Technical Discussion
  >> Technical Issues


Register (or login) on our website and you will not see this ad.


These posts have been archived and can no longer be replied to or modified.
Pages in this thread: 1 | 2 | (show all)   Print Thread
Standard User imitech
(member) Wed 22-Apr-09 23:02:01
Print Post

What BT Socket Do I Have?


[link to this post]
 
Hello,

I hope I've posted this in the correct forum.

I've taken two pics (apologies for the quality) of the main BT master socket, inside and outside.

Inside > http://www.imranmohammed.com/adsl/inside.jpg
Outside > http://www.imranmohammed.com/adsl/outside.jpg

I wanted to give those new sockets a test to maybe improve my line stats in particular this : http://www.broadbandbuyer.co.uk/Shop/Reviews.asp?Pro...

I'm not quite sure where to start.

Thanks
Standard User deleted
(deleted) Wed 22-Apr-09 23:39:01
Print Post

Re: What BT Socket Do I Have?


[re: imitech] [link to this post]
 
Seems to be a standard Line Jack Unit type master socket which would not be compatible with the I-Plate.
However, as you appear to have no other extensions connected the i-plate would be of no benefit anyway
Standard User imitech
(member) Wed 22-Apr-09 23:53:52
Print Post

Re: What BT Socket Do I Have?


[re: deleted] [link to this post]
 
Thanks for the reply, would it be beneficial to have one of those adsl faceplates


Register (or login) on our website and you will not see this ad.

Standard User deleted
(deleted) Thu 23-Apr-09 00:03:48
Print Post

Re: What BT Socket Do I Have?


[re: imitech] [link to this post]
 
No, and you wont be able to install it for the same reason.
Standard User deleted
(deleted) Thu 23-Apr-09 22:29:31
Print Post

Re: What BT Socket Do I Have?


[re: imitech] [link to this post]
 
It looks like a bit of DIY has gone on to me. It looks like a split pair feeding as it doesn't look like an orange / white pair and the termination is on the wrong side meaning the insertion tool can't be fully pressed home.
Standard User imitech
(member) Fri 24-Apr-09 00:30:53
Print Post

Re: What BT Socket Do I Have?


[re: deleted] [link to this post]
 
In reply to a post by RandomJointer:
It looks like a bit of DIY has gone on to me. It looks like a split pair feeding as it doesn't look like an orange / white pair and the termination is on the wrong side meaning the insertion tool can't be fully pressed home.
How easy is it to replace one of these?
Standard User kwikbreaks
(eat-sleep-adslguide) Fri 24-Apr-09 06:54:35
Print Post

Re: What BT Socket Do I Have?


[re: imitech] [link to this post]
 
> How easy is it to replace one of these?

Very easy. You just phone BT sales and ask them to replace it. I think there is a service called "regualrisation of master socket" or some such which costs ~ £25.



If you can't fix it with a hammer you've got an electrical problem.
Administrator MrSaffron
(staff) Fri 24-Apr-09 08:06:39
Print Post

Re: What BT Socket Do I Have?


[re: imitech] [link to this post]
 
NOTE: Wrapping the wire carrying the ADSL signal around the wires carrying filtered phone may lead to cross talk particularly as wires look to be flat, rather than twisted pair.

Audiophiles insist on neat wiring, but there is a reason, and same goes for ADSL setups.

Andrew Ferguson, [email protected]
www.thinkbroadband.com - formerly known as ADSLguide.org.uk
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
Standard User deleted
(deleted) Fri 24-Apr-09 17:43:41
Print Post

Re: What BT Socket Do I Have?


[re: imitech] [link to this post]
 
Could you confirm the colours of the wires connected and whether there is any other sockets or block terminals in the house? As your pic is not clear.
Standard User deleted
(deleted) Fri 24-Apr-09 21:47:15
Print Post

Re: What BT Socket Do I Have?


[re: kwikbreaks] [link to this post]
 
In reply to a post by kwikbreaks:
> How easy is it to replace one of these?

Very easy. You just phone BT sales and ask them to replace it. I think there is a service called "regualrisation of master socket" or some such which costs ~ £25.


There USED to be such a product.

However, as I have recently found out, it no longer exists on the price list.

Instead, all such changes are subject to quotation. I was quoted £166.30 for simply getting one of these old Type 2/1 sockets changed out for an NTE5a (£115 for the Engineer call-out, plus an amazing £51.30 for the piece of plastic to be put on the wall!).

Clearly this is the sort of job that BT Openreach doesn't want to be concerned with anymore.
Pages in this thread: 1 | 2 | (show all)   Print Thread

Jump to