In reply to:{cahaddras}Attenuation is only relevant indirectly - in its contribution to the SNR. It's the SNR that determines line speed and reliability. Attenuation is very easy to compensate for - you just amplify the signal again. ADSL is all about differentiating signal from noise.
{ETEE}That doesn't really make sense. If you amplify the signal you also amplify the noise. My point is that attenuation is a limiting factor in that it defines the highest speed attainable on a line.
If you amplify, SNR remains constant [apart from noise from the amplifier]. So with a good SNR, but high attenuation, amplification gives you the same SNR and less attenuation
In reply to:{ETEE}you are misrepresenting what I said which is really the same as you are saying in that noise on a line determines the actual speed.
So you are saying attenuation determines highest attainable speed, but SNR determines actual speed? Pls explain
Everything below the line above is my sig
[Notice: Private mail is turned on, but anything received by these means can and will be published]



Pages in this thread:
Print Thread
pitnicker