General Discussion
  >> General Broadband Chatter


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | 2 | 3 | 4 | 5 | (show all)   Print Thread
Standard User slothenlyfabric
(newbie) Thu 21-Mar-24 11:57:09
Print Post

Error in openreach database, how to get fixed?


[link to this post]
 
There is an error in the openreach data for my line. The result is that I'm trapped with my current broadband provider (Shell) ...and when my initial contract term expires the price will go through the roof.

I'd like to change provider - anywhere really, not properly compared yet - but on all the provider sites I fail the availability check. They either tell me nothing is available, offer me slow ADSL, or a 4G service.

I can definitely get FTTC. I am using it now. And on the bt checker VDSL is available for my neighbours on either side.

But on the BT wholesale DSL check for myself:
- I can't get a result with my phone number
- using my address, I get results but it shows the wrong exchange. FWIW the exchange it shows covers a street with the same name as mine. The availability checks I get back are consistent with this exchange being the source of the data. Talktalk (but noone else) have also told me I am on a stop sell exchange. I'm not, but the one it shows is.

It didn't used to be like this, so something has changed in the last 18 months.

Is there a way to get this amended? Do I need to go via shell or is there a way to go direct to openreach?
Standard User adslmax
(eat-sleep-adslguide) Thu 21-Mar-24 14:47:50
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
Email Openreach CEO [removed by tbb]

Edited by seb (Mon 02-Feb-26 21:41:16)

Standard User BLaZiNgSPEED
(committed) Thu 21-Mar-24 15:18:40
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
What does it say for the WBC SOGEA Availability Date ? It should show Available.
For WBC FTTC Availability Date it shows unavailable for everyone, this is because Analogue phone service is being retired and replaced with Digital Voice. That DV service is called SOGEA for FTTC. So you should still be able to order FTTC under SOGEA.

You don't get any results for the phone number because once again that phone is being searched as Digital Voice and cannot show any service or speed stats.

You are going through a WLR wholesale line rental stop sell. It even shows this at the bottom of the checker "If shown at FTTP or SOGEA premises,ADSL, ADSL2+ and SOADSL are not available to order due to WLR Withdrawal stop sell rules."

By December 2025 Analogue phone service will retire and you can only get FTTC with Digital Voice. That's why it is showing FTTC is unavailable as it is being replaced as SOGEA. I know this is causing major confusion for many, this is not an error.


Register (or login) on our website and you will not see this ad.

Standard User jpm
(fountain of knowledge) Thu 21-Mar-24 15:40:52
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
Complete the form here about your neighbours being able to get fibre but you can't.

https://www.openreach.com/forms/fibre-broadband-avai...
Standard User slothenlyfabric
(newbie) Thu 21-Mar-24 15:54:03
Print Post

Re: Error in openreach database, how to get fixed?


[re: BLaZiNgSPEED] [link to this post]
 
Thanks. I am open to the possibility I'm confused, but I don't think this is the explanation


For my house, there are no VDSL (or gfast) rows in the table at all. And it shows the wrong exchange (and cabinet) across the top.

For my neighbours either side under WBC SOGEA Availability Date it says "Available". It shows the correct exchange and cabinet across the top.

If I do an availability check on an ISP site for my neighbours' addresses, it offers me the 2 fibre (to the cabinet) products, including the one I am on now. But if I do an availability check on an ISP site for my own address, it offers me nothing (basically - BT offer me 4G, one offered me an ADSL product).

I'm really convinced that the data I am seeing for my house is for the wrong exchange and if this can be corrected I'll see accurate availability data.

But until that changes I'll soon start paying a premium of almost £20 extra a month, trapped in a rip-off run on contract when I should be able to just change.

I'm not ruling out emailing openreach leadership directly, but surely there is an established process to get a database error like this corrected?
Standard User slothenlyfabric
(newbie) Thu 21-Mar-24 16:06:24
Print Post

Re: Error in openreach database, how to get fixed?


