|
|
|
I noticed one day that when somebody made a call from the downstairs phone (connected to an filtered extension socket, was previously the master socket) that my connection would drop from a sync of 6800kbps (SNR Margin 7dB) down to 4400kbps (SNR Margin 13dB). Even when somebody just picked up the phone, this seemed to lead to a deterioration of the SNR Margin (from 7-4dB)
However this only seemed to occur on that one specific day? As the problem no longer seems to occur. However as a result i now constantly sync at 6560 with an SNR Margin of 7-8dB and I have fallen below the BRAS profile of 6000kbps which is what I had previously.
The question i have, is there anything I can do to get my sync speed back to what it was? (6800-7200kbps) or do I just have to live with it?
Any advice/feedback/comments would be greatly appreciated.
Thanks in advance
|
|
|
|
Note: Currently I use the ADSLnation filtered faceplate at my master socket(master socket was moved from downstairs to my computer room) which is what i use to connect my router to.
|
|
|
|
Anyone?
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
|
I'm not sure you'll get too many replies. Your connection speed has dropped by 150k - that's not unusual, long term.
|
|
|
|
All I can suggest is that you remove the faceplate and connect to the test socket behind. Although the filtered faceplate should remove any issues with the internal wiring, it may not be wired correctly, and this test will establish the fact or eliminate it.
|
|
|
|
Being pedantic it's actually nearer 500kbps, but basically is there is nothing i can do? It seemed to occur after a sudden burst of noise when using the downstairs telephone one night? Why hasnt my sync speeds returned to what they were before? Since ADSL MAX i never synced near 6500kbps.. I was generally always nearly 7000kbps and regularly above it.
I'm not too bothered by the sync speeds but more by the fact that my BRAS profile has dropped to the one below.
|
|
|
|
How long ago did the drop occur? It will take at least three days to recover.
|
|
|
|
I'll give it a go, but with the same wiring on the filtered faceplate I was syncing nearer 7200kbps. This reduction of speed has only seemed to occur after the issue i had with the downstairs telephone knocking out my connection one specific day.
|
|
|
|
Probably about 10 days. The BRAS has jumped and has risen to match the sync but the sync has dropped enough so that the BRAS profile is not the same as it was before.
|
|
|
|
Which suggests a problem with the phone, wiring, or filtered faceplate. Start with the basic test and then introduce the variables. Fwiw, I had a stable connection for months, then it died completely. BT came out and regularised my wiring (although BT installed, the master was one of four sockets radiating off from the cable entry point) and all has been well since. Nothing had changed on the surface, but clearly something had gone out of tolerance enought to drop the connection.
|
|
|
|
I take it you've been through a re-boot with the router? If you still don't get back to the sync you had, it suggests local conditions have deteriorated - maybe even your line (a joint somewhere, perhaps).
|
|
|
|
I have re-booted the router roughly once a day for a few days. Anyway something has definitely deteriorated, I just hope i can get my sync back to what it was. I was also thinking of moving to Be soon (when my exchanged in enabled), so I need my line to be as good as possible.
Thanks for the suggestions rikbean, I'll try it out and i'll get back to you soon.
|
|
|
|
Update connected router directly into the test socket via a microfilter, the sync speed actually went down from 6657kbps (SNR Margin 7) to 6528kbps (SNR Margin 8). Went back to the same setup as before and the sync went even further down to 6432 (SNR Margin of 8).
Is there anything else I can try? Do i just accept the fact that the quality of my line has deteriorated? Or can I call BT (via ISP) to do anything? Is there anything else i can do?
I notice on occasions that the SNR Margin drops instantly by 2 (from 7 to 5) when somebody uses a specific phone. But it seems to be intermittent?
Any comments/advice/feedback would be greatly appreciated.
|
|
|
if a specific phone causes problems, and other phones do not, then try double filtering the offending phone or using a better filter or replacing the phone.
Phil
666 kbytes/s with Demon
MaxDSL speeds - what do they all mean.
|
|
|
|
Even if i already have a filtered faceplate at the master socket?
Btw is there anything I can do with the deterioration in the quality of my phone line?
|
|
|
In reply to:
Even if i already have a filtered faceplate at the master socket?
Yes. Its still just a filter so it can fail or faced with a lousy phone be inadequate.
What's the evidence that the line has deteriorated ?
Phil
666 kbytes/s with Demon
MaxDSL speeds - what do they all mean.
Edited by yarwell (Fri 27-Oct-06 20:01:50)
|
|
|
Well I used to sync at 7000-7200kbps regularly with an SNR Margin of 7dB. After the issue described above. I cannot seem to sync higher than 6500kbps with the same SNR. More noise/interference being caused from somewhere?
Nothing has changed from my end. Router connected to the same place (filtered faceplate) , no new phones added. Removing all phones makes no difference.
Edited by deleted (Fri 27-Oct-06 20:13:34)
|
|
|
you seem to provide evidence that it is a phone that causes the problem ? or have I lost track.
Phil
666 kbytes/s with Demon
MaxDSL speeds - what do they all mean.
|
|
|
|
Initially it was the phone that caused a problem on one particular day where it caused me to resync at much lower speeds, but since then, even with the problem phone connected or disconnected the sync speed has dropped roughly 700kbps and hasnt changed with the SNR Margin only increasing slightly for the lower sync (7-8dB, whereas before, this SNR Margin was the same with a sync above 7000kbps).
|
|
|
|
Everybody stumped then?
|
|
|
yes  A high resistance fault on the line can give your symptoms but apparently they aren't easy to find and you may also struggle to get your ISP to despatch a BT engineer with your current level of service.
Phil
666 kbytes/s with Demon
MaxDSL speeds - what do they all mean.
|
|
|
Thanks yarwell, at least you've provided a hint as to what the problem could be. A little glimmer of hope which I will hold on to and pester my ISP about.
If anyone has any other suggestions feel free to comment and Yarwell if something else crops into your head do tell.
|