General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | >> (show all)   Print Thread
Standard User deleted
(deleted) Tue 05-Feb-19 21:26:46
Print Post

FTTH 1gbps not getting full speed on 1 PC out of 2


[link to this post]
 
Hi i have 2 computers one of them i use as a gaming PC and the other one i use as a home server(old gaming PC) and i am not getting full WAN speed on the home server on https://www.speedtest.net but on the gaming PC i am getting full speed. Both have gigabit LAN adapters and the router is gigabit. The file transfer between the 2 PC's locally happens at 100MB/s.

Local File Transfer
The speed tests where done with nothing running on it only speedtest.net
Gaming PC Speedtest
Server PC Speedtest

Home server specs
Gaming PC specs

what can i do to speed up the home server?
Standard User gary333
(newbie) Tue 05-Feb-19 21:38:42
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
Have you tried doing the speedtest on your server in Safe Mode to rule out a stray Anti Virus, Firewall or even Windows Defender messing things up?

If this makes no difference, have you tried putting the network cable from your games pc in to your server to rule out any hardware faults (like cables, or ports on the router)?
Standard User deleted
(deleted) Tue 05-Feb-19 21:59:50
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: gary333] [link to this post]
 
i will try safe mode with networking. I did change the LAN ports but not the wire because the Server PC is not close to the router and LAN file transfer speed is good but i will change the wire and try also. ty


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Tue 05-Feb-19 22:28:53
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: gary333] [link to this post]
 
safe mode speedtest
New wire speedtest

This much fluctuation was there before, only on the server pc. and i forgot to mention this is happening both on the on-board LAN card and PCIe LAN card.
i am going to try a few different OS and if that dont work idk maybe my ram is to [censored] or my cpu is to old idk :<
Standard User Taras
(eat-sleep-adslguide) Tue 05-Feb-19 22:35:28
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
Are they the same cards ?

Also do the pc configurations differ massively ?
Standard User deleted
(deleted) Tue 05-Feb-19 22:49:34
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: Taras] [link to this post]
 
The on-board card is made by Atheros and the PCIe card is by realtek. they give the same result.

Yeah i have posted the PC specs. Server PC has Intel Core2 Quad Processor Q6600 and the gaming PC has i7 3770k
Standard User adrenalize_
(learned) Tue 05-Feb-19 23:52:07
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
Have you looked at the performance of your server during the speedtests with task manager/performance tab? As it's an older machine I wonder if your GPU or CPU is limiting the performance, web based testers may be using quite a lot compared with the resources for file copying.
Standard User deleted
(deleted) Wed 06-Feb-19 00:23:27
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: adrenalize_] [link to this post]
 
omg yes 80-90% cpu usage at 600mbps download and 50% for 900mbps upload.
i guess that solves it need a better cpu. tyvm
Standard User adslmax
(knowledge is power) Wed 06-Feb-19 00:53:36
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
2 Gigabit Ethernet Lan Card is best!
Standard User deleted
(deleted) Wed 06-Feb-19 01:00:57
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: adslmax] [link to this post]
 
if i buy 2gigabit lan card will that take the load of my cpu a lil?
are u saying 2gigbit lan card will get me 1gbps on this cpu?
Standard User adslmax
(knowledge is power) Wed 06-Feb-19 01:12:27
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
Yes. EG1064 Desktop Network Lan Adapter, 10/100/1000/2000 Mbps, 64-bit PCI 2.2, Full-Height, Retail
Standard User deleted
(deleted) Wed 06-Feb-19 02:11:42
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: adslmax] [link to this post]
 
ok ty
Standard User Banger
(eat-sleep-adslguide) Wed 06-Feb-19 07:32:28
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
What OS is on the Server?

