In reply to a post by sparky_paul:

Thanks for that, I can see your sync improved considerably. Hopefully, I will see some improvement too.

This is all you can see on the Smart Hub 2 "Technical log" (current stats now)

DSL uptime:0 days,20 Hours24 Mins25 Secs
Data rate:19.999 Mbps / 60.235 Mbps
Maximum data rate:26.980 Mbps / 73.235 Mbps
Noise margin:15.9 / 6.3
Line attenuation:6.9 / 13.4
Signal attenuation:6.9 / 14.8
VLAN id:101
Upstream error control:Off
Downstream error control:Off

The rest of it is not relevent to the connection.

Yeah best to leave it alone, let DLM do it own things first will apply G.INP if your fibre cabinet are huawei, after that, will try apply SNR at 5dB, 4dB and 3dB to stable your line for maximum max rate.

Cab is an AIO, combined PCP/FTTC - Huawei according to codelook.

I think you'll end up very close to the full 80/20 once the 3dB target SnR is reached.

In reply to a post by sparky_paul:

Cab is an AIO, combined PCP/FTTC - Huawei according to codelook.

That's good to hear. Wait for G.INP then target SNR 3dB. Do not reboot or mess with hub router, let the DLM do it own things.

I am using Zyxel XMG 3927-B50A VDSL2/G.fast AC2400Mbps wireless router for my FTTC 80/20.

In reply to a post by jpm:

I think you'll end up very close to the full 80/20 once the 3dB target SnR is reached.

Should be!

Thanks all, that's made me a bit more hopeful

I'll keep thread updated if anything changes, I always find it useful to hear other people experiences.

To put to bed an earlier query, I can confirm that WLR line rental / BTw ADSL to BT retail FTTC did NOT produce any open orders on the BTw checker, in my case.

Was told by openreach email that new dsl checker are no longer to show open order. Only the ISP can verify this to customer on BTw system. Meaning no chance for customer to check via new dsl checker anymore.

One other odd thing I noticed about the BTw checker.

After I ordered FTTC, the checker showed a new 'Last test date' of 10-06-2020, presumably an automated line check as part of the ordering process.

If I look now, that's gone - and the LTD has reverted back to the previous date 28-04-2020.

Aaaaargh! POWER CUT!

Reconnected at 56Mb and SNR up to 7.6dB

If it one off power cut (it won't affect DLM) best leave it alone but if the power cut kept going off and on continue. Power down modem and unplugged the socket until the power cut has restored fully solid then switch on modem.

Edited by adslmax (Sun 28-Jun-20 13:35:35)