Hi,
I've recently had Octaplus (City Fibre) installed.
I currently at best pull around 750/750 give or take after doing various speed tests.
I am aware there are various variables that can effect results, however I am just wanting advice on if my setup is sufficent to prevent any bottlenecks within my home.
Everything I refer to is 'Wired' not wifi.
I initially had the supplied pre-configured router installed (TP-LINK EX230V), which gave me similar speed test results to my Netgear R7800 router.
I decided to set up the connection on my Netgear router (Nighthawk(R) X4S R7800).
Cables used are all good quality Cat 7 cables.
No VPN or anything else connected.
Static IP (not on CGNAT)
My connected device for testing is linked as follows...
FIBRE WALL SOCKET RJ45 -> Netgear Nighthawk(R) X4S R7800 -> Netgear JGS516 Unmanaged 16 Port Network Switch 10/100/1000Mpbs -> ASUS RAMPAGE V EXTREME LAN Port 1000/1000 (green light indicates 1000 link)
Obviously if I can get as close as possible to 900MB (as reported 900+ can be obtained) I'd like to do so.
Just wondering if I need to consider looking at a hardware upgrade?
Thanks in advance



Print Thread