Tim
www.uno.net.uk & freenetname
Asus DSL-N55U and ZyXEL VMG1312-B10A Bridge on 80/20 Meg Fibre
Speed Test

Current Sync: 79993/19661

BQM
Standard User adrenalize_
(learned) Wed 06-Feb-19 08:03:25
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
I doubt it will give you better performance on the current CPU - when doing a web based speedtest, web browsers are pretty CPU/GPU hungry. I don't know what you use the server for: media server, web sites etc but is it actually impacting the performance of that? IMHO if you really do actually need the server to serve to the WAN/internet at your (very impressive I might add) internet speeds I would suggest a newer architecture.
Administrator MrSaffron
(staff) Wed 06-Feb-19 10:10:42
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: adslmax] [link to this post]
 
What a load of tosh...

A 2 Gbps Ethernet card will only help if

1. Reduces processing load elsewhere in PC
2. The interface at the other end is also capable of 2 Gbps, and most routers support just 1 Gbps

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Wed 06-Feb-19 12:26:40
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: MrSaffron] [link to this post]
 
There isn't even any such thing as a 2gb network card. That is a badly described 1gb card.

There are 1gb, 2.5gb, 5gb and 10gb standards but not 2gb.
Standard User deleted
(deleted) Wed 06-Feb-19 17:15:22
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: Banger] [link to this post]
 
In reply to a post by Banger:
What OS is on the Server?

windows server 2012 atm i was usin 2016
do you know of a better windows based OS for this server?
i had used just normal windows 10 and 7 before but the vpn server on it sucks.

Edited by deleted (Wed 06-Feb-19 17:34:24)

Standard User deleted
(deleted) Wed 06-Feb-19 17:30:07
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: adrenalize_] [link to this post]
 
In reply to a post by adrenalize_:
I doubt it will give you better performance on the current CPU - when doing a web based speedtest, web browsers are pretty CPU/GPU hungry. I don't know what you use the server for: media server, web sites etc but is it actually impacting the performance of that? IMHO if you really do actually need the server to serve to the WAN/internet at your (very impressive I might add) internet speeds I would suggest a newer architecture.


ty. i mainly use the server for media and ts3 voice server but i have also hosted a vpn for my friends and IIS for playing around with websites and FTP server.

i am not going to get that card its too expensive and they dont make it anymore . i did buy a 9 euro card that says it has 2000mbps @ full duplex i am omw to get it now but after reading the forum i dont think its going to work. anyway i know what the prob is and i will use it as it is for now. It for personal use anyway. Thank you every one for the help.
Standard User candlerb
(committed) Wed 06-Feb-19 18:01:30
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
I'd suggest you get a genuine Intel 1G NIC. They are good quality and have good drivers.

Example: https://www.amazon.co.uk/dp/B00BL4PQ9Y/
Standard User deleted
(deleted) Wed 06-Feb-19 18:11:18
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: candlerb] [link to this post]
 
In reply to a post by candlerb:
I'd suggest you get a genuine Intel 1G NIC. They are good quality and have good drivers.

Example: https://www.amazon.co.uk/dp/B00BL4PQ9Y/

nice it says it will Interrupt moderation: Delivers increased performance while significantly reducing CPU usage

i will try and return the one that i bought and buy this

any cards here that are like the intel one?
https://www.pccomponentes.com/tarjetas-de-red

Edited by deleted (Wed 06-Feb-19 18:18:57)

Standard User Banger
(eat-sleep-adslguide) Wed 06-Feb-19 19:29:28
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
In reply to a post by kushalgoaten:
In reply to a post by Banger:
What OS is on the Server?

windows server 2012 atm i was usin 2016
do you know of a better windows based OS for this server?
i had used just normal windows 10 and 7 before but the vpn server on it sucks.


I am not familiar with those OS. Could it be an RWIN issue as XP used to suffer from or as others have suggested CPU bottleneck?

Tim
www.uno.net.uk & freenetname
Asus DSL-N55U and ZyXEL VMG1312-B10A Bridge on 80/20 Meg Fibre
Speed Test

Current Sync: 79993/19661

BQM
Standard User deleted
(deleted) Wed 06-Feb-19 20:07:33
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: candlerb] [link to this post]
 
In reply to a post by candlerb:
I'd suggest you get a genuine Intel 1G NIC. They are good quality and have good drivers.