[re: jpm] [link to this post]
 
I will try that.
However...
...*that* availability checker gives me accurate information! But hopefully it goes to the right people to fix the other problem.
Standard User Taras
(eat-sleep-adslguide) Thu 21-Mar-24 16:36:26
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
is there more than one entry for your property in that list ?
Standard User Taras
(eat-sleep-adslguide) Thu 21-Mar-24 16:39:42
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
In reply to a post by slothenlyfabric:
but surely there is an established process to get a database error like this corrected?


The link, that jpm gave you will also do the trick!
Standard User Taras
(eat-sleep-adslguide) Thu 21-Mar-24 16:40:19
Print Post

Re: Error in openreach database, how to get fixed?


[re: adslmax] [link to this post]
 
why?
Standard User slothenlyfabric
(newbie) Thu 21-Mar-24 16:52:37
Print Post

Re: Error in openreach database, how to get fixed?


[re: Taras] [link to this post]
 
Yes, there are indeed two entries for the house. They express the same address is a slightly different fashion.
But FWIW I am pretty confident which is which (one has never worked for telecoms stuff and gives a "we cannot determine availability" error, the other is the address on the bill and the entry on that list we've always used, that's the one which actually has data, albeit wrong.)
Standard User Taras
(eat-sleep-adslguide) Thu 21-Mar-24 16:54:12
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
in that case use JPM's link, on the form and explain whats happened and they should clear up the urpn data
Standard User Iniltous
(member) Thu 21-Mar-24 17:04:54
Print Post

Re: Error in openreach database, how to get fixed?


[re: Taras] [link to this post]
 
If there is an error on the address database then your current provider ( Shell ) need to advise Openreach via an ORDI request to align the address information with what is held by the Royal Mail , that should allow other ISP to locate your address correctly and initiate the migration process , however , presumably at some point Shell ( in the past ) managed to navigate around the address an anomaly, and raised an order to get you provided with FTTC , migrating from another ISP , , there is no reason why an alternative ISP cannot also identify the appropriate address and arrange a migration, provided you interact with them in the appropriate way .

Obviously if you feel the address data should be correct , ( and it should be ) it’s Shell that need to arrange this via Openreach with the ORDI request ( Openreach Data Integrity )
FWIW , your phone number , unless provided by BTw is not going to a provide result on the BTw checker and Shell are not BTw

Edited by Iniltous (Thu 21-Mar-24 17:13:59)

Standard User slothenlyfabric
(newbie) Thu 21-Mar-24 17:24:51
Print Post

Re: Error in openreach database, how to get fixed?


[re: Iniltous] [link to this post]
 
The anomaly is new. So no previous provider has had to navigate it.

I will see if Shell can help. I have already been in touch and it's not promising. Are they obliged to help? (After all, it's obvious that my motivation for this is to leave them...)

Strictly speaking the address data is correct . It's the exchange it's (purportedly) attached to which is wrong, Is that still fixable via an ORDI request? (thanks for the term I need to use, by the way!)

(I realised that was a likely explanation for the phone number search failing, I'm OK with that)
Standard User pluralist
(knowledge is power) Fri 22-Mar-24 01:06:11
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
This might be causing some confusion, given your two slightly different addresses

Capitalism is an obsession with money. Socialism is an obsession with other people's money. Konstantin Kisin

Connections: Pixel 6a on Three 4+ (LTE)/5G, OnePlus 8 Pro on EE in reserve. At home Three Mobile, with (Three)ZTE MC888 router giving 5G most of the time..
Administrator seb
(founder) Fri 22-Mar-24 19:12:06
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
If you e-mail [email protected] with your full details we may be able to do something. No promises.
Link to this thread and also give details of why the issue is there (re addresses)... and what the error is?

seb

Sebastien Lahtinen
[email protected]

The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User slothenlyfabric
(newbie) Fri 29-Mar-24 13:07:17
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
Hi all, thanks for all these suggestions.
The issue is now fixed.

The link provided by @jpm prompted openreach to get in touch with me directly, and fix it.
My provider (shell) also got involved, but in the end were a day behind openreach.
Standard User Yipykayay
(member) Fri 10-May-24 19:43:51
Print Post

Re: Error in openreach database, how to get fixed?


