Pages in this thread: 
Print Thread
Here's the start of the hacking - I found the serial header and took a boot log:
HELO
CPUI
L1CI
HELO
CPUI
L1CI
DRAM
----
PHYS
STRF
400H
PHYE
DDR2
SIZ4
SIZ3
SIZ2
DINT
USYN
LSYN
MFAS
LMBE
RACE
PASS
----
ZBSS
CODE
DATA
L12F
ROMM
====
HELO
ZBSS
RAMM
====
Copyright (C) 2013 Arcadyan Technology.
NANDFLASH:
DEVICE ID: 0x92f1809540, size: 131072KB, type: SLC
block: 128KB(1024), page: 2KB, oob: 64Bytes
nandflash_bbt_scan_block: detect bad block marker @ 0x7fe0000
NANDFLASH:
DEVICE ID: 0x92f1809540, size: 131072KB, type: SLC
block: 128KB(1024), page: 2KB, oob: 64Bytes
nandflash_bbt_scan_block: detect bad block marker @ 0x7fe0000
NVRAM(0) MAGIC checking passed!
NVRAM(0) CRC checking passed!
total 5 of NVRAM(0) entries loaded
NVRAM(1) MAGIC checking passed!
NVRAM(1) CRC checking passed!
total 8 of NVRAM(1) entries loaded
env_delenv bootcmd:1
BOOTLOADER version 0.0.9 for BrightBox2
Build Date: Thu Aug 8 18:14:37 2013 (brian_chang@BuildBed)
Chip ID: BCM63168D0, MIPS: 400MHz, DDR2: 400MHz, Bus: 200MHz
Memory Test Passed!
Total Memory: 134217728 bytes (128MB)
Total memory used by CFE: 0x87500000 - 0x876260F0 (1204464)
Initialized Data: 0x87522F60 - 0x87523610 (1712)
BSS Area: 0x87523610 - 0x875240F0 (2784)
Local Heap: 0x875240F0 - 0x876240F0 (1048576)
Stack Area: 0x876240F0 - 0x876260F0 (8192)
Text (code) segment: 0x87500000 - 0x87522F2C (143148)
Boot area (physical): 0x074BF000 - 0x074FF000
Relocation Factor: I:00000000 - D:00000000
Board IP address 192.168.1.1
Board IP netmask 255.255.255.0
Gateway IP address 0.0.0.0
Server IP address 192.168.1.99
Boot image (1 or 2) 1
MAC address number 1
MAC address base 9C-80-DF-3C-0C-50
*** Press any key to stop auto run (3 seconds) ***
Auto run second count down: 3210
Loading primary image ...
Finished loading 3145728 bytes
DATE : Thu Jan 16 12:53:50 2014
VER : v0.01.47.0001
CRC : C67BD1BF
Code Address: 0x80010000, Entry Address: 0x802735d0
Decompression OK!
Entry at 0x802735d0
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.
