Are my line stats ok?

Hi all Are my line stats ok getting loads of errors from HG612
Even just after a reboot i am getting FEC errors

Also can anyone tel me why when using the HG612 i am not on fastpath
when using my ee bright box 2 i am on fast path

Stats from DSLSTATS

Stats recorded 12 Oct 2015 18:23:04

DSLAM/MSAN type: IFTN:0xb204 / v0xb204
Modem/router firmware: AnnexA version - A2pv6C038m.d24j
DSL mode: VDSL2 Profile 17a
Status: Showtime
Uptime: 1 hours 41 min 51 sec
Resyncs: 0 (since 12 Oct 2015 17:14:53)

Downstream Upstream
Line attenuation (dB): 17.7 0.0
Signal attenuation (dB): Not monitored
Connection speed (kbps): 72696 20000
SNR margin (dB): 6.8 9.3
Power (dBm): 13.3 6.3
Interleave depth: 1423 1
INP: 3.00 0
G.INP: Not enabled

RSCorr/RS (%): 0.0030 0.1466
RSUnCorr/RS (%): 0.0002 0.0000
ES/hour: 2.37 2.37

Edited by deleted (Mon 12-Oct-15 18:30:29)

Fulll Telnet Data

xdslcmd info --stats
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 25679 Kbps, Downstream rate = 83908 Kbps
Bearer: 0, Upstream rate = 20000 Kbps, Downstream rate = 72696 Kbps

Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.8 9.3
Attn(dB): 17.7 0.0
Pwr(dBm): 13.3 6.3
VDSL2 framing
Bearer 0
MSGc: 18 150
B: 51 236
M: 1 1
T: 64 5
R: 12 16
S: 0.0228 0.3771
L: 22496 5410
D: 1423 1
I: 64 255
N: 64 255
Counters
Bearer 0
OHF: 4220045 1007564
OHFErr: 17 16
RS: 1080158138 1034840
RSCorr: 31638 583
RSUnCorr: 1652 0

Bearer 0
HEC: 515 0
OCD: 8 0
LCD: 8 0
Total Cells: 862568158 0
Data Cells: 3441763 0
Drop Cells: 0
Bit Errors: 0 0

ES: 4 4
SES: 0 0
UAS: 24 24
AS: 6172

Bearer 0
INP: 3.00 0.00
INPRein: 0.00 0.00
delay: 8 0
PER: 1.46 6.15
OR: 131.29 202.87
AgR: 72827.51 20203.27

Bitswap: 4423/4423 6/6

Total time = 1 hours 43 min 16 sec
FEC: 31638 583
CRC: 17 16
ES: 4 4
SES: 0 0
UAS: 24 24
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 15 minutes time = 13 min 16 sec
FEC: 4744 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 15 minutes time = 15 min 0 sec
FEC: 11505 25
CRC: 1 3
ES: 1 3
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Latest 1 day time = 1 hours 43 min 16 sec
FEC: 31638 583
CRC: 17 16
ES: 4 4
SES: 0 0
UAS: 24 24
LOS: 0 0
LOF: 0 0
LOM: 0 0
Previous 1 day time = 0 sec
FEC: 0 0
CRC: 0 0
ES: 0 0
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Since Link time = 1 hours 42 min 51 sec
FEC: 31638 583
CRC: 17 16
ES: 4 4
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
#

What stats does a BrightBox 2 give? Does it mention G.INP?

last stats from bb2

DSL STATUS

This page shows information about your DSL connection. If you are using Ethernet Broadband then this page is not applicable.

STATUS
Configured Current
Line Status -- UP
Link Type -- Fast Path
Operation Mode Automatic G.993.2 (VDSL2)
DATA RATE INFORMATION
Upstream 20000 (Kbps)
Downstream 73162 (Kbps)
DEFECT/FAILURE INDICATION
Operation Data Upstream Downstream
Noise Margin 9.4 (dB) 6.6 (dB)
Line Attenuation 0.0 (dB) 17.7 (dB)

Indicator Name Near End Indicator Far End Indicator
Output Power 6.8 (dBm) 13.2 (dBm)
Fast Path FEC Correction 20 0
Interleaved Path FEC Correction -- --
Fast Path CRC Error 0 0
Interleaved Path CRC Error -- --
Loss Of Signal Defect 0 0
Fast Path HEC Error STR 0 0
Interleaved Path HEC Error -- --
Error Seconds 0 0
STATISTICS
Received Data 6578 (Kbits)
Transmitted Data 1326 (Kbits)

the above are from around 5 min connection

Hmmm. No obvious clue there that I can see.

The BrightBox 2 GUI stats is clueless it always shows fastpath on both upstream and downstream even if your downstream is interleaved.

And the BrightBox2 GUI has no way of telling you if your line is G.INP enabled or not it's a good ISP modem/router BCM63168 it's only let down by locked information and no telnet access.

There won't be any G.INP as it's an ECI cabinet.

In reply to a post by BatBoy:

There won't be any G.INP as it's an ECI cabinet.

does not matter either way ECI or Huawei cabinet the BB2 is not able to show G.INP stats but it is a G.INP capable modem.