General Discussion
>> Fibre Broadband

Print Thread

Michael_Chare
(knowledge is power) Thu 03-Apr-25 16:22:15

How thick is the cable from the Customer Splice Point?

[link to this post]

How thick is the cable from the Customer Splice Point to the ONT?
Would it fit through a 10mm diameter hole?

Michael Chare

Zarjaz
(eat-sleep-adslguide) Thu 03-Apr-25 16:27:22

Re: How thick is the cable from the Customer Splice Point?

[re: Michael_Chare] [link to this post]

I reckon so.

It’s no thicker than dropwire, and that was an 8mm hole required.

54-46 was my number

PCJM40
(experienced) Thu 03-Apr-25 16:30:24

Re: How thick is the cable from the Customer Splice Point?

[re: Michael_Chare] [link to this post]

In reply to a post by Michael_Chare:
How thick is the cable from the Customer Splice Point to the ONT?
Would it fit through a 10mm diameter hole?

https://dexgreen.com/products/fiber-optic-inside-out...

Michael_Chare
(knowledge is power) Thu 03-Apr-25 16:58:58

Re: How thick is the cable from the Customer Splice Point?

[re: Zarjaz] [link to this post]

Thank you for the replies.

Michael Chare

Ripley
(experienced) Thu 03-Apr-25 19:37:29

Re: How thick is the cable from the Customer Splice Point?

[re: Michael_Chare] [link to this post]

Mine was installed today, I predrilled hole to avoid them drilling outwards and blowing a brick.

10mm was perfect for what he needed.

Freeserve Dial-Up --> BTopenworld --> <n>ildram -->Talk Talk LLU --> ZeN --> Vodaphone --> ZeN --> youfibre 2000 Mbps symmetric
Draytek 3912 & Draytek 1060C x 4

rarrar
(member) Fri 04-Apr-25 20:29:57

Re: How thick is the cable from the Customer Splice Point?

[re: Michael_Chare] [link to this post]

The 18m of internal fibre to my ONT is about 1mm diam, translucent and fixed by glue to the wall/ceiling corners.
Almost invisible

Pheasant
(eat-sleep-adslguide) Fri 04-Apr-25 23:36:38

Re: How thick is the cable from the Customer Splice Point?

[re: rarrar] [link to this post]

That will be an MDU install using OFS Invisilight - nice gear - but not used in the single dwelling market (that I'm aware of).

Print Thread

Jump to