General Discussion
  >> Fibre Broadband


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | (show all)   Print Thread
Standard User adslmax
(knowledge is power) Tue 02-Jun-20 10:46:23
Print Post

Change on my line


[link to this post]
 
I noticed there is change in my line after 64 days stable:

Before:

adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 21537 Kbps, Downstream rate = 82706 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.1 13.4
Attn(dB): 11.5 0.0
Pwr(dBm): 12.1 -0.2
Interleave depth: 16 1
INP: 48.00 0
G.INP: Enabled Not enabled

Total time = 64 days 20 hours 11 min 46 sec
FEC: 10237570 455968
CRC: 2195 7648
ES: 104 3959
SES: 46 61
UAS: 28 28
LOS: 0 0
LOF: 0 0
LOM: 0 0

After:

adsl info --stats
adsl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 1
Last initialization procedure status: 1
Max: Upstream rate = 26916 Kbps, Downstream rate = 97112 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 9.9 17.5
Attn(dB): 11.1 0.0
Pwr(dBm): 13.0 -0.7
Interleave depth: 8 8
INP: 47.00 47.00
G.INP: Enabled Enabled

PN FTTC 80/20 since 2014

Edited by adslmax (Tue 02-Jun-20 10:47:23)

Administrator MrSaffron
(staff) Tue 02-Jun-20 11:05:54
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
A lot of data presented, you might help people if you point out the change you have seen.

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User adslmax
(knowledge is power) Tue 02-Jun-20 11:27:24
Print Post

Re: Change on my line


[re: MrSaffron] [link to this post]
 
Been remain 80/20 for the last six years now! I was lucky smile

PN FTTC 80/20 since 2014


Register (or login) on our website and you will not see this ad.

Standard User ian72
(eat-sleep-adslguide) Tue 02-Jun-20 11:42:40
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
Looks like G.INP has fully enabled - is that the change you are looking for us to hunt down within that? Do I win a prize if I have correctly read your mind?
Standard User adslmax
(knowledge is power) Tue 02-Jun-20 11:46:11
Print Post

Re: Change on my line


[re: ian72] [link to this post]
 
G.INP has been enabled for a long while on the downstream for almost 64 days but now it kicked in for upstream as well.

PN FTTC 80/20 since 2014
Standard User jdigzlol7
(newbie) Tue 02-Jun-20 11:51:07
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
Receive Direction Send Direction
Max. DSLAM throughput kbit/s 80000 20000
Min. DSLAM throughput kbit/s 128 128
Attainable throughput kbit/s 134676 30161
Current throughput kbit/s 79998 19999
Seamless rate adaptation off off

Latency fast fast
Impulse Noise Protection (INP) 40 0
G.INP on off

Signal-to-noise ratio dB 22 15
Bitswap on on
Line attenuation dB 9 9
approximate line length m 168

Profile 17a
G.Vector full full

Carrier record A43 A43


Very nice stats max
Standard User ian72
(eat-sleep-adslguide) Tue 02-Jun-20 12:54:48
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
So are you just sharing your stats for general interest or is there something specific you are either asking or saying?
Standard User paulsmith109
(experienced) Tue 02-Jun-20 19:29:04
Print Post

Re: Change on my line


[re: jdigzlol7] [link to this post]
 
In reply to a post by jdigzlol7:
Receive Direction Send Direction
Max. DSLAM throughput kbit/s 80000 20000
Min. DSLAM throughput kbit/s 128 128
Attainable throughput kbit/s 134676 30161
Current throughput kbit/s 79998 19999
Seamless rate adaptation off off

Latency fast fast
Impulse Noise Protection (INP) 40 0
G.INP on off

Signal-to-noise ratio dB 22 15
Bitswap on on
Line attenuation dB 9 9
approximate line length m 168

Profile 17a
G.Vector full full

Carrier record A43 A43


Very nice stats max

Looks like Vectoring has been enabled on your line?
Standard User adslmax
(knowledge is power) Tue 02-Jun-20 21:28:51
Print Post

Re: Change on my line


[re: paulsmith109] [link to this post]
 
Vector are NOT available to all FTTC. The stats could be wrong from the modem.