Starting program at 0x802735d0
Linux version 2.6.30 (brian_chang@BuildBed) (gcc version 4.1.2) #1 SMP PREEMPT Thu Jan 16 12:41:38 CST 2014
Detected Broadcom 0x63168 CPU revision d0
CPU frequency is 400 MHz
128MB of RAM installed
registering 48 GPIOs
console [early0] enabled
CPU revision is: 0002a080 (Broadcom BCM63168)
Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (00009326-00009321=5<300)
board_bcm963268: board name: BrightBox2
Determined physical RAM map:
memory: 07ece000 @ 00000000 (usable)
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00007ece
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00007ece
On node 0 totalpages: 32462
free_area_init_node: node 0, pgdat 803035b0, node_mem_map 81000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 222 pages used for memmap
Normal zone: 28144 pages, LIFO batch:7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32208
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock4 ro rootfstype=squashfs
wait instruction: enabled
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
NR_IRQS:92
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125176k/129848k available (2476k kernel code, 4500k reserved, 557k data, 152k init, 0k highmem)
Calibrating delay loop... 399.36 BogoMIPS (lpj=199680)
Mount-cache hash table entries: 512
--Kernel Config--
SMP=1
PREEMPT=1
DEBUG_SPINLOCK=0
DEBUG_MUTEXES=0
CPU revision is: 0002a080 (Broadcom BCM63168)
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Calibrating delay loop... 402.43 BogoMIPS (lpj=201216)
Brought up 2 CPUs
/proc/net/netfilter/nf_cli_bw_mon created
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10013fff]
pci 0000:00:00.0: reg 30 32bit mmio: [0x000000-0x0007ff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:09.0: reg 10 32bit mmio: [0xb0002600-0xb00026ff]
pci 0000:00:0a.0: reg 10 32bit mmio: [0xb0002500-0xb00025ff]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:02:00.0: reg 10 64bit mmio: [0x000000-0x007fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: disabled
pci 0000:01:00.0: MEM window: 0x11000000-0x110fffff
pci 0000:01:00.0: PREFETCH window: disabled
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:01:00.0 to 64
skbFreeTask created successfully
BLOG v3.0 Initialized
BLOG Rule v1.0 Initialized
Broadcom IQoS v0.1 Jan 16 2014 12:40:02 initialized
Broadcom GBPM v0.1 Jan 16 2014 12:40:03 initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
bcmPktDma_init: Broadcom Packet DMA Library initialized
Total # RxBds=1448
bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 244
io scheduler noop registered (default)
PCI: Setting latency timer of device 0000:01:00.0 to 64
bcm63268-uart.0: ttyS0 at MMIO 0xb0000180 (irq = 13) is a bcm63268-uart0
\CAconsole handover: boot [early0] -> real [ttyS0]
bcm63268-uart.1: ttyS1 at MMIO 0xb00001a0 (irq = 42) is a bcm63268-uart1
loop: module loaded
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
Broadcom NAND FLASH Controller Version 4.0
NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Zentel NAND 128MiB 3,3V 8-bit)
NAND device: Erase 131072 bytes Write 2048 bytes OOB 64 bytes
Bad block table not found for chip 0
Bad block table not found for chip 0
Scanning device for bad blocks
Bad eraseblock 1023 at 0x000007fe0000
Bad block table written to 0x000007fc0000, version 0x01
Bad block table written to 0x000007fa0000, version 0x01
Creating 10 MTD partitions on "bcm63268-nand":
0x000000000000-0x000000100000 : "bootldr"
0x000000100000-0x000000180000 : "manuf"
0x000000180000-0x000000200000 : "nvram"
0x000000200000-0x000000500000 : "linux"
0x000000500000-0x000001900000 : "rootfs"
0x000001900000-0x000001a00000 : "pricfg"
0x000001a00000-0x000001d00000 : "sec_linux"
0x000001d00000-0x000003100000 : "sec_rootfs"
0x000003100000-0x000003200000 : "seccfg"
0x000003200000-0x000006200000 : "ubifs"
bcm63268-nand bcm63268-nand: at 0xb0000200 (irq 58, cache 0xb0000600) v1.0
Registered led device: wifi_green
Registered led device: power_green
Registered led device: vdata_green
Registered led device: vsync_green
Registered led device: vsync_red
Registered led device: power_red
Registered led device: vdata_red
Registered led device: wifi_int_green
Registered led device: vsync_orange
Registered led device: vdata_orange
Registered led device: wifi2G_green
Registered led device: wifi5G_green
GACT probability on
u32 classifier
Actions configured
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Bridge firewalling registered
Initializing MCPD Module
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Freeing unused kernel memory: 152k freed
System logger start...
Kernel logger start...
arc_oshal: module license 'Propritary' taints kernel.