[re: slothenlyfabric] [link to this post]
 
I had exactly the same problem as you and had no idea why or what to do about it. I even thought it was my supplier (BT) playing silly beggers and somehow blocking me from seeing other providers deals !!!

I found this thread, completed the form and had the issue resolved within a couple of days. So thank you for the original post, thanks to all who contributed to the thread and thanks Openreach for the swift response and resolution. smile
Standard User parklife
(newbie) Wed 11-Nov-26 21:18:06
Print Post

Re: Error in openreach database, how to get fixed?


[re: seb] [link to this post]
 
My issue is a bit different.
The availability checker says that FTTP is available at my place but with possible line of sight issues.
In fact the "possible line of sight issue" refers to a telephone pole about 90 metres away and around a corner. So absolutely no line of sight at all! (This is the telephone pole that the app which Openreach engineers have shows my house can get FTTP from. 🤔) On the other hand the telephone pole my house is currently connected to is close (about 15 metres) with a (short) direct line of sight. But it has no Openreach FTTP (and a "deep crack"). Since the database says FTTP is available no ISP seems able to offer me SOGEA/ SOTAP/ FTTC, even though it appears to be available. My current ISP is expensive and I want to switch. They say they can't fix the problem on the openreach database. I have spent over 25 hours on the phone to several ISPs to try and get this resolved so I can switch ISP. I tried filling in the Openreach form to report an error, but they responded that I needed to get my ISP to sort it out. I feel like I'm in an impossible situation. 😖
[The nearby pole does have Hyperoptic equipment on it, but neighbours say they are not very reliable around here and I'd prefer an ISP that doesn't use CGNAT for better VOIP.]
I have tried completing the Openreach form again but am not optimistic.
I'd very much appreciate any advice on what I can do to resolve the situation.
Standard User Pheasant
(eat-sleep-adslguide) Wed 11-Nov-26 22:05:07
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
Have you tried ordering an FTTP service?
Standard User parklife
(newbie) Wed 11-Nov-26 22:18:13
Print Post

Re: Error in openreach database, how to get fixed?


[re: Pheasant] [link to this post]
 
Thanks for the reply.
Yes, I tried ordering FTTP. Openreach missed two dates for installing fibre on the local pole and engineers turned up anticipating the installation but it hadn't happened - meaning I had to inconveniently stay at home for no benefit. After two and half months and a lot of issues with my existing ISP I ended up cancelling. The period included a 10 day service outage - following, I think, an ISP error, a lot of time on the phone to the ISP and a lot of head scratching from the ISP (including their second-line support/"experts") on what had gone wrong.
Perhaps I should have hung on longer but I lost confidence following the outage, missed deadlines and nugatory engineer visits.

Edited by parklife (Wed 11-Nov-26 22:19:23)

Standard User Pheasant
(eat-sleep-adslguide) Wed 11-Nov-26 22:43:16
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
So you cancelled the FTTP install or they cancelled? Who was / is the ISP?
Standard User PCJM40
(fountain of knowledge) Wed 11-Nov-26 22:56:24
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
Simple question why do you believe its a database issue? you say the pole 90m has FTTP equipment on it and the pole outside your house doesn't.
Standard User parklife
(newbie) Wed 11-Nov-26 23:03:20
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues". It's bizarre.

Edited by parklife (Wed 11-Nov-26 23:07:38)

Standard User parklife
(newbie) Wed 11-Nov-26 23:06:19
Print Post

Re: Error in openreach database, how to get fixed?


[re: Pheasant] [link to this post]
 
my current (and longstanding) ISP is Vodafone. The failed switch which I cancelled was with Zen.
Standard User PCJM40
(fountain of knowledge) Wed 11-Nov-26 23:10:00
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues"
Have you mapped out the other Openreach poles between the line of sight pole and your property? could the FTTP be delivered via multiple drops across them? If its under 350m then they could consider doing that.
Standard User Pheasant
(eat-sleep-adslguide) Wed 11-Nov-26 23:17:00
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
I think with the benefit of hindsight, cancelling the switch may not have worked in your best interest insofar as getting a working FTTP connection.