PN FTTC 80/20 since 2014

Edited by adslmax (Tue 02-Jun-20 21:29:33)

Standard User giggsy1977
(member) Tue 02-Jun-20 22:32:35
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
Nice stats! Lucky you! How can I tell I'd GINP or vectoring is enabled on my line? I have Sky FTTC with the SR203 router. Thanks. 🙂

Sky Fibre Superfast - 70mbps down, 16.5mbps up. Noise down - 2.5dB, noise up - 4.8dB
Standard User jdigzlol7
(newbie) Wed 03-Jun-20 09:27:38
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
In reply to a post by adslmax:
Vector are NOT available to all FTTC. The stats could be wrong from the modem.


It's a vectoring cab stats are correct.
Standard User jdigzlol7
(newbie) Wed 03-Jun-20 09:28:13
Print Post

Re: Change on my line


[re: paulsmith109] [link to this post]
 
Yeah its a BDUK cab that has vectoring enabled.
Standard User adslmax
(knowledge is power) Tue 16-Jun-20 22:12:31
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 2
Last initialization procedure status: 3
Max: Upstream rate = 22219 Kbps, Downstream rate = 81759 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.9 12.1
Attn(dB): 11.1 0.0
Pwr(dBm): 12.4 1.4
Interleave depth: 16 1
INP: 48.00 0
G.INP: Enabled Not enabled

PN FTTC 80/20 since 2014
Standard User adslmax
(knowledge is power) Tue 30-Jun-20 22:48:32
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
Change over to Plusnet Hub One 3 days running:

1. Product name:Plusnet Hub
2. Serial number:***********************
3. Firmware version:Software version 4.7.5.1.83.8.237.2.2 Last updated 10/11/17
4. Board version:Plusnet Hub One
5. DSL uptime:3 days, 13:42:46
6. Data rate:19999 / 77903
7. Maximum data rate:24877 / 77645
8. Noise margin:16.3 / 4.0
9. Line attenuation:12.6 / 10.8
10. Signal attenuation:12.6 / 10.8
11. Data sent/received:62.7 GB / 142.0 GB

Having a new 2nd line soon for new G.fast 330/50 installation, I am using Plusnet Hub One for FTTC and Zyxel XMG 3927-B50A Wireless AC2400Mbps Router for G.fast

Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 8
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability Date WBC SOGEA Availability Date Left in Jumper
High Low High Low
VDSL Range A (Clean) 80 67 20 19 60.5 Available Available --
VDSL Range B (Impacted) 80 65.4 20 19 59.3 Available Available --
G.fast Range A (Clean) 317.5 230 50 25.3 204.3 Available Available --
G.fast Range B (Impacted) 268.7 197.8 36 17.7 181.4 Available Available --
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Range (Mbps) Availability Date FTTP Install Process
FTTP on Demand 330 30 -- Available --
ADSL Products Downstream Line Rate (Mbps) Upstream Line Rate (Mbps) Downstream Range(Mbps) ADSL Availability Date WBC SOADSL Availability Date Left in Jumper
WBC ADSL 2+ Up to 5 -- 3 to 7.5 Available Available --
ADSL Max Up to 4 -- 2.5 to 7 Available Available --
WBC Fixed Rate 2 -- -- Available Available --
Fixed Rate 2 -- -- Available -- --

PN FTTC 80/20 since 2014

Edited by adslmax (Tue 30-Jun-20 22:59:59)

Standard User j0hn83
(fountain of knowledge) Tue 30-Jun-20 23:23:30
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
Why do you need 2 lines? You barely use the 1st.
Standard User adslmax
(knowledge is power) Tue 30-Jun-20 23:33:44
Print Post

Re: Change on my line


[re: j0hn83] [link to this post]
 
In reply to a post by j0hn83:
Why do you need 2 lines? You barely use the 1st.


My daughter can have PN FTTC

I want to have my own G.fast

PN FTTC 80/20 since 2014
Standard User adslmax
(knowledge is power) Thu 02-Jul-20 12:29:17
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
G.fast order cancelled. Don't need it now. Stay with 80/20 fibre.

PN FTTC 80/20 since 2014
Standard User jpm
(newbie) Thu 02-Jul-20 12:41:26
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
lmao
Standard User adslmax
(knowledge is power) Thu 02-Jul-20 12:42:35
Print Post

Re: Change on my line


[re: jpm] [link to this post]
 
Don't need the extra speed for two of us in the house.

