Peak time actual speed dropped to below 1Mb

Although the BT Wholesale seped test and the TB speed test show my speed as being normal, at peak times my internet speed has got a lot slower the last few days. Speedtest.net and download speeds show it at being at around 0.64Mb. Please ignore the high upstream noise margin as it happened before this was high:

Time Connected: 07:04:45
Status
Configured Current
Line Status --- SHOWTIME
Link Type --- Fast Path
Operation Mode G992.5(ADSL2+) G992.5(ADSL2+)
Data Rate Information
Stream Type Actual Data Rate
Upstream 779 (Kbps.)
Downstream 8867 (Kbps.)
Defect/Failure Indication
Operation Data Upstream Downstream
Noise Margin 11.0 dB 8.1 dB
Line Attenuation 20.9 dB 36.0 dB
Indicator Name Near End Indicator Far End Indicator
Output Power 12.7 dBm 0.0 dBm
Fast Path FEC Correction 0 0
Interleaved Path FEC Correction NA NA
Fast Path CRC Error 468 86
Interleaved Path CRC Error NA NA
Loss of Signal Defect 7 0
Fast Path HEC Error STR 3637 165
Interleaved Path HEC Error NA NA
Error Seconds 3213 1114
Statistics
Received Cells 32183041
Transmitted Cells 6517936

Edited by deleted (Tue 19-Feb-13 20:47:59)

Errors (ES) are high for 7 hrs connected, slowing line down, but would expect it to be all the time.

You should be getting about 11 Meg sync but they are holding you at higher than normal Down Target NM.

Are you taking stats from test socket? Try BT Quiet Line Test (17070 Opt 2) with router disconned. Should be completely quiet.

In reply to a post by XRaySpeX:

Errors (ES) are high for 7 hrs connected, slowing line down, but would expect it to be all the time.

You should be getting about 11 Meg sync but they are holding you at higher than normal Down Target NM.

Are you taking stats from test socket? Try BT Quiet Line Test (17070 Opt 2) with router disconned. Should be completely quiet.

Yes this is from the test socket. My line is quiet. My router resynced earlier but didn't reset the error seconds thats why there is so many.