In reply to a post by adslmax:

Vector are NOT available to all FTTC. The stats could be wrong from the modem.

It's a vectoring cab stats are correct.

Yeah its a BDUK cab that has vectoring enabled.

xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 2
Last initialization procedure status: 3
Max: Upstream rate = 22219 Kbps, Downstream rate = 81759 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.9 12.1
Attn(dB): 11.1 0.0
Pwr(dBm): 12.4 1.4
Interleave depth: 16 1
INP: 48.00 0
G.INP: Enabled Not enabled

Change over to Plusnet Hub One 3 days running:

1. Product name:Plusnet Hub
2. Serial number:***********************
3. Firmware version:Software version 4.7.5.1.83.8.237.2.2 Last updated 10/11/17
4. Board version:Plusnet Hub One
5. DSL uptime:3 days, 13:42:46
6. Data rate:19999 / 77903
7. Maximum data rate:24877 / 77645
8. Noise margin:16.3 / 4.0
9. Line attenuation:12.6 / 10.8
10. Signal attenuation:12.6 / 10.8
11. Data sent/received:62.7 GB / 142.0 GB

Having a new 2nd line soon for new G.fast 330/50 installation, I am using Plusnet Hub One for FTTC and Zyxel XMG 3927-B50A Wireless AC2400Mbps Router for G.fast

Telephone Number 01952****** on Exchange CUCKOO OAK is served by Cabinet 8
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability Date WBC SOGEA Availability Date Left in Jumper
High Low High Low
VDSL Range A (Clean) 80 67 20 19 60.5 Available Available --
VDSL Range B (Impacted) 80 65.4 20 19 59.3 Available Available --
G.fast Range A (Clean) 317.5 230 50 25.3 204.3 Available Available --
G.fast Range B (Impacted) 268.7 197.8 36 17.7 181.4 Available Available --
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Range (Mbps) Availability Date FTTP Install Process
FTTP on Demand 330 30 -- Available --
ADSL Products Downstream Line Rate (Mbps) Upstream Line Rate (Mbps) Downstream Range(Mbps) ADSL Availability Date WBC SOADSL Availability Date Left in Jumper
WBC ADSL 2+ Up to 5 -- 3 to 7.5 Available Available --
ADSL Max Up to 4 -- 2.5 to 7 Available Available --
WBC Fixed Rate 2 -- -- Available Available --
Fixed Rate 2 -- -- Available -- --

Edited by adslmax (Tue 30-Jun-20 22:59:59)

Why do you need 2 lines? You barely use the 1st.

In reply to a post by j0hn83:

Why do you need 2 lines? You barely use the 1st.

My daughter can have PN FTTC

I want to have my own G.fast

G.fast order cancelled. Don't need it now. Stay with 80/20 fibre.

lmao

Don't need the extra speed for two of us in the house.

I have an overwhelming sense of déja vue...