|
|
|
I've just got a Hey Broadband fibre connection. The engineer showed it running with their router at 900/900 up down.
I've since connected my own router, an Asus rt ax82u directly to the ONT, a adtran sdx611.
I've used the same cable to go from the router to the ONT and have a gigabit cable from the router to my laptop, which is showing as a gigabit connection.
However on speed test the best I get is 300/300 up down.
Any ideas on settings I should be changing to get my full speed?
|
|
|
|
Let's start here. Have you managed 900/900 with their router?
|
|
|
|
Yep it was running at 900/900 using their router.
Just swapped the routers over keeping all the same cables and it dropped to 300/300
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
What happens if you change back to their router?
Michael Chare
|
|
|
|
Goes back up to 900/900.
Already tried a lot of router swapping etc which is why I'm pretty sure it's something to do with the ax82u
|
|
|
Goes back up to 900/900.
Already tried a lot of router swapping etc which is why I'm pretty sure it's something to do with the ax82u Can you change the WAN mac address of the ax82u so that is the same as Hey router?
Michael Chare
|
|
|
|
Have you done a firmware update and then a reset to factory defaults on the Asus router?
|
|
|
|
Yeah it firmware updates everyday so it's up to date.
Not going to factory setup as my network relies on a specific set of assigned manual op addresses and I don't want to lose that.
I'd rather work out what the issue is that is affecting the router's ability to operate at the full speed offered to it.
|
|
|
Check if you have any firewalling add ins enabled. Or do you use pppoe ?
24 years of broadband connectivity since 1999 trial - Live BQM
|
|
|
|
the ax82u doesn't get a firmware update everyday..
Do a backup of the config and then reset the ax82u. then try the router in its default state to rule out your config.
The latest version - ASUS RT-AX82U Firmware version 3.0.0.4.388_24963 does have a wan instability fix.
|
|
|
|
That's exactly what u did to get a connection in the first place. The ONT refused to connect before I cloned the MAC
|
|
|
|
Sorry phrased badly, the router is set to check and install new firmware every night, so definitely on the latest version.
I'll try taking a backup of the config tomorrow and see if it works.
|
|
|
|
Router is set to direct connect via the lan port with dchp. No PPoE.
I have the firewall etc settings on asus turned on
|
|
|
That’s is good. Any ASUS AX router should have no issue with 900 / 900 Mbps and without PPPoE things are easier on the CPU.
If you have any of the Trend Micro or other content inspection features turned on try with them off for a speed test.
24 years of broadband connectivity since 1999 trial - Live BQM
|
|
|
|
Turn off QOS on the router
|
|
|
|
Post deleted by wiggsc00
|
|
|
|
Their FAQ suggests you need a bridge device to use your own router
Can I use my own router?
Yes, we provide Bridge Mode* service for free. If you plan to use your own router and require bridge mode, please let us know before installation as this will require a special modem to be installed. Otherwise, you will be charged £60 for the extra engineer visit.
*We are not responsible for any configuration issues or processes for routers that are not provided nor placed by Hey!Broadband when installing a bridge mode. Our team only takes care of installation of the “bridge device” to give customers the possibility to use their own router. We kindly invite our customers to flag any issues with the provider of their router.
|
|
|
|
also do a speed test via the router - on my asus its hidden under adaptive qos and internet speed .........
|
|
|
The ONT is the "Bridge Device". Previously they were plugging the fibre directly into the router.
It seems they're now installing an ONT by default.
That said, I'm running an AC-86U and have not problems with speed, testing with Ookla's PC based tester.
TBB speed tester shows about 1/3 of the true speed.
Hey!Broadband 1Gb Fibre - Live BQM
Asus AC86U - Asuswrt Merlin
|
|
|
|
I run an ax92u which is a dual core armv8 at 1.8GHz, get 300 down and 600 up on my 300Mbit Zen connection.
The OP has an ax82u which is armv7 Tri-core at 1.5Ghz
Wondering if it might max out the CPU single core likely only for WAN.
|
|
|
I run an ax92u which is a dual core armv8 at 1.8GHz, get 300 down and 600 up on my 300Mbit Zen connection.
The OP has an ax82u which is armv7 Tri-core at 1.5Ghz
Wondering if it might max out the CPU single core likely only for WAN.
its unlikely to be that. What it could be is the OPs config which is now pushing the router the limits but we await updates
|