I just used DMT and I am on interleaved path 13, now this is the stats that I have from my hub.

Link Information

Uptime: 0 days, 5:03:22
Modulation: G.992.1 Annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 8,096
Data Transferred (Sent/Received) [MB/MB]: 20.09 / 131.81
Output Power (Up/Down) [dBm]: 12.0 / 19.5
Line Attenuation (Up/Down) [dB]: 8.5 / 18.0
SN Margin (Up/Down) [dB]: 22.0 / 9.5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 93
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0

Can you see any reason that I should be on interleaved instead of fast as it always was on previously, and is there much of a difference between interleaved and fast ?

my snr down goes to 10 max and to 9.5 lowest that I have seen


any info would be great.

P.S

I tried loweing the snr margin to its lowest but it never falls below what its already at. 9.5-10db

Edited by EVIL_SC0TSMAN (Mon 02-Oct-06 00:00:32)