Technical Discussion
  >> Apple Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | [2] | (show all)   Print Thread
Standard User deleted
(deleted) Thu 28-May-09 20:09:34
Print Post

Re: 2nd-user Mac for iPhone development


[re: micksharpe] [link to this post]
 
There are no cheap Macs that will work with the iPhone...

Mind you, it could be said there are no cheap Macs...

What you could try is look on eBay or something...

Edited by deleted (Thu 28-May-09 20:10:34)

Standard User deleted
(deleted) Thu 28-May-09 21:00:26
Print Post

Re: 2nd-user Mac for iPhone development


[re: micksharpe] [link to this post]
 
G4 dual proc and later G3 iMacs - OK for Tiger but Leopard nah.

eMac, PPC, the 1.25Ghz or above runs Leopard fine, but max is 1Gb RAM so limited multi-tasking. Cheap enough on eBay.
Standard User deleted
(deleted) Thu 28-May-09 22:21:55
Print Post

Re: 2nd-user Mac for iPhone development


[re: deleted] [link to this post]
 
Unfortuntaley IPhone development wont work with PPC machines, unless you want a lot of mucking around.


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Fri 29-May-09 08:02:05
Print Post

Re: 2nd-user Mac for iPhone development


[re: deleted] [link to this post]
 
Tragedy!

Try a hackintosh?
Standard User Spud2003
(experienced) Fri 29-May-09 10:55:02
Print Post

Re: 2nd-user Mac for iPhone development


[re: deleted] [link to this post]
 
In reply to a post by radiomarko:
Try a hackintosh?


That's what I also suggested here.
Standard User deleted
(deleted) Fri 29-May-09 19:37:13
Print Post

Re: 2nd-user Mac for iPhone development


[re: Spud2003] [link to this post]
 
Don't even need to build anything as flashy as that, a cheap ebay HP D530 with a good chunk of RAM will run Leopard (of the JaS variety) rather well. Not that I would condone such a thing... but google is your friend.
Pages in this thread: 1 | [2] | (show all)   Print Thread

Jump to