When the connection is not straightforward, best to find an ISP that’s more likely to chase Openreach to resolve. Someone like A&A or Aquiss. Openreach usually do get there eventually, but patience is required and it may take some time. A few months is not unheard of where infrastructure needs to be upgraded or replaced.

Perhaps install this as a new connection and cancel the copper connection after the fact.
Standard User parklife
(newbie) Wed 11-Nov-26 23:19:44
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
In reply to a post by PCJM40:
In reply to a post by parklife:
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues"
Have you mapped out the other Openreach poles between the line of sight pole and your property? could the FTTP be delivered via multiple drops across them? If its under 350m then they could consider doing that.

Thanks. interesting idea. There's no line of sight from the pole opposite to any other, so that sort of approach would need to go via an attachment to neighbour's house (or houses). But as I'm happy with the low latency FTTC connection I have, correcting the database would I hope suffice to allow me to switch to FTTC with another ISP.
Standard User burble
(experienced) Wed 11-Nov-26 23:28:06
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
In reply to a post by PCJM40:
In reply to a post by parklife:
It is possible to see both Openreach and HyperOptic fibre equipment on other poles in the street, but only Hyperoptic on the nearest pole.
For 6 of the 8 houses in my terrace, of which mine is in the middle, the checker says FTTP is not available. But for mine it says it is but with "possible line of sight issues"
Have you mapped out the other Openreach poles between the line of sight pole and your property? could the FTTP be delivered via multiple drops across them? If its under 350m then they could consider doing that.

Thanks. interesting idea. There's no line of sight from the pole opposite to any other, so that sort of approach would need to go via an attachment to neighbour's house (or houses). But as I'm happy with the low latency FTTC connection I have, correcting the database would I hope suffice to allow me to switch to FTTC with another ISP.


How does the present copper get to the pole?
At one of our houses the fibre has to go via several poles from the one which has the CBT.

Edited by burble (Wed 11-Nov-26 23:30:12)

Standard User parklife
(newbie) Thu 12-Nov-26 08:27:53
Print Post

Re: Error in openreach database, how to get fixed?


[re: Pheasant] [link to this post]
 
Thank you for the suggestions.
It turns out that Aquiss will offer me a SOGEA connection over copper 🙂 - unlike all the other ISPs I have tried, so I will reach out to them as my next step.
Standard User parklife
(newbie) Thu 12-Nov-26 08:32:42
Print Post

Re: Error in openreach database, how to get fixed?


[re: burble] [link to this post]
 
thanks for the reply.
the copper connection appears to come out of the ground.
as per other strand of this chat, I followed up the suggestion of looking at Aquiss ISP and unlike other ISPs it appears that they will offer me a SOGEA over copper so I will reach out to them.
thanks also to @PCJM40 for the suggestions. Hopefully trying Aquiss gives me a solution!
Standard User Taras
(eat-sleep-adslguide) Thu 12-Nov-26 09:07:51
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
can you give us the results from

https://www.broadbandchecker.btwholesale.com/#/ADSL/...

also you should have done your own thread not open a 2 year old one
Standard User Pheasant
(eat-sleep-adslguide) Thu 12-Nov-26 09:16:24
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
Thank you for the suggestions.
It turns out that Aquiss will offer me a SOGEA connection over copper 🙂 - unlike all the other ISPs I have tried, so I will reach out to them as my next step.

No worries. Aquiss are good guys (I use them on one of my connections) and will help you with either a SOGEA connection or getting the FTTP connection sorted should you decide to go down that route. Good luck.
Standard User PCJM40
(fountain of knowledge) Thu 12-Nov-26 10:11:22
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
as per other strand of this chat, I followed up the suggestion of looking at Aquiss ISP and unlike other ISPs it appears that they will offer me a SOGEA over copper so I will reach out to them.
You said your current ISP (Vodafone) is expensive but after the usual Aquiss front loaded deals you will be in the same boat price wise, I would recommend at some point once you've switched you talk to Martin the Aquiss owner and see if he is prepared to look into the FTTP issue for you as at some point it needs resolving as FTTC isn't going to be around forever.
Standard User Pheasant
(eat-sleep-adslguide) Thu 12-Nov-26 11:20:44
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
In reply to a post by PCJM40:
In reply to a post by parklife:
as per other strand of this chat, I followed up the suggestion of looking at Aquiss ISP and unlike other ISPs it appears that they will offer me a SOGEA over copper so I will reach out to them.
You said your current ISP (Vodafone) is expensive but after the usual Aquiss front loaded deals you will be in the same boat price wise, I would recommend at some point once you've switched you talk to Martin the Aquiss owner and see if he is prepared to look into the FTTP issue for you as at some point it needs resolving as FTTC isn't going to be around forever.

