Are my stats okay ?

Hi there

Are the stats good for my line, the reason i ask,is i see i have a few error's, is this anything to be concerned about ? many thanks

ADSL Line Status
Connection information
Line state: Connected
Connection time: 2 days, 19:49:02
Downstream: 7,744 Kbps
Upstream: 448 Kbps

ADSL settings

VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 7.1 dB / 17.0 dB
Line attenuation (Down/Up): 37.0 dB / 22.5 dB
Output power (Down/Up): 20.2 dBm / 12.4 dBm
FEC Events (Down/Up): 10626871 / 30
CRC Events (Down/Up): 665 / 44
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
HEC Errors (Down/Up): 14592 / 37
Error Seconds (Local/Remote): 0 / 0

Edited by deleted (Sat 29-Nov-14 13:29:09)

Speeds are good, FECs somewhat high but ES are 0 and no discons.

What issues, if any, are you experiencing?

,Hi thank you for your input, i am not experiencing an problems at the moment , what do FECs /ES error mean? many thanks

Router Line Stats - Errors

Fec is in simple terms errors that Interleaving were able to correct

I would say of broadband and errors in general that if you are not getting errors then you are not trying hard enough.

that is to say that you want you broadband running at a speed that gives some errors that can be corrected. if you were getting no errors then it would be too slow. corrected errors are just it working how it should.

in respect of your numbers of an attenuation of 37dB you might hope for something in the region of 10Mb. every line is different of course but you might want to run the usual checks, filters placed correctly, ring wire removed...

In reply to a post by flagpole:

in respect of your numbers of an attenuation of 37dB you might hope for something in the region of 10Mb.

Not on ADSL Max (G.DMT) you won't!

Connection Speed 9816 kbps 1015 kbps
Line Attenuation 35 db 9.5 db
Noise Margin 6 db 7 db

Your sats are similar to mine but i am on adsl2