Nice One

Another on the Unifi bandwagon

1 x Huawei MT992 (located at front door)
24 port patch (4 ports per room and 2 at front door)
1 x Unifi USG3
1 x Unifi 24 port managed switch (not POE)
1 x Netgear JGS254 24 port unmanaged switch
4 x POE injectors (one for modem at front door)
3 x Unifi AC lite AP's (Front, middle and back of house)
2 x Raspberry Pi (1 x running Unifi controller, 1 x Environmental monitor and UPS controller)
1 x Swann CCTV system
1 x Synology RS816 NAS (16TB)
1 x APC SMT 750VA UPS

Will try and pop a pic up later but as it's all crammed in/around a 6U cab it's a bit of a mess (and in my attic!!)

Next step is a second cab and split things between the 2 units - UPS, router, CCTV with a new POE switch (prob the Unifi 16 port-150W) and extra patch panel in one and the NAS, RPi's, main switch and patch panel in the other. Hindsight is always 20:20 and should have bought a bigger rack at day one, but due to space and noise I wanted to keep it all away from the main bedrooms...ho hum we live and learn

Very nice setup you have there. Can Raspberry pi also monitor the temperature or does it need an add-on?

Cheers...wife will probably lynch me if she new the total cost

Pics of rack as currently is..(hope links work)

https://www.dropbox.com/s/tbkf7h9jn14lz7o/Rack%201%2...

https://www.dropbox.com/s/6f745ccsjq6l2xv/Rack%201%2...

As for temp monitoring on the pi....sensor connected to the GPIO...

https://thepihut.com/products/waterproof-ds18b20-sen...

Simple script to allow checking of the temps.

Initially I also had a relay to mange some cooling fans but have scrapped this and the UPS now manages this itself (AP9631 card). The PI just monitors the room temps.

Edited by NGDragon (Tue 04-Dec-18 19:18:05)