Technical Discussion
  >> Hardware Issues


Register (or login) on our website and you will not see this ad.


Pages in this thread: 1 | [2] | >> (show all)   Print Thread
Standard User AEP
(eat-sleep-adslguide) Thu 26-Jan-12 19:13:13
Print Post

Re: More router issues


[re: Seansmit17] [link to this post]
 
Ah. A switch is not a router.

Try the portscan.
Standard User camieabz
(sensei) Thu 26-Jan-12 19:16:29
Print Post

Re: More router issues


[re: Seansmit17] [link to this post]
 
http://support.dlink.com/Emulators/dslg604t/help_hom...

The default IP address is 192.168.1.1 with a subnet mask of 255.255.255.0


Have you double checked that IP as gateway with the correct mask? Definitely not IPv6?

~~~~~~~~~~


© Camieabz 2002-2011

All Connection Data ~ plusnet

Scottish Labour politician: “The SNP are on a very dangerous tack. What they are doing is trying to build up a situation in Scotland where the services are manifestly better than south of the border in a number of areas.”

Interviewer: ”Is that a bad thing?”

Scottish Labour politician: “No, but they are doing it deliberately.”
Standard User AEP
(eat-sleep-adslguide) Thu 26-Jan-12 19:32:42
Print Post

Re: More router issues


[re: camieabz] [link to this post]
 
Interesting, the manual says 10.1.1.1. Whatever, one of them should work.

It sounds to me like a failed firmware update. I doubt the switch part of it relies upon the firmware and it's beginni g to sound like it's not responding on any IPAddress. DHCP should be enabled by default, so something is wrong.


Register (or login) on our website and you will not see this ad.

Standard User Seansmit17
(eat-sleep-adslguide) Thu 26-Jan-12 20:34:35
Print Post

Re: More router issues


[re: AEP] [link to this post]
 
seems so..

but i need an XP computer to use the recovery tool, and i dont have an xp pc atm

BT 8MB
Standard User Pipexer
(eat-sleep-adslguide) Sun 29-Jan-12 11:30:32
Print Post

Re: More router issues


[re: Seansmit17] [link to this post]
 
It should go without saying, but to connect to all those IP addresses, you should put your computer in the same subnet with similiar IP address. If you have tried to connect to all them IP addresses when your machine has an APIPA address, then it is of course not going to work.

______________
Zen 8000 Active
Pages in this thread: 1 | [2] | >> (show all)   Print Thread

Jump to