Disabling lock debugging due to kernel taint
oshal_init(1110) DRV: Created Successfully
ARC_KERNEL_OSIX_init(402) DRV: Created Successfully
Broadcom Logger v0.1 Jan 16 2014 12:41:57
brcmchipinfo: brcm_chipinfo_init entry
Broadcom Ingress QoS Module Char Driver v0.1 Jan 16 2014 12:42:03 Registered<243>
Broadcom Ingress QoS ver 0.1 initialized
BPM: tot_mem_size=134217728B (128MB), buf_mem_size=20132655B (19MB), num of buffers=9460, buf size=2128
Broadcom BPM Module Char Driver v0.1 Jan 16 2014 12:42:04 Registered<244>
[NTC bpm] bpm_set_status: BPM status : enabled
bcmxtmrt: Broadcom BCM63168D0 ATM/PTM Network Device v0.4 Jan 16 2014 12:42:05
bcmxtmcfg: bcmxtmcfg_init entry
NBUFF v1.0 Initialized
[0;36;44mInitialized fcache state[0m
Broadcom Packet Flow Cache Char Driver v2.2 Jan 16 2014 12:42:10 Registered<242>
Created Proc FS /procfs/fcache
Broadcom Packet Flow Cache registered with netdev chain
[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.[0m
Constructed Broadcom Packet Flow Cache v2.2 Jan 16 2014 12:42:10
chipId 0x631680D0
Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Jan 16 2014 12:42:11 Registered <241>
Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000
FAP Soft Reset Done
4ke Reset Done
Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000
FAP Soft Reset Done
4ke Reset Done
FAP Debug values at 0xa541dbd0 0xa549dbd0
Allocated FAP0 GSO Buffers (0xA542EC58) : 1048576 bytes @ 0xA5500000
Allocated FAP1 GSO Buffers (0xA54AEC58) : 1048576 bytes @ 0xA5600000
Allocated FAP0 TM SDRAM Queue Storage (a542ec5c) : 341376 bytes @ a5700000
Allocated FAP1 TM SDRAM Queue Storage (a54aec5c) : 341376 bytes @ a5780000
[NTC fapProto] fapReset : Reset FAP Protocol layer
[FAP0] DSPRAM : stack <0x80000000><1536>, global <0x80000600><3960>, free <2696>, total<8192>
[FAP1] DSPRAM : stack <0x80000000><1536>, global <0x80000600><3960>, free <2696>, total<8192>
[FAP0] PSM : addr<0x80002000>, used <23452>, free <1124>, total <24576>
[FAP1] PSM : addr<0x80002000>, used <23452>, free <1124>, total <24576>
[FAP0] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948
[FAP1] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948
[FAP0] GSO Buffer set to 0xA5500000
[FAP1] GSO Buffer set to 0xA5600000
[FAP0] FAP BPM Initialized.
[FAP1] FAP BPM Initialized.
fapDrv_construct: FAP0: pManagedMemory=b0820650. wastage 8 bytes
fapDrv_construct: FAP1: pManagedMemory=b0a20650. wastage 8 bytes
bcmPktDma_bind: FAP Driver binding successfull
[FAP0] FAP TM: ON
[FAP1] FAP TM: ON
[NTC arl] arlEnable : Enabled ARL binding to FAP
Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Jan 16 2014 12:42:18 Registered <245>
adsl: adsl_init entry
Broadcom BCM63168D0 Ethernet Network Device v0.1 Jan 16 2014 12:42:20
Broadcom GMAC Char Driver v0.1 Jan 16 2014 12:42:24 Registered<249>
Broadcom GMAC Driver v0.1 Jan 16 2014 12:42:24 Initialized
fapDrv_psmAlloc: fapIdx=1, size: 4800, offset=b0a20650 bytes remaining 7000
ETH Init: Ch:0 - 200 tx BDs at 0xb0a20650
fapDrv_psmAlloc: fapIdx=0, size: 4800, offset=b0820650 bytes remaining 7000
ETH Init: Ch:1 - 200 tx BDs at 0xb0820650
fapDrv_psmAlloc: wastage 8 bytes
fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b0821910 bytes remaining 2184
ETH Init: Ch:0 - 600 rx BDs at 0xb0821910
fapDrv_psmAlloc: wastage 8 bytes
fapDrv_psmAlloc: fapIdx=1, size: 4808, offset=b0a21910 bytes remaining 2184
ETH Init: Ch:1 - 600 rx BDs at 0xb0a21910
bcm63268-dg: register bcmsw
eth2: MAC Address: 9C:80:DF:3C:0C:50
eth1: MAC Address: 9C:80:DF:3C:0C:50
eth0: MAC Address: 9C:80:DF:3C:0C:50
eth4: MAC Address: 9C:80:DF:3C:0C:53
eth3: MAC Address: 9C:80:DF:3C:0C:50
Broadcom Wireless LAN Devices
--SMP support
wl: dsl_tx_pkt_flush_len=338
wl: norm_wmark_tot=6149, pktc_wmark_tot=2048
wl: passivemode=1
wl: napimode=0
wl0: allocskbmode=1 currallocskbsz=512
Neither SPROM nor OTP has valid image
wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
wl:loading /etc/wlan/bcm6362_map.bin
wl: sprom_update_params NIY!
