Interesting, day 13 and another night time resync around 1.05am. Not much appears to have changed.

NEW STATS

DSL uptime:0 days,07 Hours54 Mins38 Secs
Data rate:19.999 Mbps / 79.241 Mbps
Maximum data rate:24.019 Mbps / 80.245 Mbps
Noise margin:15.2 / 3.3
Line attenuation:7.3 / 13.0
Signal attenuation:7.2 / 14.4
VLAN id:101
Upstream error control:Off
Downstream error control:Off


Eclipse have credited my account with the cost of the cease fee, so all good there.

Maximum data rate:24.019 Mbps / 80.245 Mbps

Line attenuation:7.3 / 13.0

That's pretty good for max rate 80Mbps for line attenuation

Mine below:

xdslctl info --stats
xdslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason: 0
Last initialization procedure status: 0
Max: Upstream rate = 24514 Kbps, Downstream rate = 82673 Kbps
Bearer: 0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode(0x0)
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 5.9 14.5
Attn(dB): 11.8 0.0
Pwr(dBm): 12.5 1.7
Interleave depth: 16 1
INP: 48.00 0
G.INP: Enabled Not enabled
Vectoring status: 5 (VECT_UNCONFIGURED)

Bearer 0
INP: 48.00 0.00
INPRein: 0.00 0.00
delay: 0 0
PER: 0.00 3.98
OR: 0.01 64.22
AgR: 80614.82 20063.54

Bearer 1
INP: 4.00 0.00
INPRein: 4.00 0.00
delay: 3 0
PER: 16.06 0.01
OR: 95.62 0.01
AgR: 95.62 0.01

Bitswap: 18/18 11/11

Since Link time = 7 days 8 hours 47 min 21 sec
FEC: 7853 1290
CRC: 0 446
ES: 0 349
SES: 0 0
UAS: 0 0
LOS: 0 0
LOF: 0 0
LOM: 0 0
Retr: 0
HostInitRetr: 0
FastRetr: 0
FailedRetr: 0
FailedFastRetr: 0

Hub firmware update and resync overnight

PREVIOUS

Firmware version: v0.15.00.06145-BT
Firmware updated: unknown

NEW

Firmware version:v0.17.01.12312-BT
Firmware updated:Mon Jul 13 01:05:40 2020
Board version:R01
GUI version:1.56 15_02_2019
DSL uptime:0 days,06 Hours25 Mins56 Secs
Data rate:19.999 Mbps / 79.195 Mbps
Maximum data rate:23.641 Mbps / 80.024 Mbps
Noise margin:15.0 / 3.1
Line attenuation:7.2 / 13.0
Signal attenuation:7.2 / 14.6
VLAN id:101
Upstream error control:Off
Downstream error control:Off


Everything looks settled on the sync front, around 79.2Mb @ 3dB.

Edited by sparky_paul (Mon 13-Jul-20 09:01:49)

Several days ago, thinking it would be fairly safe to do so now after 3 weeks activated, I needed to unplug the router to re-route a few cables.

NEW STATS

Data rate:19.999 Mbps / 79.998 Mbps
Maximum data rate:24.055 Mbps / 81.213 Mbps
Noise margin:15.2 / 3.3
Line attenuation:7.2 / 13.1
Signal attenuation:7.2 / 14.7
VLAN id:101
Upstream error control:Off
Downstream error control:Off

Connection has been rock solid at 80/20, no disconnects, SNR drifts between 3.2 - 3.4.

Happy days!

Excellent.

Sorting out cables could be what improved it.

Pretty good stats as re-route short cable does make a lots difference! Now enjoy your full 80/20 for long while!

In reply to a post by adslmax:

Pretty good stats as re-route short cable does make a lots difference! Now enjoy your full 80/20 for long while!

Lots of short cables can make things worse. Particularly if mains power and signal cables are parallel and very close to each other.

I thought short cable from master socket to modem will be better overall line attenuation with max data rate? Longest cable will reduced data rate speed.

No change to any cables, just a bit of untangling. I moved the position of the router a bit when I changed over to the BT hub, and plugged it in where it wouldn't be inadvertently switched off. Some of the cables needed sorting out.

SNR has drifted down to 3dB over the last couple of days, but still seems solid enough.

BT sent me a message yesterday confirming the £100 reward card was being posted out, I had to contact them on the community forum to get that sorted out. £25.50 cashback on TCB confirmed today too. It's all rolling in...

Depends on cable type.