Ok, like you already now know its FTTPod shown below:
Address ###################### on Exchange ABERDEEN CULTER is served by Cabinet 6
--------------+-------------------+---------------+--------------+--------------------
Featured Downstream Line Upstream Line Downstream WBC FTTP
Products Rate(Mbps) Rate(Mbps) Range(Mbps) Availability Date
--------------+-------------------+---------------+--------------+--------------------
FTTP on Demand 330 30 -- Available
--------------+-------------------+---------------+--------------+--------------------
ADSL Downstream Line Upstream Line Downstream Availability Date
Products Rate(Mbps) Rate(Mbps) Range(Mbps)
--------------+-------------------+---------------+--------------+--------------------
WBC ADSL 2+ Up to 1.5 -- 1 to 3.5 Available
ADSL Max Up to 1 -- 0.75 to 2.5 Available
WBC Fixed Rate 0.5 -- -- Available
Fixed Rate 0.5 -- -- Available
--------------+-------------------+---------------+--------------+--------------------
Other Availability Date
Offerings
--------------+-------------------+---------------+--------------+--------------------
VDSL Multicast -- -- -- Available
ADSL Multicast -- -- -- Available
--------------+-------------------+---------------+--------------+--------------------
So it looks like you are possibly too far from your cabinet to get FTTC due to the length of the line from the cabinet to your home resulting in a too slow of a speed, which is why its not showing.
This isn't that bad as it sounds, according to the Openreach Where and when page, for your address it says the following:
The cabinet that serves your premises is live, but your speeds aren't as fast as we'd like them to be. Your area has been reviewed and there is a plan to do further work to increase speeds via FTTP technology.
We follow a different design and build process for FTTP so you won't see updates at each stage. As soon as we have built the network and made services available, you will see an 'Accepting Orders' message.
So you "might" and I say might end up getting FTTP after all
Paul
Edited by PaulKirby (Sat 02-Dec-17 10:21:12)