Example: https://www.amazon.co.uk/dp/B00BL4PQ9Y/


this one is the same as that right? the name is a little bit different.

https://www.amazon.es/Intel-EXPI9301CT-Adaptador-Gig...
Standard User deleted
(deleted) Wed 06-Feb-19 20:10:42
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: Banger] [link to this post]
 
In reply to a post by Banger:
In reply to a post by kushalgoaten:
In reply to a post by Banger:
What OS is on the Server?

windows server 2012 atm i was usin 2016
do you know of a better windows based OS for this server?
i had used just normal windows 10 and 7 before but the vpn server on it sucks.


I am not familiar with those OS. Could it be an RWIN issue as XP used to suffer from or as others have suggested CPU bottleneck?

i dont know wat rwin is. looks like the prob is in the cpu
Standard User Banger
(eat-sleep-adslguide) Wed 06-Feb-19 20:13:57
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
RWIN is receive window. Used to be a problem in XP with higher speeds and had to be tweaked manually. Windows 8 brought an automatic RWIN which doesnt need tweaking. Not sure what server software does with RWIN.

Tim
www.uno.net.uk & freenetname
Asus DSL-N55U and ZyXEL VMG1312-B10A Bridge on 80/20 Meg Fibre
Speed Test

Current Sync: 79993/19661

BQM
Standard User deleted
(deleted) Wed 06-Feb-19 20:16:34
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: Banger] [link to this post]
 
the win server 2012 is based on 8 by the looks of it
Standard User candlerb
(committed) Wed 06-Feb-19 22:32:14
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
In reply to a post by kushalgoaten:
this one is the same as that right? the name is a little bit different.

https://www.amazon.es/Intel-EXPI9301CT-Adaptador-Gig...


https://www.intel.co.uk/content/www/uk/en/ethernet-p...

The Intel Gigabit CT desktop adapter has order code EXPI9301CT, and that's the one you found. It should be fine.

The i210-T1 is a more expensive "server" card, but for home use I doubt you'll notice much difference.
Standard User deleted
(deleted) Wed 06-Feb-19 22:42:22
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: candlerb] [link to this post]
 
In reply to a post by candlerb:
In reply to a post by kushalgoaten:
this one is the same as that right? the name is a little bit different.

https://www.amazon.es/Intel-EXPI9301CT-Adaptador-Gig...


https://www.intel.co.uk/content/www/uk/en/ethernet-p...

The Intel Gigabit CT desktop adapter has order code EXPI9301CT, and that's the one you found. It should be fine.

The i210-T1 is a more expensive "server" card, but for home use I doubt you'll notice much difference.


alright i will get Intel EXPI9301CT - Adaptador Gigabit PRO/1000 CT and try it out. thanks

Edited by deleted (Wed 06-Feb-19 22:43:46)

Standard User deleted
(deleted) Thu 07-Feb-19 23:47:05
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: adslmax] [link to this post]
 
In reply to a post by adslmax:
Yes. EG1064 Desktop Network Lan Adapter, 10/100/1000/2000 Mbps, 64-bit PCI 2.2, Full-Height, Retail


http://downloads.linksys.com/downloads/userguide/122...

Chapter 2: Getting to Know the 10/100/1000 Gigabit Network Adapter
Standard User Chrysalis
(legend) Fri 08-Feb-19 03:30:10
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
what is the full brand and model of the lan ports on the 2 machines?

also drivers used, settings etc.

Sky Fibre Pro BQM - IPv4 BQM - IPv6
Standard User deleted
(deleted) Sat 16-Feb-19 14:21:09
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: Chrysalis] [link to this post]
 
after installing the Intel CT 1000 LAN card i am getting 800mbps down and 900mbps up.
Standard User candlerb
(committed) Sun 17-Feb-19 13:14:33
Print Post

Re: FTTH 1gbps not getting full speed on 1 PC out of 2


[re: deleted] [link to this post]
 
Yay smile
Pages in this thread: 1 | 2 | 3 | 4 | >> (show all)   Print Thread

Jump to