PN FTTC 80/20 since 2014
Standard User candlerb
(experienced) Thu 02-Jul-20 15:08:14
Print Post

Re: Change on my line


[re: jpm] [link to this post]
 
I have an overwhelming sense of déja vue...
Standard User dect
(fountain of knowledge) Thu 02-Jul-20 15:09:09
Print Post

Re: Change on my line


[re: candlerb] [link to this post]
 
In reply to a post by candlerb:
I have an overwhelming sense of déja vue...
I have an overwhelming sense of déja vue...
Standard User MCM
(knowledge is power) Thu 02-Jul-20 15:29:43
Print Post

Re: Change on my line


[re: dect] [link to this post]
 
Ground Hog day all over again.
Standard User dect
(fountain of knowledge) Thu 02-Jul-20 15:35:40
Print Post

Re: Change on my line


[re: MCM] [link to this post]
 
In reply to a post by MCM:
Ground Hog day all over again.
Wonder what Punxsutawney Phil is doing today
Standard User MC31
(member) Thu 02-Jul-20 17:03:30
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
People who just keep wasting SP time / money just put the prices up for everyone.Its just a bit sad.

these comments are my own and in no way represent any company that i may or may not be linked too.
Standard User adslmax
(knowledge is power) Mon 06-Jul-20 09:40:18
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
Good job I didn't went ahead with G.fast as unbelievable cheeky of BTw Checker has reduced very large drop in G.fast as the checker has changed:

Before:

Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 8
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability Date WBC SOGEA Availability Date Left in Jumper
High Low High Low
VDSL Range A (Clean) 80 67 20 19 60.5 Available Available --
VDSL Range B (Impacted) 80 65.4 20 19 59.3 Available Available --
G.fast Range A (Clean) 317.5 230 50 25.3 204.3 Available Available --
G.fast Range B (Impacted) 268.7 197.8 36 17.7 181.4 Available Available --

Now:

Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 8
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability Date WBC SOGEA Availability Date Left in Jumper
High Low High Low
VDSL Range A (Clean) 80 67 20 19 61.2 Available Available --
VDSL Range B (Impacted) 80 65.4 20 19 58.7 Available Available --
G.fast Range A (Clean) 201 155.8 28.5 11.8 134.1 Amber Amber --
G.fast Range B (Impacted) 161.3 106.8 19 9 98.1 Amber Amber --

G.fast are a waste of reduced speed for no reason! Pretty silly ain't it?
https://ibb.co/Wv8HPLn

PN FTTC 80/20 since 2014

Edited by adslmax (Mon 06-Jul-20 10:12:00)

Standard User robertcrowther
(committed) Mon 06-Jul-20 10:38:03
Print Post

Re: Change on my line


[re: adslmax] [link to this post]
 
In reply to a post by adslmax:
Good job I didn't went ahead with G.fast as unbelievable cheeky of BTw Checker has reduced very large drop in G.fast as the checker has changed:

Before:

Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 8
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability Date WBC SOGEA Availability Date Left in Jumper
High Low High Low
VDSL Range A (Clean) 80 67 20 19 60.5 Available Available --
VDSL Range B (Impacted) 80 65.4 20 19 59.3 Available Available --
G.fast Range A (Clean) 317.5 230 50 25.3 204.3 Available Available --
G.fast Range B (Impacted) 268.7 197.8 36 17.7 181.4 Available Available --

Now:

Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 8
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability Date WBC SOGEA Availability Date Left in Jumper
High Low High Low
VDSL Range A (Clean) 80 67 20 19 61.2 Available Available --
VDSL Range B (Impacted) 80 65.4 20 19 58.7 Available Available --
G.fast Range A (Clean) 201 155.8 28.5 11.8 134.1 Amber Amber --
G.fast Range B (Impacted) 161.3 106.8 19 9 98.1 Amber Amber --

G.fast are a waste of reduced speed for no reason! Pretty silly ain't it?
https://ibb.co/Wv8HPLn


Interesting, what you have posted. Why?

Because if you had ever been on g.fast in the past as you have claimed on this forum and other forums then it would have appeared on the observed speeds section. The only conclusion is that either you have posted someone else's results (possible as you've made a typo in your written results in your post) or you never had g.fast

Edited by robertcrowther (Mon 06-Jul-20 10:38:59)

Pages in this thread: 1 | 2 | 3 | (show all)   Print Thread

Jump to