Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User deleted
(deleted) Sat 11-Apr-09 12:02:23
Print Post

NTE5 socket odd behaviour


[link to this post]
 
My property was built 4 years ago and has an NTE5 master socket in the living room and 2 extension sockets, one in the hall and one in the living room by the TV.

I have got my router plugged directly into the test socket as I don't have any use for the extensions as I have not got any PSTN phones (I only use VOIP for voice).

My understanding is that once the NTE5 faceplace is removed that this disconnects all extension sockets, but the hall extension socket remains "live"!

I am wondering if this means that BT miswired things as there has never been anyone living at the property apart from me so it's not like someone might have tampered with the wires without my knowledge.

I opened the hallway extension to look at the wires behind it and there are 2 multicore cables attached to it. I assume one cable goes the the master socket and the other goes to the 2nd extension by the TV, but this does not explain why the TV extension is "dead" and the hallway extension is "live".

There are 2 multi core extension wires coming to the master socket, one from the TV extension and another one that is just hanging there but looks like it has never been connected to anything!

Very odd! I'm wondering if it's worth getting BT to put right their own side of the circuit as they should be responsible for any faults. I don't really like the idea of not being able to ever disconnect the hall extension, especially as I should be getting a BRAS rate better than 4000 on a 30db attn line and the whole point of an NTE5 should be the ability to disconnect all extensions to eliminate them as potential sources of noise.
Administrator MrSaffron
(staff) Sat 11-Apr-09 13:01:18
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
The wiring on new builds is often done by the builders, i.e. BT do up to the master entry point, and builders are known for not always doing a brilliant job

It is a case of tracing the exact colour cores to figure out what has been done, but sounds like the hallway was the master, and has been converted to an extension socket with the master being moved (incorrectly to the lounge.

A lot depends on whether the work was done by BT or someone else.

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Sun 12-Apr-09 09:49:52
Print Post

Re: NTE5 socket odd behaviour


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
The wiring on new builds is often done by the builders, i.e. BT do up to the master entry point, and builders are known for not always doing a brilliant job


You bet ! If you're really lucky they will have used phone cable and not burglar alarm wire laugh


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Sun 17-May-09 22:49:25
Print Post

Re: NTE5 socket odd behaviour


[re: MrSaffron] [link to this post]
 
In reply to a post by MrSaffron:
The wiring on new builds is often done by the builders, i.e. BT do up to the master entry point, and builders are known for not always doing a brilliant job

It is a case of tracing the exact colour cores to figure out what has been done, but sounds like the hallway was the master, and has been converted to an extension socket with the master being moved (incorrectly to the lounge.

A lot depends on whether the work was done by BT or someone else.


I've had a closer look at the "odd" wiring and taken photos of the wiring.

It looks like there is a 6 core cable that feeds the hallway socket:
http://www.boliston.co.uk/temp/extension1.jpg

From that socket another 6 core cable then "feeds" the NTE5 master socket:
http://www.boliston.co.uk/temp/btmaster.jpg

It looks like only the "blue pair" is in use as the green & orange pairs have been left unconnected.

I'm not sure why the green and orange pairs had been connected up in the hallway socket if they appear to serve no purpose.

I have "tidied" up the hall socket by disconnecting the redundant green & orange pairs as I think they can cause interference, but whether it has made any difference I don't know:
http://www.boliston.co.uk/temp/extension_tidied.jpg

The things I'm still interested to know are what type of wire do BT normally use to make the connection between the pole and the NTE5 socket. Do they normally use 6 core cable?
When I say "pole" there is not any pole outside the block of flats I live in so I would assume there is an underground junction box instead of a pole.

Another thing I'm not sure about is if my hallway socket is BEFORE the NTE5 socket, can the ADSL signal be interfered with by any electronic components built into the hallway socket?

Edited by deleted (Sun 17-May-09 22:55:16)

Standard User deleted
(deleted) Sun 17-May-09 23:10:03
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
OK, probably my ignorance, but that doesn't look like a BT NTE5 Master sockets to me.

Should there not be a split front plate and an internal engineers test socket if that is the master ??

Might also explain why nothing disconnects when you remove the front plate.

Edited by deleted (Sun 17-May-09 23:19:58)

Standard User deleted
(deleted) Sun 17-May-09 23:15:37
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
In reply to a post by eebdsirhc:
OK, probably my ignorance, but that doesn't look like a BT NTE5 Master sockets to me.

Should there not be a split front plate and an internal engineers test socket if that is the master ??


I assume you are referring to photo:
http://www.boliston.co.uk/temp/btmaster.jpg ?

You are looking at the rear of the socket so the test socket is hidden from view.
Standard User deleted
(deleted) Sun 17-May-09 23:32:32
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
OK, so it was my ignorance. From the photo I could not make out the front removable plate. The front split plate is customer removable. Evidentally BT can get a little upset if you remove the whole of the NTE5 (and then call them in to do repairs, they may claim it is a chargeable call out).

But certainly there appears to be no outbound cables connected in your photo - which also confused me.

If the property is only 4 years old it should still be covered by the NHBC certificate - so well worth having a word with the builder to see if they can explain the wiring that was done.
Standard User Deadbeat
(fountain of knowledge) Mon 18-May-09 01:14:56
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
In reply to a post by boliston:
.... the block of flats I live in....


That may make things more difficult.
Standard User deleted
(deleted) Mon 18-May-09 08:25:51
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
It looks to me as if the NTE5A is installed in the wrong place.
If the hallway socket is the first point where the cable enters the building, this is where the NTE should be. The position where the NTE currently is, should be an extension socket.
Standard User Rockh
(eat-sleep-adslguide) Mon 18-May-09 08:53:40
Print Post

Re: NTE5 socket odd behaviour


[re: deleted] [link to this post]
 
As Panda has said it's either been installed in the wrong place or it has been moved. As you've tidied up the wiring and don't use any other phones then the extension socket is now a joint. There are no extra components in the extension socket so it shouldn't cause any issues unless someone plugs a phone in without a filter.

You could replace the slave socket with a joint box and fit a blanking plate over the dryline box. Technically this is BT's wiring as it's before the NTE5 and shouldn't be touched though.

Dave
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to