BT Wholesale broadband datasets dated 5th May 2016 error???

Erm, every postcode that has FTTP that I enter in on codelook all say its FTTC and FTTP, April's version was fine.

Can anyone else that has FTTP check their post code on that site to see if it also says FTTC as well as FTTP for their postcode.

I have checks loads that I have already stored in my own database that I know have FTTP and they also say its FTTC as well as FTTP.

I also spoke to Executive Level Complaints, BT Consumer today on the phone and she was told on their system that our FTTP was all live but for some reason they couldn't order FTTP, and they checked with the openreach system (might be via the portal) and she was presented with FTTP is live but you cannot order due to FTTC is due to be installed between 2016 to 2017.

Like cabinet 39 on exchange Ilford Central (LNILC) says the following:

Cabinet P39   FTTC Available from 30th December 2011      FTTP from 30th December 2011      Huawei   E12 5AZ

And I am 100% that is FTTP due to I know several homes that have the external Grey, Brown etc fibre box and have Infinity 4.

Like I have said I have tried loads of different areas that I know have FTTP and they all get listed as both.

It just looks screwy

Paul

I just checked an address I know has FTTP and it showed FTTP only, no FTTC.

Edit: ah, sorry, that was using the BT Wholesale ADSL Checker, not "codelook" - what's the address for that?

Edited by kasg (Thu 12-May-16 21:00:30)

In reply to a post by kasg:

I just checked an address I know has FTTP and it showed FTTP only, no FTTC.

Really?
What postcode would that be if you don't mind me asking?

I tried about 30 different postcode all over the UK and they all showed them as both when you viewed them in the full cabinet list.

Paul

In reply to a post by PaulKirby:

What postcode would that be if you don't mind me asking?

CO6 5BB - also see the edit to my post.

In reply to a post by kasg:

In reply to a post by PaulKirby:

What postcode would that be if you don't mind me asking?

CO6 5BB - also see the edit to my post.

Yep broken for that postcode as well

Cabinet P1   FTTC Available from 7th July 2015      FTTP from 7th July 2015      Huawei   CO10 5HS

http://www.telecom-tariffs.co.uk/codelook.htm

Code look is using May's update April's didn't have this issue.

And this seems to be confusing the hell out of them (Executive Level Complaints, BT Consumer) and their manger.
Like in one hand it says our FTTP is all live and the other it telling them that FTTC will be ready between 2016 and 2017 LOL.

Paul

Edited by PaulKirby (Thu 12-May-16 21:13:58)

Take a look at PO21 5AZ. That postcode has no FTTC but has had FTTP for over a year (in fact the whole estate is FTTP). Shows in codelook as "FTTC Planned".

Same issue here, all postcodes that are just about to go live with FTTP (infrastructure all up and everything) are now showing as FTTC. Also where FTTP is LIVE, it says this for example:
Cabinet E_5 - FTTC Available from 10th October 2015 - FTTP from 10th October 2015

Something doesn't seem quite right.

I've checked a few local exchanges and every single cabinet that isn't enabled (even the exchange only bundles), now shows "FTTC Planned" even though the Openreach site still has the cabinets at "exploring solutions".

I doubt every single cabinet on the Benton, Wallsend, North Shields and Killingworth exchanges are planned for FTTC.

How do you know this is not a codelook generated issue i.e. ingested data wrongly

Might just be the way codelook has done the new dataset, as my area is certainly not FTTC (as there is no new cabinet anywhere near the existing cabinet) and has just gone live in the last month or so for FTTP orders.