
Its not the 10 or 08 you need to be looking at but 10 is the right one that you need
TalkTalk 80Mb
Current Line Stats
Attainable Rate: DL: 91480 UL: 32294
Connection Speed: DL: 79999 Kbps UL: 20000 Kbps
SNR: DL: 14.9 UL: 14.2
Attenuation: DL: 13.3 UL: 6.4
Edited by Seansmit17 (Wed 24-Jun-15 09:41:38)
|
|
|
Noooooo Sean.
Not easy for me to find the right one, using an iPad in bed, but the 10 is base 28 and doesn't support G.INP. The 08 is base 30 and does. Read the full version numbers.
The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync 58162/14182kbps @ 600m. - IPv4 BQM IPv6 BQM
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
I'll find it for you later, unless hopefully someone else does in the meantime.
The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync 58162/14182kbps @ 600m. - IPv4 BQM IPv6 BQM
|
|
|
Read the whole of the thread that is linked to by seansmit ... and as robertos says ...030SP08
Go to: https://mega.co.nz/#F!LdJFDIJL!e_E1twsIg2kTet8mPjrb4w
and you will see a list of three folders, select the B030SP08 folder and within that are three files original, unlocked, webgui - I used the third one and have access via Telnet and the Webgui.
I also set the IP address under Basic; LAN; to be a specific value say 192.168.1.234
Connect LAN2 to your router or switch and you can then access at will, knowing the IP address.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
M H C
taurus excreta cerebrum vincit
Edited by MHC (Wed 24-Jun-15 10:18:29)
|
|
|
SP08 is the correct one yes!
WBC 4400/800 @ 4.2Km > TP-Link TD-W8968v3
FTTC 66000/19999 @ 450m > HG612 > Asus RT-AC87U BQM
|
|
|
|
|
|
|
snap - editing my post when you posted this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
M H C
taurus excreta cerebrum vincit
|
|
|
My bad I did mean to say 08 but after a night at work my brain don't work so well 
TalkTalk 80Mb
Current Line Stats
Attainable Rate: DL: 91480 UL: 32294
Connection Speed: DL: 79999 Kbps UL: 20000 Kbps
SNR: DL: 14.9 UL: 14.2
Attenuation: DL: 13.3 UL: 6.4
|
|
|
Thanks all
I got the unlocked firmware and I have followed the process to flash it to the modem.
Problem is now after uploading the new firmware to the device after a while I just get 'page cannot be display'.I can still ping the modem.
Almost seems as if it is not unlocking?
Freeserve Dial-Up --> BTopenworld --> <n>ildram -->Talk Talk LLU --> ZeN
ASUS RT-AC66U
|
|
|
Just solved my own problem. Rather than using the firmware labelled 'unlocked' you have to use the one labelled WEBGUI
Freeserve Dial-Up --> BTopenworld --> <n>ildram -->Talk Talk LLU --> ZeN
ASUS RT-AC66U
|
|
|
There are two ways of accessing the modem. Telnet, which I normally use, and the GUI. Both the one you used first and the GUI one have telnet access, but I can't see the point of the non-GUI version.
You get a lot more information through telnet. There are also two real-time monitoring packages you can run that telnet into it at one-minute intervals and use that full information to produce a number of graphs and a CSV log file.
Corrected as per burakkucat's post.
The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync 58162/14182kbps @ 600m. - BQM
Edited by RobertoS (Thu 25-Jun-15 14:26:09)
|
|
|
Just solved my own problem. Rather than using the firmware labelled 'unlocked' you have to use the one labelled WEBGUI
which one did I suggest?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
M H C
taurus excreta cerebrum vincit
|
|
|
Thanks MHC, I got too bogged down in it and overlooked you had provided the exact detail.
Thanks again
Freeserve Dial-Up --> BTopenworld --> <n>ildram -->Talk Talk LLU --> ZeN
ASUS RT-AC66U
|
|
|
There are also two real-time monitoring packages you can run that telnet into it at one-second intervals . . . <cough> (Pesky fur-ball.) I believe you meant to type "at one-minute intervals".
100% Linux and, previously, Unix.
|
|
|
That's what it says .......................................................................................................................................now!
Thanks  .
One could say that a second is minute .... 
The indispensable man or woman passes from the scene, and what happens next is more or less the same thing as was happening before.
My broadband basic info/help site - www.robertos.me.uk. Domains, site and mail hosting - Tsohost.
Connection - Plusnet UnLim Fibre (FTTC). Sync 58162/14182kbps @ 600m. - BQM
|
|
|
Purrfect!
100% Linux and, previously, Unix.
|
Pages in this thread: 
Print Thread
Ripley
