Advice on a new router please

Hi

I have just upgraded my Plusnet Internet speeds from 40Mb to 80Mb and I also want a new DSL Router to go with it...

I currently use a BT Home Hub 5B (Broadcom 63168 - 400mHz x 2 CPU - 128MB RAM)

what I'm looking for is a DSL Router with the following:

1) A Broadcom chipset
2) At least dual-core 800Mhz+ and 128MB+ RAM
3) Dual or Tri Band Wifi (N,AC 5Ghz etc)
4) Gbit LAN
5) Be able to access SNR/QLN/Bit-Loading etc through Router Monitoring Software such as DSLstats
6) Have G.INP
7) Be wall mountable

can anyone advise which routers are available that can do/has all this?

thanks in advance

Edited by paulb100 (Wed 19-Dec-18 20:40:33)

..If I could also get MAC spoofing that would be good too

netgear d7000 in all its guises meets the spec you require not sure if they have updated firmware to enable it to work with BTs form native ipv6 since I had one

Hi, would you not consider separates? I love to tinker with my router and always used combined modem/router units, but when I tinkered too much one day DLM decided my line was unstable and needed to act, which was then really difficult (impossible) to get reset.
After that I got a separate modem and router, I used an Asus RT AC68U with Merlin Firmware on it and I'm sure it has all the options your looking for and can run OpenVPN at router level.
I then had the luxury of being able to tinker and reboot as much as I wanted without upsetting DLM as my modem stayed connected at all times.
I still use same style setup but with Virgin and using Hub3 in modem mode but I'm now trying out Ubiquiti router and on a steep learning curve lol.
I tried a few modems on my FTTC connection and always went back to an old unlocked HG612 3b, there's a few threads on here that give suggestions on what modem they find best.

I would second that. There is another advantage of separates, that firstly the optimal place for the WiFi is very unlikely to be right next to the master socket, which is the optimal place for the VDSL modem.

Personally I think that an Edgerouter X SFP (skip the plain X as the SFP has PoE out on multiple ports), coupled with some UniFi AP-Lite, AP-LR and AC-M depending on requirements and a HG612 3b or Vigor 130 is a really difficult combination to beat. Takes a bit more setup, but you get a load of flexibility and firmware that is going to get security updates.

One neet trick is to use the following to power your modem using the 24V passive PoE of the Edgerouter X SFP.

https://www.amazon.co.uk/gp/product/B00EBCQ5FM

It will work with either the HG612 or the Vigor 130. Then you can put your EdgeRouter X SFP on a UPS and then your internet can ride out a power cut. Or you can power cycle the modem from the EdgeRouter.

THANKS FOR THE REPLIES

I have had 2 devices before (HG612 + a Netgear Router) and its not something I wish to do again, I live on my own in a very small flat and have my PC hard wired, I use 5Ghz wifi some times on my phone, I dont have wifi connectivity issues so router location isnt that important to me (with regards to getting better wifi coverage)

that Netgear D7000, does it support G.INP? I know it supports G.FAST - doesn't matter much anyway as my cabinet is an ECI (Lantiq) which don't support G.INP

Beamforming is something I left out that I would like to have

There are better all-in-one routers than the Netgear D7000 for the same money or less.

If money is no object and you want the very best, then go for one of the Netgear D7800, Asus DSL-AC88U, TP Link VR2800 or Billion 8900AX. They all use a decent Broadcom or stable Lantiq DSL chipset with excellent wifi range/coverage - all are 4x4 stream Mu-Mimo routers.

If you want something cheaper around the £100 mark, then the TP Link VR900v2 is an excellent option. Its only a 3x3 stream router so wifi won't be as good as the above routers but its still a very good router for wifi and it has a Broadcom DSL chipset.

If you don't want to spend too much (<£100), then something like the Billion 8800NL or the TP Link VR600 are good budget routers.

Netgear one on sale just now if thats what you want? https://www.argos.co.uk/product/7979457

Well in that case I would probable go with a Draytek 2762n or possibly 2762ac.

Personally I would not touch "consumer" devices with a barge pole. If you are very lucky you might get a couple of years security updates after which they will expect you to buy a brand new device. If you are again lucky you might be able to load one of the open source firmwares on it but that is a lot of hassle in my experience.

In the end I got fed up with it all and moved to using an EdgeRouter X SFP with the HG612 BT provided which had the advantage of being able to power my UnFi AC LR access point using PoE. I have since gone slightly crazy with the PoE and if the gFast pod on my cabinet gets activated I only need to replace the HG612.in my setup.

In reply to a post by jabuzzard:

Well in that case I would probable go with a Draytek 2762n or possibly 2762ac.

As good as the Draytek routers are for business use, the Wi-Fi spec on them isn’t great, eg they don’t support beam forming nor do they go beyond 2x2 or 3x3 streams (can’t remember which). Before you say he should use an additional access point for wifi, the OP has made it very clear he requires an all-in-one router.

Edited by baby_frogmella (Sun 23-Dec-18 09:06:15)