In reply to a post by bobble_bob:

Whats your target noise margin now set at? Or if you dont know, are you syncing at the same speed as before?

Bandwidth (Up/Down) [kbps/kbps]: 1,023 / 9,470

Roughly the same as it was before I restarted my router when I was connected to COMS

Using the RouterStats program someone linked above, the only "noise" setting I could find gave me a Rx Noise: 12dB

I have no idea what it was before.
EDIT: found this in my moden statistics page



Bandwidth (Up/Down) [kbps/kbps]: 1,023 / 9,470
Output Power (Up/Down) [dBm]: 12.0 / 19.5
Line Attenuation (Up/Down) [dB]: 15.5 / 26.0
SN Margin (Up/Down) [dB]: 12.5 / 12.0

Edited by deleted (Tue 04-Aug-15 19:20:51)

Ah, reason i asked is usually when migrating with a Talk Talk line they reset your line stats to their default values. This can increase noise margin (inturn reduce sync) and i believe interleaving is turned on by default when migrating.

The default noise margin when migrating with TT is 12db. You can lower this and get a faster sync speed. db on a good line or 9db will be better

Edited by bobble_bob (Tue 04-Aug-15 19:58:00)

Changeover went smoothly here too.

Pings definitely seems higher. Speeds do look roughly the same tho.

Hopefully things will settle down.

As op said, thanks Timico for the smooth changeover.

Another smooth migration. Restarted router last night and router connected via Timico with existing authentication. A traceroute showed typical 13 hops with a 30ms latency via Enta, now about 9 hops and 40ms latency via Timico. Appears more snappy despite longer latency. Will the connection retune automatically to get similar latency as before? (I don't remember asking for any special configuration in the past). I am 25m from the exchange and can see most of the copper from my front window,

FWIW I was one with no issues with ADSL24/COMS - the connection has always been good (Sunday excepted).

/G