If its all about the price / bottom line (and I know it is for many despite what they say publicly) then don't go to Aquiss - but if it's a comparison on customer service Vodafone vs Aquiss. Then they are. light years apart in quality.

Depends what you want on "Good, Fast, Cheap: choose only two" rule
Standard User adslmax
(eat-sleep-adslguide) Thu 12-Nov-26 12:23:19
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
Thank you for the suggestions.
It turns out that Aquiss will offer me a SOGEA connection over copper 🙂 - unlike all the other ISPs I have tried, so I will reach out to them as my next step.


I used to be with Aquiss for SoGEA 80/20 can't fault them at all, no issues for 12 months! Think my fastest speed on SoGEA was closer to 75Meg all times all day.
Standard User PCJM40
(fountain of knowledge) Thu 12-Nov-26 12:30:37
Print Post

Re: Error in openreach database, how to get fixed?


[re: Pheasant] [link to this post]
 
In reply to a post by Pheasant:
If its all about the price / bottom line (and I know it is for many despite what they say publicly) then don't go to Aquiss - but if it's a comparison on customer service Vodafone vs Aquiss. Then they are. light years apart in quality.
Thats why I said the important bit highlighted in blue below
In reply to a post by PCJM40:
You said your current ISP (Vodafone) is expensive but after the usual Aquiss front loaded deals you will be in the same boat price wise
For me, I am happy with Fast and Cheap thats why I am currently with Plusnet and extremely happy with the speed and latency but also worth noting that in 25 years I've never had an issue with any of my providers customer service.
In reply to a post by Pheasant:
Depends what you want on "Good, Fast, Cheap: choose only two" rule
Standard User parklife
(newbie) Thu 12-Nov-26 21:56:48
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
In reply to a post by Taras:
can you give us the results from

https://www.broadbandchecker.btwholesale.com/#/ADSL/...

also you should have done your own thread not open a 2 year old one


In reply to Taras, here are the stats you asked for:

Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Handback
Threshold(Mbps) WBC FTTC Availability WBC SOGEA Availability Left in Jumper
High Low High Low
VDSL Range A (Clean) help 50.8 35 9.1 6.8 32.4 Unavailable Available --
VDSL Range B (Impacted) help 49.3 32.4 9 6.2 25 Unavailable Available --
G.fast Range A (Clean) help -- -- -- -- -- Unavailable -- --
G.fast Range B (Impacted) help -- -- -- -- -- Unavailable -- --
Featured Products Downstream Line Rate(Mbps) Upstream Line Rate (Mbps) Downstream Range (Mbps) Availability Date FTTP Install Process
WBC FTTP Upto 1800 Upto 220 -- Available 1 Stage
Observed Speeds VDSL
Max Observed Downstream Speed 35
Max Observed Upstream Speed 6
Observed Date 2026-11-12
Other Offerings Availability Date
VDSL Multicast Available
Premise Environment Status
Bridge Tap N
VRI N
NTE FacePlate N
Last Test Date 03-09-2026
Exchange Product Restrictions Status
FTTP Priority Exchange N
WLR Withdrawal Y
SOADSL Restriction N
Our records show the following FTTP network service information for these premises:-Single Dwelling Unit Residential OH Feed potential Line of sight problems.

FTTP is available and a new ONT may be ordered.

The exchange is not in a current fibre priority programme

As a WLR withdrawal exchange, product restrictions apply

SOADSL is not restricted at the exchange

For all ADSL and WBC Fibre to the Cabinet (VDSL or G.fast) services, the stable line rate will be determined during the first 10 days of service usage.

