|
|
Hello,
I hope I've posted this in the correct forum.
I've taken two pics (apologies for the quality) of the main BT master socket, inside and outside.
Inside > http://www.imranmohammed.com/adsl/inside.jpg
Outside > http://www.imranmohammed.com/adsl/outside.jpg
I wanted to give those new sockets a test to maybe improve my line stats in particular this : http://www.broadbandbuyer.co.uk/Shop/Reviews.asp?Pro...
I'm not quite sure where to start.
Thanks
|
|
|
|
Seems to be a standard Line Jack Unit type master socket which would not be compatible with the I-Plate.
However, as you appear to have no other extensions connected the i-plate would be of no benefit anyway
|
|
|
|
Thanks for the reply, would it be beneficial to have one of those adsl faceplates
|
|
Register (or login) on our website and you will not see this ad.
|
|
|
|
No, and you wont be able to install it for the same reason.
|
|
|
|
It looks like a bit of DIY has gone on to me. It looks like a split pair feeding as it doesn't look like an orange / white pair and the termination is on the wrong side meaning the insertion tool can't be fully pressed home.
|
|
|
It looks like a bit of DIY has gone on to me. It looks like a split pair feeding as it doesn't look like an orange / white pair and the termination is on the wrong side meaning the insertion tool can't be fully pressed home. How easy is it to replace one of these?
|
|
|
> How easy is it to replace one of these?
Very easy. You just phone BT sales and ask them to replace it. I think there is a service called "regualrisation of master socket" or some such which costs ~ £25.
If you can't fix it with a hammer you've got an electrical problem.
|
|
|
NOTE: Wrapping the wire carrying the ADSL signal around the wires carrying filtered phone may lead to cross talk particularly as wires look to be flat, rather than twisted pair.
Audiophiles insist on neat wiring, but there is a reason, and same goes for ADSL setups.
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
|
Could you confirm the colours of the wires connected and whether there is any other sockets or block terminals in the house? As your pic is not clear.
|
|
|
> How easy is it to replace one of these?
Very easy. You just phone BT sales and ask them to replace it. I think there is a service called "regualrisation of master socket" or some such which costs ~ £25.
There USED to be such a product.
However, as I have recently found out, it no longer exists on the price list.
Instead, all such changes are subject to quotation. I was quoted £166.30 for simply getting one of these old Type 2/1 sockets changed out for an NTE5a (£115 for the Engineer call-out, plus an amazing £51.30 for the piece of plastic to be put on the wall!).
Clearly this is the sort of job that BT Openreach doesn't want to be concerned with anymore.
|
|
|
There USED to be such a product.
However, as I have recently found out, it no longer exists on the price list. It's still on the price list here at the bottom of the page.
I'm guessing the person you spoke to wasn't aware and tried to quote for a 'Time Related Charges' job instead, where time taken and materials used are charged for.
|
|
|
|
It may be just me but I find BT's online Price List incomprehensible. Several times I have tried searching for that section and failed (using the inbuilt search or by guessing the appropriate section).
|
|
|
Thanks for the assistance guys, I really appreciate it.
I spoke to sales who put me through to customer service however their systems were down at the time. The rep did confirm that such a product does exsist but to call back.
Do you think it would make much of a difference?
I've added another image where I've labelled the wires...
1) The hallway wired phone
2) The cordless phone extension running through to the cellar and into another room.
1 + 2 are attached to a phone splitter.
3) An ADSL cable running striahgt to the cellar, its about 3 meters. Its this one at ADSLnation
I will remove the phone splitter and test the line when I get home.
I'm thinking of getting these...
Professional Quality ADSL Microfilter [XF-1e]
Pro+ RJ11 - RJ11 ADSL 2+ 3m
What should I do about any intefference and the telephone splitter?
Thanks,
Imran
|
|
|
The main objective of all the internal wiring optimisation recommendations is to ensure that there is no lengthy ringwire connected to the ring capacitor in the master and any cable carrying the ADSL signal to the router is as short as possible and a twisted pair. So long as you achieve that then changing the master becomes pretty much irrelevant although an NTE5 style master fitted with a filtered faceplate helps achieve those aims in the most tidy way.
Fitting a filter at the master and running all the phones off the phone side of that and using a decent twisted pair cable to the router will achieve the same end - it won't look as tidy though and as MrS mentioned it would be better to keep the router lead away from the phone cables. It seems to me that that is in essence what you already have. Improving the filter and router cable certainly shouldn't do any harm but there's no guarantee that doing so will bring much improvement either - it depends on how good the stuff you already have is.
If you can't fix it with a hammer you've got an electrical problem.
|
|
|
If the modem lead is using twisted pair which you said it was, then going to an ADSL nation pro cable will make no difference, as they are essentially same cable.
A clearer picture is really the key to seeing what type of cabe is involved. Circular cross section cables are twisted pair, but flat ones i.e. around 5mm x 2mm cross section are not twisted.
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
You have attached your reply to the wrong post.
If you can't fix it with a hammer you've got an electrical problem.
|
|
|
Hi Andrew,
Thanks for your help with this.
According to the ADSL Nation website the wire I am currently using...
Telephone Cable CW1308
To BT specification CW1308
A high quality cable for use in wiring telephone line outlet sockets. The cable contains four solid tinned annealed copper twisted in to 2 pairs. Conductors each 0.5mm diameter insulated with colour-coded PVC. Overall insulation is in white PVC.
|
|
|
Which is twisted pair cable (I've ordered and use this cable for installs)
The Pro+ mainly gains the addition of a shield, which may help, but once using twisted pair the gain from shielding is minimal, better to do things like
a) Not run an ADSL/phone leads parallel to the mains wiring
b) Not run an ADSL signal cable alongside a phone cable.
|
|
The author of the above post is a thinkbroadband staff member. It may not constitute an official statement on behalf of thinkbroadband.
|
|
|
> How easy is it to replace one of these?
Very easy. You just phone BT sales and ask them to replace it. I think there is a service called "regualrisation of master socket" or some such which costs ~ £25. Replacing the old type LJUs isn't classed as "Conversion of hard-wired master socket to Linebox and Regularisation of illicit master socket" as mentioned in the price list, that refers to something entirely different. Getting that socket replaced "officially" for a newer NTE5 socket will cost the OP £116.33 plus a callout charge of £99.88 per hour.
|
|
|
Yes someone in a different thread poined out that the true cost is a lot more then the £25 item at the bottom of the pricelist. Apparently it can easily cost about £200.
Given than my revised answer would be - it's only two wires so how hard do you think it can be?
If you can't fix it with a hammer you've got an electrical problem.
|