srom rev:8
wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
wlc_bmac_attach(3293): BpGetWirelessFlags NIY!
wl0: Broadcom BCM435f 802.11 Wireless Controller 6.30.163.23.cpe4.12L08.0
bcm63268-dg: register wl0
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Overriding devID to 0x43a2
wl: passivemode=1
wl: napimode=0
wl1: allocskbmode=1 currallocskbsz=3500
Neither SPROM nor OTP has valid image
wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
wl:loading /etc/wlan/bcm4352_map.bin
wl: sprom_update_params NIY!
srom rev:11
wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32
wl: reading /etc/wlan/bcm4352_nvramvars.bin, file size=32
wlc_bmac_attach(3293): BpGetWirelessFlags NIY!
wl1: Broadcom BCM43a2 802.11 Wireless Controller 6.30.163.23.cpe4.12L08.0
bcm63268-dg: register wl1
[0;36;44mBroadcom Power Management v0.1 Jan 16 2014 12:44:07[0m
CFM Device Driver: Created Successfully
EFM Device Driver: Created Successfully
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2028 buckets, 8112 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
UBI device number 0, total 384 LEBs (48758784 bytes, 46.5 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
UBIFS DBG (pid 637): ubifs_bg_thread: background thread "ubifs_bgt0_0" started, PID 637
UBIFS DBG (pid 635): mount_ubifs: min. I/O unit size: 2048 bytes
UBIFS DBG (pid 635): mount_ubifs: max. write size: 2048 bytes
UBIFS DBG (pid 635): mount_ubifs: LEB size: 126976 bytes (124 KiB)
UBIFS DBG (pid 635): mount_ubifs: data journal heads: 1
UBIFS DBG (pid 635): mount_ubifs: UUID: CF11813B-9EE2-4DFF-95FC-6E39040D3F06
UBIFS DBG (pid 635): mount_ubifs: big_lpt 0
UBIFS DBG (pid 635): mount_ubifs: log LEBs: 3 (3 - 5)
UBIFS DBG (pid 635): mount_ubifs: LPT area LEBs: 2 (6 - 7)
UBIFS DBG (pid 635): mount_ubifs: orphan area LEBs: 2 (8 - 9)
UBIFS DBG (pid 635): mount_ubifs: main area LEBs: 364 (10 - 373)
UBIFS DBG (pid 635): mount_ubifs: index LEBs: 1
UBIFS DBG (pid 635): mount_ubifs: total index bytes: 152 (0 KiB, 0 MiB)
UBIFS DBG (pid 635): mount_ubifs: key hash type: 0
UBIFS DBG (pid 635): mount_ubifs: tree fanout: 8
UBIFS DBG (pid 635): mount_ubifs: reserved GC LEB: 13
UBIFS DBG (pid 635): mount_ubifs: first main LEB: 10
UBIFS DBG (pid 635): mount_ubifs: max. znode size 240
UBIFS DBG (pid 635): mount_ubifs: max. index node size 192
UBIFS DBG (pid 635): mount_ubifs: node sizes: data 48, inode 160, dentry 56
UBIFS DBG (pid 635): mount_ubifs: node sizes: trun 56, sb 4096, master 512
UBIFS DBG (pid 635): mount_ubifs: node sizes: ref 64, cmt. start 32, orph 32
UBIFS DBG (pid 635): mount_ubifs: max. node sizes: data 4144, inode 4256 dentry 312, idx 188
