User comments on ISPs
  >> Sky Broadband


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | 2 | 3 | 4 | (show all)   Print Thread
Standard User markie101
(newbie) Mon 15-Oct-07 08:52:03
Print Post

Using my own router


[link to this post]
 
Hi guys, sorry if this has been asked before.

I want to use my D-Link router as its better than the Netgear supplied by Sky.

I set it up and it connects ok but I get no throughput, can't bring any web pages up.

Any help would be great!

Thanks
Standard User meteosat
(member) Mon 15-Oct-07 09:24:49
Print Post

Re: Using my own router


[re: markie101] [link to this post]
 
Have you extracted the user name and password from the Netgear?
Standard User markie101
(newbie) Mon 15-Oct-07 09:36:38
Print Post

Re: Using my own router


[re: meteosat] [link to this post]
 
thanks for the quick reply.

Sorry to sound dim but where do I get the username/pass from. I have entered into the router settings but can't see it anywhere.

thanks


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Mon 15-Oct-07 10:07:37
Print Post

Re: Using my own router


[re: markie101] [link to this post]
 
Go here

http://www.philipnicosia.com/2006/10/03/sky-broadband-username-and-password/

and do as instructed, and then use these details in the old router. remember that Sky use PPPoA no PPPoE.

Hope this helps
Standard User markie101
(newbie) Mon 15-Oct-07 12:36:51
Print Post

Re: Using my own router


[re: deleted] [link to this post]
 
Great!

I will give this a go later.


Thank you very much!
Standard User AbandonShip
(fountain of knowledge) Mon 15-Oct-07 13:04:15
Print Post

Re: Using my own router


[re: deleted] [link to this post]
 
Or just click the link below to display the password in your browser.

http://192.168.0.1/setup.cgi?todo=ping_test&next_file=diagping.htm&c4_IPAddr=1;(/bin/grep+pppoa_[up]+/tmp/nvram)%3e%261
Standard User deleted
(deleted) Mon 15-Oct-07 20:46:12
Print Post

Re: Using my own router


[re: AbandonShip] [link to this post]
 
nice thanks just changed back to my good ol' speedtouch 585

and now get this
http://www.thinkbroadband.com/speedtest/results/id/119247725862841524177.html


was synced at 8600 before on sky router

now

Bandwidth (Up/Down) [kbps/kbps]: 764 / 9,858 on speedtouch
Standard User deleted
(deleted) Tue 16-Oct-07 10:04:35
Print Post

Re: Using my own router


[re: deleted] [link to this post]
 
The Speedtouch is much easier to tweak SNR margins with programs like DMT. I think the default SNR on Sky is 7dB with the Netgear router - if your line noise variation is less than this, you can knock it down to 5 or 6 dB. I think the default for the Speedtouch is 6dB, which is probably why you saw an increase in line sync. And you get that straight away - none of this "line profile" stuff on Mid and Max !

Standard User AbandonShip
(fountain of knowledge) Tue 16-Oct-07 11:37:59
Print Post

Re: Using my own router


[re: deleted] [link to this post]
 
The Sky router can easily be tweaked until a firmware update that stops that is released. Hopefully the next Sky firmware will update the modem firmware and improve performance.
Standard User soundsystem
(knowledge is power) Tue 16-Oct-07 16:19:55
Print Post

Re: Using my own router


[re: AbandonShip] [link to this post]
 
From what we have heard, its on the cards.

"The Sky router can easily be tweaked until a firmware update that stops that is released"

The new FW will block all known apps to find username and password etc, but will not stop you from reverting to other FW at the moment.

Edited by soundsystem (Tue 16-Oct-07 16:21:13)

Pages in this thread: 1 | 2 | 3 | 4 | (show all)   Print Thread

Jump to