I'm struggling to find the information you have asked for - I've only just discovered how to get any of my internet statistics.

I have found "actual data transfer speed 36mpbs"; I hope that is the figure you need.

The rest of the statistics I sent in my previous two posts are almost unchanged: the only notable changes being "noise margin (down/up) 15.5db/16db"; "loss of framing 21"; "loss of signal 4"; "FEC errors 57869/2"; "CRC Errors "2048/2147480000"; and "Error Seconds (local) 2863".

Recently when I have used Speedtest on different days I have had 1.94mbs download and 0.38 upload on both occasions.

Afraid that isn't the speed figure either. Somewhere similar to where you got the other stats (such as the noise margin) there should be 2 figures that probably say something like "Downstream speed 2152Kbps, Upstream 484Kbps" or similar. Those are the numbers we need to be able to put those others in perspective.

Thanks Ian72.

The downstream is 2464 kbps
and
the upstream is 448 kbps.

Me? You should be addressing this to OP. I already told him this in the post you are replying to.

You should follow your own advice to BatBoy recently to follow the thread more closely.

Please also post your results from http://speedtester.bt.com/

Helpful if you copy & paste your full router stats en bloc, so we see them all together in context.

I hope this gives the details:

http://192.168.1.254/bb_dsl.lp?be=1&l0=2&l1=2&l2=1&dt=1

I will close down all sites and attempt to use the BT speedtester (I haven't used that speedtester before).

I'm struggling to work out how to copy the BT speedtest results. I hope this is what is needed



FAQ


Test1 comprises of two tests

1. Best Effort Test: -provides background information.

Download Speed
1609 Kbps

0 Kbps 2000 Kbps
Max Achievable Speed

Download speedachieved during the test was - 1609 Kbps
For your connection, the acceptable range of speedsis 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :2464 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 11.9:26.65:61.46 (SBE:NBE:PBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.

The results of this test will vary depending on the way your ISP has decided to use these traffic classes.

2. Upstream Test: -provides background information.

Upload Speed
335 Kbps

0 Kbps 448 Kbps
Max Achievable Speed

>Upload speed achieved during the test was - 335 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 448 Kbps


We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

Please visit FAQ section if you are unable To understand the test results.






Notes:
The Download Speed is the average rate that was achieved during this test.

Notes:
Your line is configured to the maximum rate that it can support or at your chosen fixed rate, this is known as the line rate and would be viewed through your CPE software or in your router configuration.

Your IP profile is always less than the line rate and is normal on any network.

The Upstream Test rate figure quoted will always be smaller than the assured rate profile. This is because in order for the throughput to reach its destination, it requires an overhead which explains the difference between the two.


Notes:
If your download speed lies in this range then your connection seems to be working fine.

Notes:
The Download Speed is the average rate that was achieved during this test.

Notes:
Your line is configured to the maximum rate that it can support or at your chosen fixed rate, this is known as the line rate and would be viewed through your CPE software or in your router configuration.

Your IP profile is always less than the line rate and is normal on any network.

In reply to a post by oldperson:

http://192.168.1.254/bb_dsl.lp?be=1&l0=2&l1=2&l2=1&dt=1

I'm afraid you hope wrong! I can't do that! You have given me a link to your private local network which I cannot access. From my POV it is just an IP into my local network.

It is simplest if you just copy & paste en bloc.

This is a learning curve for me. I hope again that his works.

ADSLVPNDynamic DNSADSL line status
Connection information
Line state Connected
Connection time 0 days, 16:04:31
Downstream 2,464 Kbps
Upstream 448 Kbps


ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.8 dB / 16.0 dB
Line attenuation (Down/Up) 53.0 dB / 31.5 dB
Output power (Down/Up) 17.4 dBm / 12.3 dBm
Loss of Framing (Local) 21
Loss of Signal (Local) 4
Loss of Power (Local) 0
FEC Errors (Down/Up) 444287 / 2
CRC Errors (Down/Up) 5595 / 2147480000
HEC Errors (Down/Up) nil / 0
Error Seconds (Local) 3373

Hide Details

Whilst the speedtest isn't superb it's not that far off for the connection and IP Profile. You could possibly squeeze a little more out using Sky LLU but any other ISP is likely to give you similar overall performance at best. Plusnet may well see you getting slower speeds on some things and O2 is a non-starter as you don't have their LLU available.

Personally I would say your only hope of faster at this point is Sky and that will only give a max of about 2200 Kbps if you are really lucky. Sorry, but I think your options are limited.