UBIFS DBG (pid 635): mount_ubifs: dead watermark: 2048
UBIFS DBG (pid 635): mount_ubifs: dark watermark: 6144
UBIFS DBG (pid 635): mount_ubifs: LEB overhead: 2656
UBIFS DBG (pid 635): mount_ubifs: max. dark space: 2236416 (2184 KiB, 2 MiB)
UBIFS DBG (pid 635): mount_ubifs: maximum bud bytes: 1904640 (1860 KiB, 1 MiB)
UBIFS DBG (pid 635): mount_ubifs: BG commit bud bytes: 1547520 (1511 KiB, 1 MiB)
UBIFS DBG (pid 635): mount_ubifs: current bud bytes 241664 (236 KiB, 0 MiB)
UBIFS DBG (pid 635): mount_ubifs: max. seq. number: 122
UBIFS DBG (pid 635): mount_ubifs: commit number: 18
mkdir: can't create directory '/var/diagnostic': File exists
act_api service start...
CCFG DB 0 sanity check passed!
extracting CCFG DB 0...
extracting CCFG DB 0 successfully...
Configuration file init successfully
Registered log categories: System|
Log is loaded
Failed to read user header agent seen database!!!
Failed to read known device database!!!
Failed to read OIE database!!!
Failed to read USB device database!!!
mid_core service start...
WAN Daemon start...
DSL Link Monitor start...
Ethernet Link Monitor start...
ntpc start...
ddnsc start...
ddnsc library version 0.1
umts_network_status_poll: enter
UMTS daemon start...
accept_ra and router_solicitations of IPv6 default disabled
mii register 31 is 0x0000
mii register 16 is 0x0000
mii register 20 is 0x0000
mii register 31 is 0x008b
mii register 16 is 0x0700
mii register 20 is 0x7008
mii register 31 is 0x008b
mii register 16 is 0x0700
mii register 20 is 0x7008
Powered down
Powered down
rmmod: can't unload 'nf_nat_pt': unknown symbol in module, or unknown parameter
killall: urlfilterd: no process killed
conntrack v1.0.0 (conntrack-tools): connection tracking table has been emptied.
conntrack v1.0.0 (conntrack-tools): expectation table has been emptied.
_arc_cfg_get(198): Failed to get CCFG section=ip6Firewall, name=ip6firewall_enable !
Failed to initialize ip6tables!!!
ip6tables_cli init: Execution Errors (code -1)
act_api service: shell error(/usr/sbin/util_ip6tables_cli init)!
act_api_sys_act_handler: key-, strategy:0
_arc_cfg_get(198): Failed to get CCFG section=mgmtAccount, name=nologin !
sys_cli_cmd_Run_Action: Got result 0
act_api_wan_act_handler: key-, strategy:0
sys_cli_cmd_Run_Action: Got result 0
WLmngr Daemon is running...
wlc_phy_cal_init_acphy: NOT Implemented
Setting SSID: "wl1-Guest1"
[DBG] EE_WAN_ACTION_IFINIT
Setting SSID: "wl1-Guest2"
Setting SSID: "wl1-Guest3"
Setting SSID: "wl0-Guest1"
[DBG] EE_WAN_ACTION_IFINIT
Setting SSID: "wl0-Guest2"
Setting SSID: "wl0-Guest3"
wlevt_init@158: opened loopback socket 4
wlevt is ready for new msg...
