General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | [5] | (show all)   Print Thread
Standard User DFScale
(experienced) Fri 13-Nov-26 07:33:31
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
OK, if it is SOGEA, it will use the old wires, so no benefit to my solution.

Instead get voip with a temporary number [I should have suggested this anyway] sand get the voip supplier to acquire your old number, the moment you have SOGEA.
Standard User Taras
(eat-sleep-adslguide) Fri 13-Nov-26 08:18:25
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
Thanks for the advice. In fact FTTP isn’t available at my place. Would that change your suggestion on sequencing at all?


your btwholesale profile says otherwise. Yes there is Line of sight issues, but in most cases it is resolved.
Standard User parklife
(newbie) Fri 13-Nov-26 18:21:47
Print Post

Re: Error in openreach database, how to get fixed?


[re: DFScale] [link to this post]
 
Thank you for the thoughts on this question. I think I will take the approach that you suggest. 🙂


Register (or login) on our website and you will not see this ad.

Standard User parklife
(newbie) Fri 13-Nov-26 18:30:22
Print Post

Re: Error in openreach database, how to get fixed?


[re: Taras] [link to this post]
 
Thank you Taras. The fact that my profile incorrectly says it is available when it is not is exactly the problem I have. Six of the eight houses in the terrace - including ones on both sides - are (correctly) listed as FTTP not available. And the view of the four engineers that came out on three separate occasions was that - being around a right angle bend to the nearest pole with FTTP - there was no way for them to connect up my place.
Hopefully Openreach, will make FTTP available in due course. It will be interesting to see how they do it.
Pages in this thread: 1 | 2 | 3 | 4 | [5] | (show all)   Print Thread

Jump to