Port forwading on Technicolor TG582n

Hi
I'm trying to assign a user defined game/application to a camera. I'm getting a message:

The port configuration of the game or application conflicts with an already assigned game & application. Assigning this game or application is not possible.

However there are no games or applications assigned.

I've reset the router twice.

Any help would be welcome.
Thanks

Do you have any port forwarding or DMZ settings in place? You say you have reset the router do you mean a reset to factory default settings?

In reply to a post by ian72:

Do you have any port forwarding or DMZ settings in place? You say you have reset the router do you mean a reset to factory default settings?

Hi
I made a new game for the camera. Then I attempted to assign that game to the camera's IP address. Then I got the error message. No other port forwarding in place. I did a hard reset with the reset button and a reset to factory in the Technicolor home page. Thanks.

What are the exact settings you setup when you created the "game or application"?

Normally the message you are getting means that the service is already being port forwarded to somewhere else (at least on the routers I've used in the past - I have no direct experience of the Technicolor but the manual looks like it should be relatively straight forward).

Range 7777 to 7777 forwarded to 7777. I called this camera.

Then I tried to assign "camera" to the camera's IP address the first ***.***.* is the same as the router's first 7 characters.

Well it would appear it is just 7777 that is assigned to something. Not sure how to find out what.

OK, suspect this is UPNP already opening the port.

This post gives some information on a workaround for this that should hopefully fix it for you.

Thanks but that didn't help. I have another camera that uses port 7778 so I'll use that. Thanks for your help.