[DBG] EE_WAN_ACTION_IFINIT
[DBG] EE_WAN_ACTION_IFINIT
act_api_xdsl_act_handler: key-, strategy:0
ee_xdsl_main:0,dslinit
[DBG] EE_XDSL_ACTION_INIT
sys_cli_cmd_Run_Action: Got result 0
act_api_xdsl_act_handler: key-, strategy:2
_arc_cfg_get(198): Failed to get CCFG section=xdsl, name=enable !
ee_xdsl_main:0,dslstart
[DBG] EE_XDSL_ACTION_START
BcmAdsl_Initialize=0xC0582C10, g_pFnNotifyCallback=0xC05C1034
BcmAdsl_Initialize(261): BpGetRj11InnerOuterPairGpios NIY
lmemhdr[2]=0x100CE000, pAdslLMem[2]=0x100CE000
pSdramPHY=0xA7FFFFF8, 0x2F5CFFFF 0xFBFF5EA2
*** XfaceOffset: 0x5FF90 => 0x5FF90 ***
*** PhySdramSize got adjusted: 0xEE990 => 0x125350 ***
AdslCoreSharedMemInit: shareMemSize=52365(52368)
AdslCoreHwReset: pLocSbSta=82820000 bkupThreshold=3072
AdslCoreHwReset: AdslOemDataAddr = 0xA7FAD878
BcmXdslCoreSendAfeInfo(2134): BpGetExtAFELDPwrGpio NIY!
***BcmDiagsMgrRegisterClient: 0 ***
bcm63268-dg: register dsl0
devCtl_xtmInitiafapDrv_psmAlloc: fapIdx=1, size: 1600, offset=b0a22be0 bytes remaining 584
lize(177): devCtXTM Init: Ch:0 - 200 rx BDs at 0xb0a22be0
l_getSdramSize NfapDrv_psmAlloc: fapIdx=1, size: 128, offset=b0a23220 bytes remaining 456
IY!
XTM Init: Ch:1 - 16 rx BDs at 0xb0a23220
bcmxtmrt: PTM/ATM Non-Bonding Mode configured in system
sys_cli_cmd_Run_Action: Got result 0
act_api_lan_act_handler: key-, strategy:0
sys_cli_cmd_Run_Action: Got result 0
act_api_lan_act_handler: key-, strategy:2
_arc_cfg_get(198): Failed to get CCFG section=lan#001, name=dhcp4sequential !
_arc_cfg_get(198): Failed to get CCFG section=lan#002, name=dhcp4sequential !
_arc_cfg_get(198): Failed to get CCFG section=lan#003, name=dhcp4sequential !
sys_cli_cmd_Run_Action: Got result 0
System Power Management is now enabled
Host MIPS Clock divider pwrsaving is enabled
DDR Self Refresh pwrsaving is enabled
Ethernet Auto Power Down and Sleep is enabled
Energy Efficient Ethernet is disabled
Multicast Daemon is ready to service...
iptables: No chain/target/match by that name.
eth3 (switch port: 6) Link UP 1000 mbps full duplex
act_api_oie_act_handler: key-, strategy:2
HTTPD: main(1683)
main(1778): I am child for HTTPD SVR 2
main(1778): I am child for HTTPD SVR 0
accept: Bad file descriptor
LAN PORT 4
_arc_cfg_get(198): Failed to get CCFG section=oie, name=eng_mode_tmo !
NDD App: Failed to get variable(ENGINEER_MODE_TIMEOUT)!
_arc_cfg_get(198): Failed to get CCFG section=oie, name=sec_itf !
NDD App: Failed to get variable(SECONDARY_INTERFACE)!
_arc_cfg_get(198): Failed to get CCFG section=oie, name=ukn_dev_tmo !
