General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread
Standard User dect
(fountain of knowledge) Thu 21-May-20 22:02:58
Print Post

Re: GPON FTTP Install.


[re: Zarjaz] [link to this post]
 
Know of anyone who has a picture of a new style CSP and its dimensions
Standard User APTMAN
(member) Fri 22-May-20 15:45:37
Print Post

Re: GPON FTTP Install.


[re: Highland76] [link to this post]
 
In reply to a post by Highland76:
Yep my install was done in 2017.

Are the latest CSPs smaller as there's no need to coil spare fibres anymore?

These are guts of my CSP

https://i.postimg.cc/ZKRCN8x6/IMG-0360.jpg
https://i.postimg.cc/FKtRw25x/IMG-0361.jpg
https://i.postimg.cc/L8g5Cm7X/IMG-0362.jpg
https://i.postimg.cc/TY4hJKtF/IMG-0363.jpg
https://i.postimg.cc/PqmxH2dn/IMG-0364.jpg


Not sure if it's me but your links do not work.

Can you get your tape measure out and measure the new CSP please.
Standard User Highland76
(learned) Fri 22-May-20 16:57:29
Print Post

Re: GPON FTTP Install.


[re: APTMAN] [link to this post]
 
Links still seem to be valid but here's a different one

https://imgur.com/a/R19T56P

Exact CSP dimensions are 16 x 10 cm but mine was installed in 2017. No idea on the dimensions of the latest CSP.

BT Business FTTP 330/50 -- Asus RT-AX89X


Register (or login) on our website and you will not see this ad.

Standard User APTMAN
(member) Fri 22-May-20 17:11:03
Print Post

Re: GPON FTTP Install.


[re: Highland76] [link to this post]
 
In reply to a post by Highland76:
Links still seem to be valid but here's a different one

https://imgur.com/a/R19T56P

Exact CSP dimensions are 16 x 10 cm but mine was installed in 2017. No idea on the dimensions of the latest CSP.


Thanks.
Yes the links do work, My fault, Laptop issue.
Standard User APTMAN
(member) Tue 26-May-20 12:54:14
Print Post

Re: GPON FTTP Install.


[re: APTMAN] [link to this post]
 
Going for our 'Government approved walk' yesterday I noticed new FTTP equipment on some BT poles and new manholes down this lane on the far end of our village smile , using the BT checker for the properties near there and None are enabled for FTTP yet only on Demand available at a silly cost.

Will the whole village/ area be enabled or will it go live in stages ?.
Administrator MrSaffron
(staff) Tue 26-May-20 13:22:37
Print Post

Re: GPON FTTP Install.


[re: APTMAN] [link to this post]
 
Can be weeks or months between some parts appearing and going live, due to how easy it is for some teams to carry on working

If a village is one of the named fibre villages then generally you see various phases, but for some it all almost goes live at the same time.

Unlikely anyone installing the kit will know the full story and even at higher levels things happen that change timelines all too often.

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User APTMAN
(member) Tue 26-May-20 14:19:21
Print Post

Re: GPON FTTP Install.


[re: MrSaffron] [link to this post]
 
Thanks Mr S .
I will keep an eye on the checkers.

What I will do in the mean time is to install some more sockets in our covered enclosed porch (our porch is an area in the house where the consumer units and electric meter are also our BT landline and my DSL modem ) for the equipment and also first fit some plywood to the area were the CSP and ONT, my 16 port network switch and hardware firewall. (it's easier to screw things to the plywood then drilling and plugging the wall each time smile )

Do we know what size the new ONT and CSP are ?.
Pages in this thread: 1 | 2 | [3] | (show all)   Print Thread

Jump to