For all SOADSL services,the stable line rate will be determined during the first 10 days of service usage.

Actual speeds experienced by end users and quoted by CPs will be lower due to a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.

If you decide to place an order for a WBC fibre product, an appointment may be required for an engineer to visit the end user's premises to supply the service

In order to be eligible for handback, downstream speed should be less than Downstream Handback Threshold values.

ADSL, ADSL2+ and SOADSL availability: If shown at FTTP or SOGEA premises,ADSL, ADSL2+ and SOADSL are not available to order due to WLR Withdrawal stop sell rules. CPs should order FTTP or SOGEA. Copper products are only available by exception.

Thank you for your interest
Standard User parklife
(newbie) Thu 12-Nov-26 22:22:01
Print Post

Re: Error in openreach database, how to get fixed?


[re: PCJM40] [link to this post]
 
Thanks for the further advice.

Moving over to a broadband only provider like Aquiss makes me question how to best move my landline to VoIP. Currently my Vodafone have notified me that they are going to move my landline to digital voice in the next 2/3 weeks. I have been told that trying to port the number to VoIP often results in the ISP taking it as a broadband cancellation request as well. So I wonder if cancelling the landline and asking the new VoIP provider to pick up the number afterwards is the best approach and whether to do that now or let the digital voice transfer complete before cancelling. I’m thinking probably let the transfer to digital voice go through rather cancel when the transfer process may be part done and risk possibly leaving the line setup possibly in a mess with potential knock-on issues from that.

Any views on this question would be appreciated.
Standard User DFScale
(experienced) Thu 12-Nov-26 22:52:14
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
Moving over to a broadband only provider like Aquiss makes me question how to best move my landline to VoIP.


Don't move your service. [edited to add: get VOIP with a temporary number and get it working] Order a new fttp service. Then transfer your landline to VOIP, with an independent supplier [Aquiss don't do VOIP], which will make it available on the fttp. Then cancel the old line.

Edited by DFScale (Fri 13-Nov-26 07:35:23)

Standard User parklife
(newbie) Thu 12-Nov-26 23:33:19
Print Post

Re: Error in openreach database, how to get fixed?


[re: DFScale] [link to this post]
 
Thanks for the advice. In fact FTTP isn’t available at my place. Would that change your suggestion on sequencing at all?
Standard User DFScale
(experienced) Fri 13-Nov-26 07:33:31
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
OK, if it is SOGEA, it will use the old wires, so no benefit to my solution.

Instead get voip with a temporary number [I should have suggested this anyway] sand get the voip supplier to acquire your old number, the moment you have SOGEA.
Standard User Taras
(eat-sleep-adslguide) Fri 13-Nov-26 08:18:25
Print Post

Re: Error in openreach database, how to get fixed?


[re: parklife] [link to this post]
 
In reply to a post by parklife:
Thanks for the advice. In fact FTTP isn’t available at my place. Would that change your suggestion on sequencing at all?


your btwholesale profile says otherwise. Yes there is Line of sight issues, but in most cases it is resolved.
Standard User parklife
(newbie) Fri 13-Nov-26 18:21:47
Print Post

Re: Error in openreach database, how to get fixed?


[re: DFScale] [link to this post]
 
Thank you for the thoughts on this question. I think I will take the approach that you suggest. 🙂
Standard User parklife
(newbie) Fri 13-Nov-26 18:30:22
Print Post

Re: Error in openreach database, how to get fixed?


[re: Taras] [link to this post]
 
Thank you Taras. The fact that my profile incorrectly says it is available when it is not is exactly the problem I have. Six of the eight houses in the terrace - including ones on both sides - are (correctly) listed as FTTP not available. And the view of the four engineers that came out on three separate occasions was that - being around a right angle bend to the nearest pole with FTTP - there was no way for them to connect up my place.
Hopefully Openreach, will make FTTP available in due course. It will be interesting to see how they do it.
Pages in this thread: 1 | 2 | 3 | 4 | 5 | (show all)   Print Thread

Jump to