NDD App: Failed to get variable(UNKNOWN_DEVICE_TIMEOUT)!
init for dnsmasq lease database NIY!
iptables: No chain/target/match by that name.
init for dnsmasq lease database NIY!
iptables: No chain/target/match by that name.
act_api_wlan_service: key-, strategy:131
init for dnsmasq lease database NIY!
sys_cli_cmd_Run_Action: Got result 0
act_api_wlan_service: key-2, strategy:3
[LED] WIFI ON
[LED] WIFI ON
sys_cli_cmd_Run_Action: Got result 0
act_api_wlan_service: key-1, strategy:3
[LED] WIFI ON
[LED] WIFI ON
sys_cli_cmd_Run_Action: Got result 0
mii register 31 is 0x0000
mii register 16 is 0x0000
mii register 20 is 0x0000
mii register 31 is 0x0000
mii register 31 is 0x008b
mii register 16 is 0x0400
mii register 20 is 0x0008
mii register 31 is 0x000b
mii register 31 is 0x008b
mii register 16 is 0x0400
mii register 20 is 0x0008
mii register 31 is 0x000b
mii register 0 is 0x0000
mii register 0 is 0x3000
mii register 0 is 0x3000
Powered up
eth3 (switch port: 6) Link DOWN.
act_api_nas_act_handler: key-, strategy:0
sys_cli_cmd_Run_Action: Got result 0
LAN PORT 4
LAN port 3 DOWN
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
eth3 (switch port: 6) Link UP 1000 mbps full duplex
LAN PORT 4
wl_wscPinGen(4203): read device pin NIY!
NDD App: Time of DHCP fingerprint detection: 0.001941
mcpd_igmp_process_input(259): Invalid pkt rcvd. on interface index: 21 name eth3 br br0
mcpd_igmp_process_input(259): Invalid pkt rcvd. on interface index: 21 name eth3 br br0
Driver 'sd' needs updating - please use bus_type methods
act_api_nas_act_handler: key-, strategy:2
Password for 'user' changed
/opt/arc_middle/oie/ip_changed.sh: line 26: /usr/sbin/sh_ip6tables_modify_ip.sh: not found
WPS Device PIN = 74857210
Setting SSID: "5GHz-EE-pm2mke"
Current SSID: "wl1-Guest1"
Current SSID: "wl1-Guest2"
Current SSID: "wl1-Guest3"
sys_cli_cmd_Run_Action: Got result 0
transit LED power to state ready
LLTD daemon is ready to service
insmod: can't insert '/opt/arc_p8021ag.ko': File exists
insmod: can't insert '/opt/arc_p8023ah.ko': File exists
EAP daemon is ready to service
NAS daemon is ready to service
acs_retrieve_config: flags 0x8
Trigger UP TR069 Module.
Key id=0x61090046
Message Q 0x0 create
fread_config_b(309): get FirstUseDate 0000-00-00T00:00:00
fread_config_b(323): get URL https://arcadyan.cwmp.eu:443/
fread_config_b(337): get username 9C-80-DF-3C-0C-50
fread_config_b(351): get password EE-pm2mke
fread_config_b(364): get periodic inform enable 1
fread_config_b(377): get periodic inform interval 86400
fread_config_b(391): get periodic inform time 0001-01-01T00:00:00
fread_config_b(405): get parameter key
fread_config_b(420): get ConnReqURL
fread_config_b(435): get ConnReq username username
fread_config_b(450): get ConnReq password password
fread_config_b(463): get tr69_m_reboot 0
fread_config_b(475): get TransferFaultCode 0
fread_config_b(488): get CommandKey
fread_config_b(501): get TransferStartTime
fread_config_b(514): get TransferEndTime
size InternetGatewayDevice_T = 3360
Register InternetGatewayDevice Successful
size LANDevice_T[1] = 85572
Register LANDevice Successful
size WANDevice_T[1] = 11888
size PortMapping_T[20] = 3920
[TR098] Register WANDevice Successful <Tr69Nodes_SetupWANDevice [4967]>
size IPPingDiagnostics_T = 584
size DownloadDiagnostics_T = 724
size UploadDiagnostics_T = 724
size UDPEchoConfig_T = 380
Register IPPingDiagnostics Successful
size Layer3Forwarding_T = 7700
Register function 0x2ac40018 to TR69_MSG_NONE!
