ADSL2+ or LLU

Hi, there is something I would ask you abot guys.
Well, i have just moved to my place. On my old place i was with Be Unlt. as a LLU provider, and i was getting nice 16 Mbps, i have moved their service with me and now I have only 4 Mbps (4096 Kbps exactly !!!). Werether i check for ADSL MAX or ADSL2+ on my line it shows I should get 5.5Mbps over Max, and over 7Mbps on ADSL2+. Is it possible that over ADSL services i can get more than on LLU?
Is it coincidence that 4096Kbps? May it be that Be* have set some limit on my line?

That's a bit odd.

Can you post your line stats from your router? If you're using the Bebox in default config, try http://192.168.1.254/cgi/b/dsl/dt/?ce=1&be=0&l0=1&l1=0

Edited by deleted (Sat 28-Mar-09 10:21:18)

The online checkers are just estimators based on what can be incorrect records.

To see if the line is performing reasonably you need to look at the data from the modem, i.e. sync speed, attenuation and noise margin http://www.kitz.co.uk/adsl/frogstats.php shows how to get these

Uptime: 0 days, 14:06:50
Modulation: G.992.5 Annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,226 / 3,995
Data Transferred (Sent/Received) [MB/GB]: 104.77 / 1.55
Output Power (Up/Down) [dBm]: 12.0 / 17.0
Line Attenuation (Up/Down) [dB]: 24.0 / 45.0
SN Margin (Up/Down) [dB]: 6.5 / 6.5
Vendor ID (Local/Remote): TMMB / µ
Loss of Framing (Local/Remote): 296 / 0
Loss of Signal (Local/Remote): 74 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 36,861 / 0
FEC Errors (Up/Down): 0 / 8,077,746
CRC Errors (Up/Down): 98 / 255
HEC Errors (Up/Down): 35 / 187

I have these. Couldn't find Sync Speed

In reply to a post by hedeon:

I have these. Couldn't find Sync Speed

3995 kbps.
Pretty poor for a 45dB line.
Have you checked in the 'test' socket INSIDE the BT master socket, as your internal phone wiring may be bringing the connection speed down (you should get around 6-8Mbps from 45dB).

But this is odd.
INSIDE I'm geting 6.6 Mbps, but in same socket, but OUTSIDE im geting 4Mbps.
Whats wrong?

Your internal extension wiring is introducing noise. Taking the faceplate off disconnects it.
Try removing the ring wire...

In reply to a post by BatBoy:

Your internal extension wiring is introducing noise. Taking the faceplate off disconnects it.
Try removing the ring wire...

To the OP - as in this FAQ

Ring wire? What is that?
I was thinking, as I am geting a same speed in all sockets as in BT main one, so all internal wireing will be ok. Speeds change when i'm connecting to internal one (INSIDE), so can indicate a problem with faceplate of Main BT socket. I don't know whats a ring wire, but if that will not help is it possible to replace a whole face plate?

See my reply to Batboy. Just doing the master socket should fix the extensions as well.

Edited by RobertoS (Sat 28-Mar-09 11:44:18)