HH5A stats monitor

I have just replaced my HG612 with an HH5A (about to move from Plusnet back to BT). Connection stats look almost identical.

I have been using the excellent HG612 Modem Stats program for about 3 years.
Is there a recommended equivalent program for HH5A?

I have just downloaded RouterStatsHub from http://www.vwlowen.co.uk/RouterStatsHub/download.htm which seems to be doing what I need, but wondered if there were any other recommendations.

Any reason you didn't just keep the HG612 ?

The one box solution is neater and uses less power.

At the moment the HH5 appears to be giving me just as good sync as the HG612. In a few days I'll be moving for 40/20 to 40/10, and with my reasonably good line that means the modem is very unlikely to be critical.

Fair point..
I moved the other way so I could put my router under the stairs etc to integrate with network I have.
Sorry I can't help you with the stats on the HH though.

In reply to a post by StephenTodd:

The one box solution is neater and uses less power.

At the moment the HH5 appears to be giving me just as good sync as the HG612. In a few days I'll be moving for 40/20 to 40/10, and with my reasonably good line that means the modem is very unlikely to be critical.

isn't the HH5 ver A a similar chipset based device to the ECI modem? ( not broadcom)

Edited by tommy45 (Thu 06-Aug-15 22:08:53)

In reply to a post by tommy45:

isn't the HH5 ver A a similar chipset based device to the ECI modem? ( not broadcom)

I believe so, therefore G.INP won't be activated.

HH5a is G.INP capable but only on the downstream...

No it's not

Erm, not sure what to say because it is! and so is the ECI modem!

The HH5a got a firmware update that made it fully capable, I'm not sure about ECI modem!

Why do you think Openreach removed G.INP for upstream for but left it on downstream.

In reply to a post by mlmclaren:

Erm, not sure what to say because it is! and so is the ECI modem!

The HH5a got a firmware update that made it fully capable, I'm not sure about ECI modem!

Why do you think Openreach removed G.INP for upstream for but left it on downstream.

Do you have a HH5A connected to a Huawei cabinet? Because I do.