Register Layer3Forwarding Successful
[TR098] mapi_wan_get_active_wan error <getActiveWanData [2703]>
[TR098] No active WAN <SyncWANPPPConnectionFunc [4158]>
[TR098] mapi_wan_get_active_wan error <getActiveWanData [2703]>
[TR098] No active WAN <SyncWANIPConnectionFunc [3885]>
[TR098] mapi_wan_get_active_wan error <getActiveWanData [2703]>
[TR098] No active WAN <SyncWANConnectionDeviceFunc [3367]>
[TR098] unknown dsl channel type: 0 <SyncWANDSLInterfaceConfigFunc [3106]>
[TR098] signal = -1 <SyncWANUMTSInterfaceConfigFunc [2997]>
SyncWANCommonInterfaceConfigFunc: cannot get connection
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 br2
TR69Nodes_GetLANIfNodes: ENTRY ifName br2
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 br1
TR69Nodes_GetLANIfNodes: ENTRY ifName br1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
TR69Nodes_GetLANIfNodes: ENTRY ifName br0
*****SyncAllNode time = 1371678*****
[Init_SSLClient] Certificate_Id=0, nConnectProtocol=6
[sslc_conf_init] cert_array->verify_peer=0
[1026] [sslc_conf_init] ssl client info:
[1026] PrivateKey=
[1026] MyCertificate=
[1026] CaCertificate=
[1026] SSL_method=30
[1026] verify_mode=0
[1026] cipher_suites=ADH:SHA1:HIGH:EXP
[1026] tftp_server_ip=140.92.61.131
[1026] fn_myCerttificate=ServCert.pem
[1026] fn_privateKey=PrivKey.pem
[1026] fn_caCertificate=CaCert.pem
[1026] sslc_conf_init> ssl client info end:
System Start with Normal Phase
create_debugger_socket: listen at port:6969
VERIFY_TR069::Tr69_Init()::Set BOOTSTRAP or BOOT Inform Message
FirstUseDate:0000-00-00T00:00:00
Run Tr69_Task task id=0x402
Run Tr69_TimerTask task id=0x803
[1026] [sslc_conf_init] pCtx=0x4e05e0 in ssld_conf_init
[1026] [sslc_ctx_reset_cert] re-LoadCACertificate( 3rdCA ) ok!!
[1026] [sslc_ctx_reset_cert] re-LoadCACertificate( 2ndCA ) ok!!
[1026] [sslc_ctx_reset_cert] re-LoadCACertificate( 1stCA ) ok!![sslc_ctx_reset_cert] this is pkcs12 type certificate
LoadServerCertAndKeyFromPKCS12Format> MAC verified OK
LoadServerCertAndKeyFromPKCS12Format> PKCS12_parse() return pkey=0x4e6390, x509=0x4e50e8
data=30:82:2:5b
data=4c:4a:7a:2b
LoadServerCertAndKeyFromPKCS12Format> out_len=1142
[1026] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
[1026] [sslc_conf_init] sslc_conf_init() ok
[Init_SSLClient] g_Client_Cert_Array[0]=0x4de170
Status: disconnected
transit LED bb to state dsl_down
[LED] DSL DOWN
acs_select_chspec: 0xe22a
waitpid: Interrupted system call
wps_1905_init:77 msgqueue created :32769
WPS daemon is ready to service
WPS daemon is shutting down
Setting SSID: "EE-pm2mke"
Current SSID: "wl0-Guest1"
Current SSID: "wl0-Guest2"
Current SSID: "wl0-Guest3"
LLTD daemon is ready to service
EAP daemon is ready to service
NAS daemon is ready to service
acs_retrieve_config: flags 0x8
acs_select_chspec: 0xe12a
acs_retrieve_config: flags 0x8
acs_select_chspec: 0x100b
Success
Success
Success
Success
Success
Success
Success
Success
Success
Keep your eyes open - I've just finished shooting my "teardown" of Bright Box 2, and I shall post it here + other pertinent and interesting info, very soon indeed
Edited by glossywhite (Tue 15-Jul-14 19:19:21)
