Thank you for the note - I have tried to do as you suggest but without success.
When I ask the TV to connect to the router it states that it cannot connect to the gateway. I am pretty sure that the connection from the homeplug to the router is OK and that the problem lies in the settings I have used on the TV.
I have setup the connection as best I can using the values from the router status screen. Can I ask you have a quick look - can you spot any obvious incorrect values?
The TV network settings are here.
The router status settings are here.
Hope you can spot something.
Hi, I have a similar setup but without the home plugs. The problem you have the TV is configured with a fixed static IP address 192.168.1.6 and your router DHCP server will issue anything it likes so it wont connect unless it issues the correct IP address.
You need to configure the EE Bright Box wireless router with a DHCP server range, note your TV must not
be within that range.
configure your Bright Box router DHCP server range
DHCP server Range Start 192.168.1.21
DHCP server Range End 192.168.1.250
This will give you from 192.168.1.1 to 192.168.1.20 = 20 static IP addresses
And from 192.168.1.251 to 192.168.1.255 = 5 static IP addresses.
You can use any of the 25 static IP addresses for devices on your LAN (Local Area Network) and the addresses will not change.
EE broadband WBC
20 Mbps. Sync 11864 kbps Downstream, 1189 kbps Upstream.
ADSL2+ wireless N Router supplied by Orange
BT Business Hub 2Wire 2700HGV
v2 ADSL2+ Dual SSID wireless Router
Edited by E7er (Mon 10-Dec-12 19:30:56)